- 07 5月, 2010 2 次提交
-
-
由 Eric Blake 提交于
* bootstrap.conf (gnulib_modules): Add uname. * configure.ac: Drop uname and sys/utsname.h checks. * src/nodeinfo.c (nodeGetInfo): Use uname unconditionally.
-
由 Eric Blake 提交于
Gnulib can guarantee that pthread.h exists, but for now, it is a dummy header with no support for most pthread_* functions. Modify our use of pthread to use function checks, rather than header checks, to determine how much pthread support is present. * bootstrap.conf (gnulib_modules): Add pthread. * configure.ac: Drop all pthread.h checks. Optimize function checks. Add check for pthread functions. * src/Makefile.am (libvirt_lxc_LDADD): Ensure proper link. * src/remote/remote_driver.c (remoteIOEventLoop): Depend on pthread_sigmask, now that gnulib guarantees pthread.h. * src/util/util.c (virFork): Likewise. * src/util/threads.c (threads-pthread.c): Depend on pthread_mutexattr_init, as a witness of full pthread support. * src/util/threads.h (threads-pthread.h): Likewise.
-
- 06 5月, 2010 1 次提交
-
-
由 Eric Blake 提交于
* src/qemu/qemu_monitor.c (qemuMonitorIOWriteWithFD): Work around recent clang shortcoming in analysis.
-
- 05 5月, 2010 2 次提交
-
-
由 Eric Blake 提交于
Detected by clang. POSIX requires that the second argument to va_start be the name of the last variable; and in some implementations, passing *path instead of path would dereference bogus memory instead of pulling arguments off the stack. * src/util/util.c (virBuildPathInternal): Use correct argument to va_start.
-
由 Kenneth Nagin 提交于
Support for live migration between hosts that do not share storage was added to qemu-kvm release 0.12.1. It supports two flags: -b migration without shared storage with full disk copy -i migration without shared storage with incremental copy (same base image shared between source and destination). I tested the live migration without shared storage (both flags) for native and p2p with and without tunnelling. I also verified that the fix doesn't affect normal migration with shared storage.
-
- 04 5月, 2010 12 次提交
-
-
由 Jiri Denemark 提交于
Wipe generated interface target only when reading configuration of inactive domains.
-
由 Jiri Denemark 提交于
Report VIR_ERR_OPERATION_INVALID when operation which requires running domain is called on inactive domain and vice versa.
-
由 Jiri Denemark 提交于
-
由 Jiri Denemark 提交于
Consistently use virDomainFindByUUID instead of virDomainFindByID and virDomainFindByName and report VIR_ERR_NO_DOMAIN when domain cannot be found.
-
由 Matthias Bolte 提交于
Add an empty body for virCondWaitUntil and move virPipeReadUntilEOF out of the '#ifndef WIN32' block, because it compiles fine with MinGW in combination with gnulib.
-
由 Eric Blake 提交于
Necessary on cygwin, where uid_t and gid_t are 4-byte long rather than int, causing gcc -Wformat warnings. * src/util/util.c (virFileOperationNoFork, virDirCreateNoFork) (virFileOperation, virDirCreate, virGetUserEnt): Cast uid_t and gid_t before passing to printf. * .gitignore: Ignore Windows executables.
-
由 Stefan Berger 提交于
When a filter is updated, only those interfaces must have their old rules cleared that either reference the filter directly or indirectly through another filter. Remember between the different steps of the instantiation of the filters which interfaces must be skipped. I am using a hash map to remember the names of the interfaces and store a bogus pointer to ~0 into it that need not be freed.
-
由 Stefan Berger 提交于
For the decision on whether to instantiate the rules, the check for a pending IP address learn request is not sufficient since then only the thread could instantiate the rules. So, a boolean needs to be passed when the thread instantiates the filter rules late and the IP address learn request is still pending in order to override the check for the pending learn request. If the rules are to be updated while the thread is active, this will not be done immediately but the thread will do that later on.
-
由 Eric Blake 提交于
WIN32 is always defined when __MINGW32__ is defined, but the converse is not true. WIN32 is more generic, if someone were to ever attempt porting to a microsoft compiler. This does not affect Cygwin, which intentionally does not define WIN32. * src/qemu/qemu_driver.c (qemuDomainGetBlockInfo): Use more generic flag macro. * src/storage/storage_backend.c (virStorageBackendUpdateVolTargetInfoFD) (virStorageBackendRunProgRegex): Likewise. * tools/console.h (vshRunConsole): Likewise.
