It's simpler to render and it prevents wrapping the line too early
because of the table spacing, border et cetera.

When a function has no associated information to one of its
arguments or its return type we report it and stop with an error.

When an exception happened inside the try clause in serialize_function,
a new exception was raised in the except clause subsequently:

Traceback (most recent call last):
  File "./apibuild.py", line 2529, in <module>
    rebuild("libvirt")
  File "./apibuild.py", line 2513, in rebuild
    builder.serialize()
  File "./apibuild.py", line 2467, in serialize
    self.serialize_function(output, function)
  File "./apibuild.py", line 2208, in serialize_function
    self.warning("Failed to save function %s info: " % name, `id.info`)
TypeError: warning() takes exactly 2 arguments (3 given)

Use the correct number of arguments for self.warning and print the
original exception to stderr.

After one last-minute change, only HACKING was updated and not
hacking.html.in, so this patch synchronizes that.

* configure.ac docs/news.html.in libvirt.spec.in: update for the release
* po/*.po*: updated localizations

Adding dots inside "exempli gratia" where missing.  While on that, I
took the liberty of changing it where found with simple grep.

Commit f24404a3 renamed virterror.c to
virerror.c but forgot to change the reference in this file.

The "volName" will be used by later patch.

The RE for data type "name" storagepool.rng uses is same with
"genericName" in basictypes.rng.

Hosts for rbd are ceph monitor daemons. These have fixed IP addresses,
so they are often referenced by IP rather than hostname for
convenience, or to avoid relying on DNS. Using IPv4 addresses as the
host name works already, but IPv6 addresses require rbd-specific
escaping because the colon is used as an option separator in the
string passed to qemu.

Escape these colons, and enclose the IPv6 address in square brackets
so it is distinguished from the port, which is currently mandatory.
Acked-by: NOsier Yang <jyang@redhat.com>
Signed-off-by: NJosh Durgin <josh.durgin@inktank.com>

This patch adds RNG schemas for adding more information in the topology
output of the NUMA section in the capabilities XML.

The added elements are designed to provide more information about the
placement and topology of the processors in the system to management
applications.

A demonstration of supported XML added by this patch:
<capabilities>
  <host>
    <topology>
      <cells num='3'>
        <cell id='0'>
          <cpus num='4'> <!-- this is node with Hyperthreading -->
            <cpu id='0' socket_id='0' core_id='0' siblings='0-1'/>
            <cpu id='1' socket_id='0' core_id='0' siblings='0-1'/>
            <cpu id='2' socket_id='0' core_id='1' siblings='2-3'/>
            <cpu id='3' socket_id='0' core_id='1' siblings='2-3'/>
          </cpus>
        </cell>
        <cell id='1'>
          <cpus num='4'> <!-- this is node with modules (Bulldozer) -->
            <cpu id='4' socket_id='0' core_id='2' siblings='4-5'/>
            <cpu id='5' socket_id='0' core_id='3' siblings='4-5'/>
            <cpu id='6' socket_id='0' core_id='4' siblings='6-7'/>
            <cpu id='7' socket_id='0' core_id='5' siblings='6-7'/>
          </cpus>
         </cell>
        <cell id='2'>
          <cpus num='4'> <!-- this is a normal multi-core node -->
            <cpu id='8' socket_id='1' core_id='0' siblings='8'/>
            <cpu id='9' socket_id='1' core_id='1' siblings='9'/>
            <cpu id='10' socket_id='1' core_id='2' siblings='10'/>
            <cpu id='11' socket_id='1' core_id='3' siblings='11'/>
          </cpus>
         </cell>
      </cells>
    </topology>
  </host>
</capabilities>

The socket_id field represents identification of the physical socket the
CPU is plugged in. This ID may not be identical to the physical socket
ID reported by the kernel.

The core_id identifies a core within a socket. Also this field may not
accurately represent physical ID's.

The core_id is guaranteed to be unique within a cell and a socket. There
may be duplicates between sockets. Only cores sharing core_id within one
cell and one socket can be considered as threads. Cores sharing core_id
within sparate cells are distinct cores.

The siblings field is a list of CPU id's the cpu id's the CPU is sibling
with - thus a thread. The list is in the cpuset format.

Just add the head line to let the editor know it's XML document.

Adds a "ram" attribute globally to the video.model element, that changes
the resulting qemu command line only if video.type == "qxl".

<video>
  <model type='qxl' ram='65536' vram='65536' heads='1'/>
</video>

That attribute gets a default value of 64*1024. The schema is unchanged
for other video element types.

The resulting qemu command line change is the addition of

-global qxl-vga.ram_size=<ram>*1024

or

-global qxl.ram_size=<ram>*1024

For the main and secondary qxl devices respectively.

The default for the qxl ram bar is 64*1024 kilobytes (the same as the
default qxl vram bar size).

Added missing entries to makefile and spec.
Signed-off-by: NViktor Mihajlovski <mihajlov@linux.vnet.ibm.com>

Signed-off-by: NClaudio Bley <cbley@av-test.de>

Use of <tt> is discouraged in HTML 4.x and has finally been obsoleted
in HTML 5. Likewise for the <i> tag.

Using tables for layout is (widely) considered bad style, too.

