Skip to content

L
libvirt

openeuler / libvirt

通知 3
Star 0
Fork 0
L
libvirt

体验新版 GitCode，发现更多精彩内容 >>

切换分支/标签
  1. 25 2月, 2015 2 次提交
    • J
      Assign default SCSI controller model before checking attribute validity · 52a166f4
      由 Ján Tomko 提交于 
      If the qemu binary on x86 does not support lsi SCSI controller,
but it supports virtio-scsi, we reject the virtio-specific attributes
for no reason.

Move the default controller assignment before the check.

https://bugzilla.redhat.com/show_bug.cgi?id=1168849
      52a166f4
    • M
      qemu: Use correct flags for ABI stability check in SaveImageUpdateDef · cf2d4c60
      由 Michal Privoznik 提交于 
      https://bugzilla.redhat.com/show_bug.cgi?id=1183869

Soo. you've successfully started yourself a domain. And since you want
to use it on your host exclusively you are confident enough to
passthrough the host CPU model, like this:

  <cpu mode='host-passthrough'/>

Then, after a while, you want to save the domain into a file (e.g.
virsh save dom dom.save). And here comes the trouble. The file consist
of two parts: Libvirt header (containing domain XML among other
things), and qemu migration data. Now, the domain XML in the header is
formatted using special flags (VIR_DOMAIN_XML_SECURE |
VIR_DOMAIN_XML_UPDATE_CPU | VIR_DOMAIN_XML_INACTIVE |
VIR_DOMAIN_XML_MIGRATABLE).

Then, on your way back from the bar, you think of changing something
in the XML in the saved file (we have a command for it after all), say
listen address for graphics console. So you successfully type in the
command:

  virsh save-image-edit dom.save

Change all the bits, and exit the editor. But instead of success
you're left with sad error message:

  error: unsupported configuration: Target CPU model <null> does not
  match source Pentium Pro

Sigh. Digging into the code you see lines, where we check for ABI
stability. The new XML you've produced is compared with the old one
from the saved file to see if qemu ABI will break or not. Wait, what?
We are using different flags to parse the XML you've provided so we
were just lucky it worked in some cases? Yep, that's right.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
      cf2d4c60
  3. 24 2月, 2015 3 次提交
  5. 22 2月, 2015 1 次提交
  7. 21 2月, 2015 11 次提交
  9. 20 2月, 2015 2 次提交
  11. 19 2月, 2015 4 次提交
    • M
      qemuMigrationDriveMirror: Listen to events · 80c5f10e
      由 Michal Privoznik 提交于 
      https://bugzilla.redhat.com/show_bug.cgi?id=1179678

When migrating with storage, libvirt iterates over domain disks and
instruct qemu to migrate the ones we are interested in (shared, RO and
source-less disks are skipped). The disks are migrated in series. No
new disk is transferred until the previous one hasn't been quiesced.
This is checked on the qemu monitor via 'query-jobs' command. If the
disk has been quiesced, it practically went from copying its content
to mirroring state, where all disk writes are mirrored to the other
side of migration too. Having said that, there's one inherent error in
the design. The monitor command we use reports only active jobs. So if
the job fails for whatever reason, we will not see it anymore in the
command output. And this can happen fairly simply: just try to migrate
a domain with storage. If the storage migration fails (e.g. due to
ENOSPC on the destination) we resume the host on the destination and
let it run on partly copied disk.

The proper fix is what even the comment in the code says: listen for
qemu events instead of polling. If storage migration changes state an
event is emitted and we can act accordingly: either consider disk
copied and continue the process, or consider disk mangled and abort
the migration.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
      80c5f10e
    • M
      qemuProcessHandleBlockJob: Take status into account · 76c61cdc
      由 Michal Privoznik 提交于 
      Upon BLOCK_JOB_COMPLETED event delivery, we check if the job has
completed (in qemuMonitorJSONHandleBlockJobImpl()). For better image,
the event looks something like this:

"timestamp": {"seconds": 1423582694, "microseconds": 372666}, "event":
"BLOCK_JOB_COMPLETED", "data": {"device": "drive-virtio-disk0", "len":
8412790784, "offset": 409993216, "speed": 8796093022207, "type":
"mirror", "error": "No space left on device"}}

