When I added support for the pcie-expander-bus controller in commit
bc07251f, I incorrectly thought that it only had a single slot
available. Actually it has 32 slots, just like the root complex aka
pcie-root (the part that I *did* get correct is that unlike pcie-root
a pcie-expander-bus doesn't allow any integrated endpoint devices -
only pcie-root-ports and dmi-to-pci-controllers are allowed).

(cherry picked from commit 22afd441)

If this reminds you of a commit message from around a year ago, it's
41c2aa72 and yes, we're dealing with
"the same thing" again.  Or f309db1f and
it's similar.

There is a logic in place that if there is no real need for
memory-backend-file, qemuBuildMemoryBackendStr() returns 0.  However
that wasn't the case with hugepage backing.  The reason for that was
that we abused the 'pagesize' variable for storing that information, but
we should rather have a separate one that specifies whether we really
need the new object for hugepage backing.  And that variable should be
set only if this particular NUMA cell needs special treatment WRT
hugepages.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1372153Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
(cherry picked from commit 4372a7845acbc6974f6027ef68e7dd3eeb47f425)

* docs/news.html.in: update for release
* po/*po*: regenerate

--postcopy-after-precopy is just an aditional flag for
postcopy migration.
Signed-off-by: NKothapally Madhu Pavan <kmp@linux.vnet.ibm.com>

When we wanted to break huge and unmaintainable virsh into
smaller files first thing we did was to just move funcs into
virsh-.c files and then #include them from virsh. Having it done
this way we also needed to have them listed under EXTRA_DIST.
However, things got changed since then and now all the virsh-*.c
files are proper source files. Therefore they are listed under
virsh_SOURCES too. But for some reason we forgot to remove them
from EXTRA_DIST.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

The libxl driver has long supported migration V3 but has never
indicated so in the connectSupportsFeature API. As a result, apps
such as virt-manager that use the more generic virDomainMigrate API
fail with

libvirtError: this function is not supported by the connection driver:
virDomainMigrate

Add VIR_DRV_FEATURE_MIGRATION_V3 to the list of features marked as
supported in the connectSupportsFeature API.

Test 12 from objecteventtest (createXML add event) segaults on FreeBSD
with bus error.

At some point it calls testNodeDeviceDestroy() from the test driver. And
it fails when it tries to unlock the device in the "out:" label of this
function.

Unlocking fails because the previous step was a call to
virNodeDeviceObjRemove from conf/node_device_conf.c. This function
removes the given device from the device list and cleans up the object,
including destroying of its mutex. However, it does not nullify the pointer
that was given to it.

As a result, we end up in testNodeDeviceDestroy() here:

 out:
    if (obj)
        virNodeDeviceObjUnlock(obj);

And instead of skipping this, we try to do Unlock and fail because of
malformed mutex.

Change virNodeDeviceObjRemove to use double pointer and set pointer to
NULL.

As bhyve currently doesn't use controller addressing and simply
uses 1 implicit controller for 1 disk device, the scheme looks the
following:

 pci addrees -> (implicit controller) -> disk device

So in fact we identify disk devices by pci address of implicit
controller and just pass it this way to bhyve in a form:

 -s pci_addr,ahci-(cd|hd),/path/to/disk

Therefore, we cannot use virDeviceInfoPCIAddressWanted() because it
does not expect that disk devices might need PCI address assignment.

As a result, if a disk was specified without address, it will not be
generated and domain will to start.

Until proper controller addressing is implemented in the bhyve
driver, force each disk to have PCI address generated if it was not
specified by user.

Unlike postcopy migration there is no --live flag check for
postcopy-after-precopy.
Signed-off-by: NKothapally Madhu Pavan <kmp@linux.vnet.ibm.com>

The iothread example for virtio-scsi should be
<driver iothread='4'/> rather than <driver iothread='4'>
for the XML to be valid.