-
由 Ryota Ozaki 提交于
* src/util/cgroup.c: free temporal path string before breaking loop
-
由 Eric Blake 提交于
* src/util/dnsmasq.c (dnsmasqReload): Mingw lacks kill, but is not running a dnsmasq daemon either.
-
由 Matthias Bolte 提交于
Also do some indentation clean up.
-
- 03 5月, 2010 1 次提交
-
-
由 Ryota Ozaki 提交于
[Error message] error: Failed to start domain lxc_test1 error: internal error Failed to create veth device pair: 512 The reason of the failure is that lxc driver unexpectedly re-uses an auto-assigned veth name and tries to create the created veth again. The failure will happen when a domain has multiple network interfaces and the names of those are not specified in XML. The patch fixes the problem by resetting buffers of veth names in every iteration of creating veth. * src/lxc/lxc_driver.c: prevent re-using auto-assigned veth name Reported by Kumar L Srikanth-B22348.
-
- 01 5月, 2010 1 次提交
-
-
由 Cole Robinson 提交于
<hostdev> address parsing previously attempted to detect the number base: currently it is hardcoded to base 16, which can break PCI assignment via virt-manager. Revert to the previous behavior. * src/conf/domain_conf.c: virDomainDevicePCIAddressParseXML, switch to virStrToLong_ui(bus, NULL, 0, ...) to autodetect base
-
- 30 4月, 2010 12 次提交
-
-
由 Daniel P. Berrange 提交于
This introduces a new event type VIR_DOMAIN_EVENT_ID_IO_ERROR_REASON This event is the same as the previous VIR_DOMAIN_ID_IO_ERROR event, but also includes a string describing the cause of the event. Thus there is a new callback definition for this event type typedef void (*virConnectDomainEventIOErrorReasonCallback)(virConnectPtr conn, virDomainPtr dom, const char *srcPath, const char *devAlias, int action, const char *reason, void *opaque); This is currently wired up to the QEMU block IO error events * daemon/remote.c: Dispatch IO error events to client * examples/domain-events/events-c/event-test.c: Watch for IO error events * include/libvirt/libvirt.h.in: Define new IO error event ID and callback signature * src/conf/domain_event.c, src/conf/domain_event.h, src/libvirt_private.syms: Extend API to handle IO error events * src/qemu/qemu_driver.c: Connect to the QEMU monitor event for block IO errors and emit a libvirt IO error event * src/remote/remote_driver.c: Receive and dispatch IO error events to application * src/remote/remote_protocol.x: Wire protocol definition for IO error events * src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h, src/qemu/qemu_monitor_json.c: Watch for BLOCK_IO_ERROR event from QEMU monitor
-
由 Jiri Denemark 提交于
-
由 Stefan Berger 提交于
Prevent updating and tearing down of filter while the IP address learning thread is running and has its own filtering rules applied.
-
由 Stefan Berger 提交于
Introduce a function to notify the IP address learning thread to terminate and thus release the lock on the interface. Notify the thread before grabbing the lock on the interface and tearing down the rules. This prevents a 'virsh destroy' to tear down the rules that the IP address learning thread has applied.
-
由 Stefan Berger 提交于
The functions invoked by the IP address learning thread that apply some basic filtering rules did not clean up any previous filtering rules that may still be there (due to a libvirt restart for example). With the patch below all the rules are cleaned up first. Also, I am introducing a function to drop all traffic in case the IP address learning thread could not apply the rules.
-
由 Daniel Veillard 提交于
* src/util/util.c: as it's used for checking things like .iso suffixes
-
由 Stefan Berger 提交于
The local DHCP server on virtbr0 sends DHCP ACK messages when a VM is started and requests an IP address while the initial DHCP lease on the VM's MAC address hasn't expired. So, also pick the IP address of the VM if that type of message is seen. Thanks to Gerhard Stenzel for providing a test case for this. Changes from V1 to V2: - cleanup: replacing DHCP option numbers through constants
-
由 Jim Meyering 提交于
* src/qemu/qemu_driver.c (qemudDomainSaveFlag): Remove dead store to "rc".