If "len" does not equal "offset" it's considered an error, and we can
clearly see "error" field filled in. However, later in the event
processing this case was handled no differently to case of job being
aborted via separate API. It's time that we start differentiate these
two because of the future work.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
      76c61cdc
    • M
      qemuProcessHandleBlockJob: Set disk->mirrorState more often · c37943a0
      由 Michal Privoznik 提交于 
      Currently, upon BLOCK_JOB_* event, disk->mirrorState is not updated
each time. The callback code handling the events checks if a blockjob
was started via our public APIs prior to setting the mirrorState.
However, some block jobs may be started internally (e.g. during
storage migration), in which case we don't bother with setting
disk->mirror (there's nothing we can set it to anyway), or other
fields. But it will come handy if we update the mirrorState in these
cases too. The event wasn't delivered just for fun - we've started the
job after all.

So, in this commit, the mirrorState is set to whatever job status
we've obtained. Of course, there are some actions on some statuses
that we want to perform. But instead of if {} else if {} else {} ...
enumeration, let's move to switch().
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
      c37943a0
    • P
      qemu: Exit job on error path of qemuDomainSetVcpusFlags() · 0df2f040
      由 Peter Krempa 提交于 
      Commit e105dc98 moved some code but
didn't adjust the jump labels so that the job would be terminated.
      0df2f040
  13. 17 2月, 2015 5 次提交
  15. 13 2月, 2015 2 次提交
  17. 12 2月, 2015 3 次提交
    • D
      qemu: do upfront check for vcpupids being null when querying pinning · 9358b63a
      由 Daniel P. Berrange 提交于 
      The qemuDomainHelperGetVcpus attempted to report an error when the
vcpupids info was NULL. Unfortunately earlier code would clamp the
value of 'maxinfo' to 0 when nvcpupids was 0, so the error reporting
would end up being skipped.

This lead to 'virsh vcpuinfo <dom>' just returning an empty list
instead of giving the user a clear error.
      9358b63a
    • D
      qemu: fix setting of VM CPU affinity with TCG · a103bb10
      由 Daniel P. Berrange 提交于 
      If a previous commit I fixed the incorrect handling of vcpu pids
for TCG mode QEMU:

  commit b07f3d82
  Author: Daniel P. Berrange <berrange@redhat.com>
  Date:   Thu Dec 18 16:34:39 2014 +0000

    Don't setup fake CPU pids for old QEMU

    The code assumes that def->vcpus == nvcpupids, so when we setup
    fake CPU pids for old QEMU with nvcpupids == 1, we cause the
    later code to read off the end of the array. This has fun results
    like sche_setaffinity(0, ...) which changes libvirtd's own CPU
    affinity, or even better sched_setaffinity($RANDOM, ...) which
    changes the affinity of a random OS process.

The intent was that this would merely disable the ability to set
per-vCPU affinity. It should still have been possible to set VM
level host CPU affinity.

Unfortunately, when you set  <vcpu cpuset='0-1'>4</vcpu>, the XML
parser will internally take this & initialize an entry in the
def->cputune.vcpupin array for every VCPU. IOW this is implicitly
being treated as

  <cputune>
    <vcpupin cpuset='0-1' vcpu='0'/>
    <vcpupin cpuset='0-1' vcpu='1'/>
    <vcpupin cpuset='0-1' vcpu='2'/>
    <vcpupin cpuset='0-1' vcpu='3'/>
  </cputune>

Even more fun, the faked cputune elements are hidden from view when
querying the live XML, because their cpuset mask is the same as the
VM default cpumask.

The upshot was that it was impossible to set VM level CPU affinity.

To fix this we must update qemuProcessSetVcpuAffinities so that it
only reports a fatal error if the per-VCPU cpu mask is different
from the VM level cpu mask.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
      a103bb10
    • M
      qemu: Add support for setting vCPU and I/O thread scheduler setting · 104ba596
      由 Martin Kletzander 提交于 
      Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1178986Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
      104ba596
  19. 11 2月, 2015 2 次提交
  21. 10 2月, 2015 5 次提交