../../src/conf/domain_conf.c:4425:21: error: potential null pointer dereference [-Werror=null-dereference]
         switch (vcpu->hotpluggable) {
                 ~~~~^~~~~~~~~~~~~~

Setting vcpu count when cpu topology is specified may result into an
invalid configuration. Since the topology can't be modified, reject the
setting if it doesn't match the requested topology. This will allow
fixing the topology in case it was broken.

Partially fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1370066

Validating the vcpu count is more intricate and doing it in the XML
parser will make previously valid configs (with older qemus) vanish.

Now that we have a very similar check in the qemu domain validation
callback we can do it in a more appropriate place.

This basically reverts commit b54de083.

Partially resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1370066

Make it clear that vcpu order is valid for online vcpus only and state
that it has to be specified for all vcpus or not provided at all.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1370043

ce43cca0 refactored the helper to prepare it for sparse topologies but
forgot to fix the iterator used to fill the structures. This would
result into a weirdly sparse populated array and possible out of bounds
access and crash once sparse vcpu topologies were allowed.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1369988

virVcpuInfo contains the vcpu number that the data refers to. Report
what's returned by the daemon rather than the sequence number as with
sparse vcpu topologies they won't match.

We should query bus type for containers too, like for VM.
In openstack we add volume disk like SCSI, so we can't
hardcode SATA bus.

While dettaching/attaching device in OpenStack, nova
calls vzDomainDettachDevice twice, because the update of the internal
configuration of the ct comes a bit latter than the update event.
As the result, we suffer from the second call to dettach the same device.
Signed-off-by: NOlga Krishtal <okrishtal@virtuozzo.com>

libvirt-python passes parameter bandwidth = 0
by default. This means that bandwidth is unlimited.
VZ driver doesn't support bandwidth rate limiting,
but we still need to handle it and fail if bandwidth > 0.
Signed-off-by: NPavel Glushchak <pglushchak@virtuozzo.com>

* Added VIR_MIGRATE_LIVE, VIR_MIGRATE_UNDEFINE_SOURCE and
  VIR_MIGRATE_PERSIST_DEST to supported migration flags
Signed-off-by: NPavel Glushchak <pglushchak@virtuozzo.com>

When support for auto-creating tap devices was added to <interface
type='ethernet'> in commit 9c17d6, the code assumed that
virNetDevTapCreate() would honor the VIR_NETDEV_TAP__CREATE_IFUP flag
that is supported by virNetDevTapCreateInBridgePort(). That isn't the
case - the latter function performs several operations, and one of
them is setting the tap device online. But virNetDevTapCreate() *only*
creates the tap device, and relies on the caller to do everything
else, so qemuInterfaceEthernetConnect() needs to call
virNetDevSetOnline() after the device is successfully created.

The linkstate setting of an <interface> is only meant to change the
online status reported to the guest system by the emulated network
device driver in qemu, but when support for auto-creating tap devices
for <interface type='ethernet'> was added in commit 9717d6, a chunk of
code was also added to qemuDomainChangeNetLinkState() that sets the
online status of the tap device (i.e. the *host* side of the
interface) for type='ethernet'. This was never done for tap devices
used in type='bridge' or type='network' interfaces, nor was it done in
the past for tap devices created by external scripts for
type='ethernet', so we shouldn't be doing it now.

This patch removes the bit of code in qemuDomainChangeNetLinkState()
that modifies online status of the tap device.

The call to virNetDevIPInfoAddToDev() that sets up tap device IP
addresses and routes was somehow incorrectly placed in
qemuInterfaceStopDevice() instead of qemuInterfaceStartDevice() in
commit fe8567f6.  This fixes that error by moving the call to
virNetDevIPInfoAddToDev() to qemuInterfaceStartDevice().
Signed-off-by: NVasiliy Tolstov <v.tolstov@selfip.ru>

This patch removes the old vcpu unplug code completely and replaces it
with the new code using device_del. The old hotplug code basically never
worked with any recent qemu and thus is useless.