Use defintion lists, definition term and defintion description
elements instead.
Signed-off-by: NClaudio Bley <cbley@av-test.de>

In CSS the following class names are available:

* keyword     (keywords like "typedef", "struct")
* type        (types like "int", "void*")
* comment     (comments after members of enums or structs)
* directive   (preprocessor directives, #define)
* undisclosed (text saying that the API is not public)

Additionally, kill all of the left-over "programlisting" class
assignments. There are no CSS rules for them.
Signed-off-by: NClaudio Bley <cbley@av-test.de>

This patch introduces support for LXC specific public APIs. In
common with what was done for QEMU, this creates a libvirt_lxc.so
library and libvirt/libvirt-lxc.h header file.

The actual APIs are

  int virDomainLxcOpenNamespace(virDomainPtr domain,
                                int **fdlist,
                                unsigned int flags);

  int virDomainLxcEnterNamespace(virDomainPtr domain,
                                 unsigned int nfdlist,
                                 int *fdlist,
                                 unsigned int *noldfdlist,
                                 int **oldfdlist,
                                 unsigned int flags);

which provide a way to use the setns() system call to move the
calling process into the container's namespace. It is not
practical to write in a generically applicable manner. The
nearest that we could get to such an API would be an API which
allows to pass a command + argv to be executed inside a
container. Even if we had such a generic API, this LXC specific
API is still useful, because it allows the caller to maintain
the current process context, in particular any I/O streams they
have open.

NB the virDomainLxcEnterNamespace() API is special in that it
runs client side, so does not involve the internal driver API.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

When parsing the top level comment of a file, apibuild.py used
to split on any ':' character of a line regarding the first part
as a key for a setting, e.g. "Summary". The second part would then
be assigned as the value for that key.

This means you could not use a ':' character inside those comments
without ill effects.

Now, a key must consist solely of alphanumeric characters, '_' or '.'.

I've noticed a number of people sending patches with file
renames not compressed, so we might as well document how to
set this up.  (Git won't do it by default, for back-compat
reasons)

* docs/hacking.html.in: Add git config tip.
* HACKING: Regenerate.

Based on a suggestion by John Ferlan:
https://www.redhat.com/archives/libvir-list/2013-January/msg00158.html

* docs/hacking.html.in: Add some commit message instructions.
Mention the ./run script.
* HACKING: Regenerate.

This was preventing make rpm from completing.

Add an optional 'type' attribute to <target> element of serial port
device. There are two choices for its value, 'isa-serial' and
'usb-serial'. For backward compatibility, when attribute 'type' is
missing the 'isa-serial' will be chosen as before.

Libvirt XML sample

    <serial type='pty'>
      <target type='usb-serial' port='0'/>
      <address type='usb' bus='0' port='1'/>
    </serial>

qemu commandline:

qemu ${other_vm_args}              \
    -chardev pty,id=charserial0    \
    -device usb-serial,chardev=charserial0,id=serial0,bus=usb.0,port=1

Libvirt's HTML documentation is not as easy to the eyes as it could
be since long text has no visual breaks.

Take advantage of the formatting in documentation comments and wrap
each part separated by two consecutive \n into a HTML <p> element.

The SCLP console is the native console type for s390 and is preferred
over the virtio console as it doesn't require special drivers and
is more efficient. Recent versions of QEMU come with SCLP support
which is hereby enabled.

The new target types 'sclp' and 'sclplm' can be used to specify a
SCLP console. Adding documentation, domain schema and XML processing
support.
Signed-off-by: NJ.B. Joret <jb@linux.vnet.ibm.com>
Signed-off-by: NViktor Mihajlovski <mihajlov@linux.vnet.ibm.com>

This introduces new XML tag "sgio" for disk, its valid values
are "filtered" and "unfiltered", setting it as "filtered" will
set the disk's unpriv_sgio to 0, and "unfiltered" to set it
as 1, which allows the unprivileged SG_IO commands.

The <hostdev> device type has long had a redundant "mode"
attribute, which has always been "subsys". This finally
introduces a new mode "capabilities", which will be used
by the LXC driver for device assignment. Since container
based virtualization uses a single kernel, the idea of
assigning physical PCI devices doesn't make sense. It is
still reasonable to assign USB devices, but for assigning
arbitrary nodes in /dev, the new 'capabilities' mode is
to be used.

The first capability support is 'storage', which is for
assignment of block devices. Functionally this is really
pretty similar to the <disk> support. The only difference
is the device node name is identical in both host and
container namespaces.

    <hostdev mode='capabilities' type='storage'>
      <source>
        <block>/dev/sdf1</block>
      </source>
    </hostdev>

The second capability support is 'misc', which is for
assignment of character devices. There is no existing
parallel to this. Again the device node is the same
inside & outside the container.

    <hostdev mode='capabilities' type='misc'>
      <source>
        <char>/dev/input/event3</char>
      </source>
    </hostdev>

The reason for keeping the char & storage devices
separate in the domain XML, is to mirror the split
in the node device XML. NB the node device XML does
not yet report character devices, but that's another
new patch to come
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

If there are multiple video devices
primary = 'yes' marks this video device as the primary one.
The rest are secondary video devices. No more than one could be
mark as primary. If none of them has primary attribute, the first
one will be the primary by default like what it was.
The reason of this changing is that for qemu, only one primary video
device is permitted which can be of any type. For secondary video
devices, only qxl is allowd. Primary attribute removes the restriction
that the first have to be the primary one.

We always put the primary video device into the first position of
video device structure array after parsing.

- configure.ac docs/news.html.in: update for the release
- po/*.po: updated from transifex

As detected in https://bugzilla.redhat.com/show_bug.cgi?id=887187

* docs/formatdomain.html.in: Fix XML typos.