-
由 Daniel P. Berrange 提交于
When using -device syntax, the IO event will have a different prefix, 'drive-' that needs to be skipped over before matching against the libvirt disk alias * src/qemu/qemu_driver.c: Skip QEMU_DRIVE_HOST_PREFIX in IO event
-
由 Daniel P. Berrange 提交于
* src/qemu/qemu_driver.c: Implementation of virDomainGetBlockInfo * src/util/storage_file.h: Add DEV_BSIZE * src/storage/storage_backend.c: Remove DEV_BSIZE
-
由 Daniel P. Berrange 提交于
* daemon/remote.c: Server side dispatcher * daemon/remote_dispatch_args.h, daemon/remote_dispatch_prototypes.h, daemon/remote_dispatch_ret.h, daemon/remote_dispatch_table.h: Update with new API * src/remote/remote_driver.c: Client side dispatcher * src/remote/remote_protocol.c, src/remote/remote_protocol.h: Update * src/remote/remote_protocol.x: Define new wire protocol
-
由 Daniel P. Berrange 提交于
This defines the internal driver API and stubs out each driver * src/driver.h: Define virDrvDomainGetBlockInfo signature * src/libvirt.c, src/libvirt_public.syms: Glue public API to drivers * src/esx/esx_driver.c, src/lxc/lxc_driver.c, src/opennebula/one_driver.c, src/openvz/openvz_driver.c, src/phyp/phyp_driver.c, src/test/test_driver.c, src/uml/uml_driver.c, src/vbox/vbox_tmpl.c, src/xen/xen_driver.c, src/xenapi/xenapi_driver.c: Stub out driver
-
- 29 4月, 2010 7 次提交
-
-
由 Chris Lalancette 提交于
qemuDomainPCIAddressSetFree was freeing up the hash table for the pci addresses, but not freeing up the addr structure. Looking over the callers of this function, it seems like they expect it to also free up the structure, so do that here. Signed-off-by: NChris Lalancette <clalance@redhat.com>
-
由 Chris Lalancette 提交于
We were over-writing a pointer without freeing it in case of a disk device, leading to a memory leak. Signed-off-by: NChris Lalancette <clalance@redhat.com>
-
由 Chris Lalancette 提交于
When building on Ubuntu with make -j3 (or more), it would always fail when trying to build virt-aa-helper. I'm not an expert in automake by any means, but I think the entry for virt-aa-helper is mis-using LDADD; it shouldn't be putting direct paths to libvirt_conf.la and libvirt_util.la, but instead referencing those names. With this patch in place, I'm able to successfully build on Ubuntu 9.04 with make -j3. Signed-off-by: NChris Lalancette <clalance@redhat.com>
-
由 Chris Lalancette 提交于
Signed-off-by: NChris Lalancette <clalance@redhat.com>
-
由 Daniel P. Berrange 提交于
The previous commit changes a goto from 'endjob' to 'cleanup', leaving the endjob label unused. Remove it to avoid compile warning. * src/qemu/qemu_driver.c: Remove 'endjob' label
-
由 Jim Meyering 提交于
* src/qemu/qemu_driver.c (qemuDomainSnapshotCreateXML): When setting "vm" to NULL, jump over vm-dereferencing code to "cleanup". (qemuDomainRevertToSnapshot): Likewise.
-
由 Jim Meyering 提交于
* src/qemu/qemu_driver.c (qemudDomainCreate): Goto cleanup, not "endjob", since we know "vm" is already NULL. No semantic change.
-
- 28 4月, 2010 2 次提交
-
-
由 Daniel Veillard 提交于
use /var/lib/libvirt/dnsmasq since /var/lib/libvirt/network is unreadable by the dnsmasq binary * src/network/bridge_driver.c: update DNSMASQ_STATE_DIR * src/Makefile.am: create it on make install * libvirt.spec.in: take the new directory into account
-
由 Daniel P. Berrange 提交于
In cases where the security driver failed to restore a label after a guest has saved, we mistakenly jumped to the error cleanup paths. This is not good, because the operation has in fact completed and cannot be rolled back completely. Label restore is non-critical, so just log the problem instead. Also add a missing restore call in the error cleanup path * src/qemu/qemu_driver.c: Fix handling of security driver restore failures in QEMU domain save
-