As the new code is using device_del all the implications of using it
are present. Contrary to the device deletion code, the vcpu deletion
code fails if the unplug request is not executed in time.

Add a overlay function that takes the alias directly rather than
extracting it from a device info.

To allow unplugging the vcpus, hotplugging of vcpus on platforms which
require to plug multiple logical vcpus at once or plugging them in an
arbitrary order it's necessary to use the new device_add interface for
vcpu hotplug.

This patch adds support for the device_add interface using the old
setvcpus API by implementing an algorithm to select the appropriate
entities to plug in.

Add support for using the new approach to hotplug vcpus using device_add
during startup of qemu to allow sparse vcpu topologies.

There are a few limitations imposed by qemu on the supported
configuration:
- vcpu0 needs to be always present and not hotpluggable
- non-hotpluggable cpus need to be ordered at the beginning
- order of the vcpus needs to be unique for every single hotpluggable
  entity

Qemu also doesn't really allow to query the information necessary to
start a VM with the vcpus directly on the commandline. Fortunately they
can be hotplugged during startup.

The new hotplug code uses the following approach:
- non-hotpluggable vcpus are counted and put to the -smp option
- qemu is started
- qemu is queried for the necessary information
- the configuration is checked
- the hotpluggable vcpus are hotplugged
- vcpus are started

This patch adds a lot of checking code and enables the support to
specify the individual vcpu element with qemu.

The vcpu order information is extracted only for hotpluggable entities,
while vcpu definitions belonging to the same hotpluggable entity need
to all share the order information.

We also can't overwrite it right away in the vcpu info detection code as
the order is necessary to add the hotpluggable vcpus enabled on boot in
the correct order.

The helper will store the order information in places where we are
certain that it's necessary.

For use on the monitor we need to format certain parts of the vcpu
private definition into a JSON object. Add a helper.

Introduce a new migration cookie flag that will be used for any
configurations that are not compatible with libvirt that would not
support the specific vcpu hotplug approach. This will make sure that old
libvirt does not fail to reproduce the configuration correctly.

Individual vCPU hotplug requires us to track the state of any vCPU. To
allow this add the following XML:

<domain>
  ...
  <vcpu current='2'>3</vcpu>
  <vcpus>
    <vcpu id='0' enabled='yes' hotpluggable='no' order='1'/>
    <vcpu id='1' enabled='yes' hotpluggable='yes' order='2'/>
    <vcpu id='1' enabled='no' hotpluggable='yes'/>
  </vcpus>
  ...

The 'enabled' attribute allows to control the state of the vcpu.
'hotpluggable' controls whether given vcpu can be hotplugged and 'order'
allows to specify the order to add the vcpus.

Similarly to devices the guest may allow unplug of the VCPU if libvirt
is down. To avoid problems, refresh the vcpu state on reconnect. Don't
mess with the vcpu state otherwise.

Now that the monitor code gathers all the data we can extract it to
relevant places either in the definition or the private data of a vcpu.

As only thread id is broken for TCG guests we may extract the rest of
the data and just skip assigning of the thread id. In case where qemu
would allow cpu hotplug in TCG mode this will make it work eventually.

The reported data is unusual so add it to the test suite.

Test the algorithm that extracts the order in which the vcpu entries
were plugged in on a sample of data created by plugging in vcpus
arbitrarily.

Power 8 platform's basic hotpluggable unit is a core rather than a
thread for x86_64 family. This introduces most of the complexity of the
matching code and thus needs to be tested.

The test data contain data captured from in-order cpu hotplug and
unplug operations.

During review it was reported that adding at least 11 vcpus creates a
collision of prefixes in the monitor matching algorithm. Add a test case
to verify that the problem won't happen.

As the combination algorithm is rather complex and ugly it's necessary
to make sure it works properly. Add test suite infrastructure for
testing it along with a basic test based on x86_64 platform.