- 24 6月, 2016 3 次提交
-
-
由 Peter Krempa 提交于
Extract information for all disks and update tray state and source only for removable drives. Additionally store whether a drive is removable and whether it has a tray. (cherry picked from commit 894dc85f)
-
由 Peter Krempa 提交于
Extract whether a given drive has a tray and whether there is no image inserted. Negative logic for the image insertion is chosen so that the flag is set only if we are certain of the fact. (cherry picked from commit f1690dc3)
-
由 Peter Krempa 提交于
(cherry picked from commit 5f963d89)
-
- 04 4月, 2016 2 次提交
-
-
由 Martin Kletzander 提交于
The paths have the domain ID in them. Without cleaning them, they would contain the same ID even after multiple restarts. That could cause various problems, e.g. with access. Add function qemuDomainClearPrivatePaths() for this as a counterpart of qemuDomainSetPrivatePaths(). Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
由 Martin Kletzander 提交于
Since commit 9dca74ee, the function can take driver and a vm, no need to overcomplicate. Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
- 29 3月, 2016 3 次提交
-
-
由 Peter Krempa 提交于
Move the function to qemu_domain.c and export them for further use.
-
由 Peter Krempa 提交于
The function has terrible semantics. Split it into two functions.
-
由 Qiaowei Ren 提交于
This patch implement the internal driver API for perf event into qemu driver. Signed-off-by: NQiaowei Ren <qiaowei.ren@intel.com> Message-id: 1459171833-26416-5-git-send-email-qiaowei.ren@intel.com
-
- 21 3月, 2016 1 次提交
-
-
由 Cristian Klein 提交于
Signed-off-by: NCristian Klein <cristiklein@gmail.com> Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
-
- 10 3月, 2016 1 次提交
-
-
由 Daniel P. Berrange 提交于
If use of virtlogd is enabled, then use it for backing the character device log files too. This avoids the possibility of a guest denial of service by writing too much data to the log file.
-
- 08 3月, 2016 2 次提交
-
-
由 Jiri Denemark 提交于
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
-
由 Jiri Denemark 提交于
With a very old QEMU which doesn't support events we need to explicitly call qemuMigrationSetOffline at the end of migration to update our internal state. On the other hand, if we talk to QEMU using QMP, we should just wait for the STOP event and let the event handler update the state and trigger a libvirt event. Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
-
- 01 3月, 2016 2 次提交
-
-
由 Jiri Denemark 提交于
When SPICE graphics is configured for a domain but we did not ask the client to switch to the destination, we should not wait for SPICE_MIGRATE_COMPLETED event (which will never come). https://bugzilla.redhat.com/show_bug.cgi?id=1151723Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
-
由 Martin Kletzander 提交于
Per-domain directories were introduced in order to be able to completely separate security labels for each domain (commit f1f68ca3). However when the domain name is long (let's say a ridiculous 110 characters), we cannot connect to the monitor socket because on length of UNIX socket address is limited. In order to get around this, let's shorten it in similar fashion and in order to avoid conflicts, throw in an ID there as well. Also save that into the status XML and load the old status XMLs properly (to clean up after older domains). That way we can change it in the future. The shortening can be seen in qemuxml2argv tests, for example in the hugepages-pages2 case. Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
- 19 2月, 2016 2 次提交
-
-
由 Jiri Denemark 提交于
Stopping a domain without a job risks a race condition with another thread which started a job a which does not expect anyone else to be messing around with the same domain object. Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
-
由 Jiri Denemark 提交于
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
-
- 17 2月, 2016 3 次提交
-
-
由 Erik Skultety 提交于
Our existing virHashForEach method iterates through all items disregarding the fact, that some of the iterators might have actually failed. Errors are usually dispatched through an error element in opaque data which then causes the original caller of virHashForEach to return -1. In that case, virHashForEach could return as soon as one of the iterators fail. This patch changes the iterator return type and adjusts all of its instances accordingly, so the actual refactor of virHashForEach method can be dealt with later. Signed-off-by: NErik Skultety <eskultet@redhat.com>
-
由 John Ferlan 提交于
Move function into qemu_domain.c.
-
由 John Ferlan 提交于
Move qemuDomainSupportsNicdev and qemuDomainSupportsNetdev into qemu_domain.c and expose from there. Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
-
- 05 2月, 2016 2 次提交
-
-
由 Martin Kletzander 提交于
So, systemd-machined has this philosophy that machine names are like hostnames and hence should follow the same rules. But we always allowed international characters in domain names. Thus we need to modify the machine name we are passing to systemd. In order to change some machine names that we will be passing to systemd, we also need to call TerminateMachine at the end of a lifetime of a domain. Even for domains that were started with older libvirt. That can be achieved thanks to virSystemdGetMachineNameByPID(). And because we can change machine names, we can get rid of the inconsistent and pointless escaping of domain names when creating machine names. So this patch modifies the naming in the following way. It creates the name as <drivername>-<id>-<name> where invalid hostname characters are stripped out of the name and if the resulting name is longer, it truncates it to 64 characters. That way we can start domains we couldn't start before. Well, at least on systemd. To make it work all together, the machineName (which is needed only with systemd) is saved in domain's private data. That way the generation is moved to the driver and we don't need to pass various unnecessary arguments to cgroup functions. The only thing this complicates a bit is the scope generation when validating a cgroup where we must check both old and new naming, so a slight modification was needed there. Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1282846Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
由 Joao Martins 提交于
The virDomainSnapshotDefFormat calls into virDomainDefFormat, so should be providing a non-NULL virCapsPtr instance. On the qemu driver we change qemuDomainSnapshotWriteMetadata to also include caps since it calls virDomainSnapshotDefFormat. Signed-off-by: NJoao Martins <joao.m.martins@oracle.com>
-
- 03 2月, 2016 1 次提交
-
-
由 Peter Krempa 提交于
Future patches will tweak and reuse the function in different places so move it separately first.
-
- 12 1月, 2016 1 次提交
-
-
由 Michal Privoznik 提交于
While this is no functional change, whole channel definition is going to be needed very soon. Moreover, while touching this obey const correctness rule in qemuAgentOpen() - so far it was passed regular pointer to channel config even though the function is expected to not change pointee at all. Pass const pointer instead. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
- 09 1月, 2016 1 次提交
-
-
由 Jiri Denemark 提交于
The structure actually contains migration statistics rather than just the status as the name suggests. Renaming it as qemuMonitorMigrationStats removes the confusion. Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
-
- 17 12月, 2015 2 次提交
-
-
由 Andrea Bolognani 提交于
MemLock is already used in other modules and, while still an abbreviation, is not ambiguous.
-
由 Andrea Bolognani 提交于
This function detects whether a domain needs RLIMIT_MEMLOCK to be set, and if so, uses an appropriate value.
-
- 09 12月, 2015 3 次提交
-
-
由 Peter Krempa 提交于
Instead of directly accessing the array add a helper to do this.
-
由 Peter Krempa 提交于
Add qemuDomainHasVCpuPids to do the checking and replace in place checks with it. We no longer need checking whether the thread contains fake data (vcpupids[0] == vm->pid) as in b07f3d82 and 65686e5a this was removed.
-
由 Peter Krempa 提交于
As in commit 88dc7e0c, the helper can be used in cases where the function actually does not access anyting in the private data besides the agent.
-
- 26 11月, 2015 5 次提交
-
-
由 Daniel P. Berrange 提交于
Currently the QEMU monitor is given an FD to the logfile. This won't work in the future with virtlogd, so it needs to use the qemuDomainLogContextPtr instead, but it shouldn't directly access that object either. So define a callback that the monitor can use for reporting errors from the log file. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Daniel P. Berrange 提交于
The qemuDomainTaint APIs currently expect to be passed a log file descriptor. Change them to instead use a qemuDomainLogContextPtr to hide the implementation details. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Daniel P. Berrange 提交于
Convert the places which create/open log files to use the new qemuDomainLogContextPtr object instead. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Daniel P. Berrange 提交于
Introduce a qemuDomainLogContext object to encapsulate handling of I/O to/from the domain log file. This will hide details of the log file implementation from the rest of the driver, making it easier to introduce support for virtlogd later. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Daniel P. Berrange 提交于
There are two pretty similar functions qemuProcessReadLog and qemuProcessReadChildErrors. Both read from the QEMU log file and try to strip out libvirt messages. The latter then reports an error, while the former lets the callers report an error. Re-write qemuProcessReadLog so that it uses a single read into a dynamically allocated buffer. Then introduce a new qemuProcessReportLogError that calls qemuProcessReadLog and reports an error. Convert all callers to use qemuProcessReportLogError. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
- 23 11月, 2015 1 次提交
-
-
由 Guido Günther 提交于
like I440FX by moving the condition into qemuDomainMachineHasBuiltinIDE and adding more machines. Reference: http://bugs.debian.org/805189
-
- 19 11月, 2015 1 次提交
-
-
由 Jiri Denemark 提交于
We only started an async job for incoming migration from another host. When we were starting a domain from scratch or restoring from a saved state (migration from file) we didn't set any async job. Let's introduce a new QEMU_ASYNC_JOB_START for these cases. Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
-
- 18 11月, 2015 1 次提交
-
-
由 Peter Krempa 提交于
Add a function that will aggregate various checks related to memory hotplug so that they aren't scattered accross various parts of the code.
-
- 10 11月, 2015 2 次提交
-
-
由 Peter Krempa 提交于
If mlock is required either due to use of VFIO hostdevs or due to the fact that it's enabled it needs to be tweaked prior to adding new memory or after removing a module. Add a helper to determine when it's necessary and reuse it both on hotplug and hotunplug. Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1273491
-
由 Peter Krempa 提交于
New function qemuDomainGetMlockLimitBytes will now handle the calculation so that it unifies the logic to one place and allows later reuse.
-
- 22 9月, 2015 1 次提交
-
-
由 Peter Krempa 提交于
Extract the size determination into a separate function and reuse it across the memory device alignment functions. Since later we will need to decide the alignment size according to architecture let's pass def to the functions.
-