Update the VirtualBox driver to use virReportError instead of
the vboxError custom macro
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Update the XenAPI driver to use virReportError instead of
the xenapiError custom macro
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Update the QEMU driver to use virReportError instead of
the qemuReportError custom macro
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

This patch cleans up some missing "%s" before translation macros,
for strings which are const without format specifiers

Update the UML driver to use virReportError instead of the
umlReportError custom macro
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Make sure that libvirt_private.syms has all the internal symbols
from APIs in src/rpc/*.h and src/util/cgroup.h, since the LXC
controller/driver will shortly need them
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

To allow virNetServerRun/virNetServerQuit to be invoked multiple
times, we must reset the 'quit' flag in virNetServerRun
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

In the delayed close mode, we're just waiting for final data to
be written back to the client. While waiting, we should not
bother to read more data from the client.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

When sending SIGHUP to libvirtd, it will trigger the virStateDriver
reload operation. This is intended to reload the configuration files
for guests. For unknown historical reasons this is also triggering
autostart of all guests. Autostart is generally expected to be
something that happens on OS startup. Starting VMs on SIGHUP will
violate that expectation and potentially cause dangerous scenarios
if the admin has explicitly shutdown a misbehaving VM that has
been marked as autostart
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Turning on the building of driver modules in libvirt.spec.in
means that installing 'libvirt' no longer pulls in all the
drivers. For upgrade compatibility we need to list all drivers
module sub-RPMs against the 'libvirt' RPM.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Update the linux bridge driver to use virReportError instead
of the networkReportError custom macro
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Instead of only removing the ending newline character, it is
better to remove all of standard whitespace character for the
sake of log format.

One example that we have to do this is:
After three times incorrect password input, virsh command
virsh -c qemu://remoteserver/system will report error like:

: Connection reset by peerey,gssapi-keyex,gssapi-with-mic,password).

But it should be:
Permission denied (publickey,gssapi-keyex,gssapi-with-mic,password).
: Connection reset by peer

The reason is that we dropped the newline, but have a '\r' left.
The terminal interprets it as "move the cursor back to the start
of the current line", so the error string is messed up.

Noticed during the recent error cleanups.

* src/network/bridge_driver.c (networkStartRadvd): Fix spacing.
* src/openvz/openvz_conf.c (openvzReadMemConf): Likewise.
* src/qemu/qemu_command.c (qemuNetworkIfaceConnect): Likewise.
* src/qemu/qemu_hotplug.c (qemuDomainDetachNetDevice): Likewise.
* src/qemu/qemu_process.c (qemuProcessStop): Likewise.
* src/security/virt-aa-helper.c (vah_add_file): Likewise.

Detected on Cygwin.  Broken in commit 387117ad.

* src/util/virnetdev.c (virNetDevValidateConfig)
(virNetDevReplaceNetConfig): Fix prototypes.
* src/util/virnetlink.c (virNetlinkEventAddClient)
(virNetlinkEventRemoveClient): Likewise.

It was broken since forever as it expected a libxml2
XML_ELEMENT_NODE containing a XML_TEXT_NODE instead of
just a XML_TEXT_NODE.

This problem was not discovered for so long because
esxVI_String_Deserialize was not used until now.

Reported by Ata Bohra

Commit 80533ca2 forgot to think about offline cpus.  When a node
cpu is offline, then its topology/ subdirectory is not present,
leading to spurious error messages leaked to the user such as:

libvir:  error : cannot open /home/dummy/libvirt/tests/nodeinfodata/linux-nodeinfo-sysfs-test-6/node/node0/cpu7/topology/physical_package_id: No such file or directory

Fix that, as well as test it; the test data is gathered from a
machine with one NUMA node, hyperthreading, and with 2 of the
8 cpus offline.

* src/nodeinfo.c (virNodeParseNode): Don't parse topology of
offline cpus.
* tests/nodeinfotest.c (mymain): Run new test.
* tests/nodeinfodata/linux-nodeinfo-sysfs-test-6*: New data.

As confirmed with Dan on IRC.

* .mailmap: List Dan's preferred 'shortlog' name.

Also ensure that the virBuffer used to store the downloaded data
does not overflow.

Update the netcf driver to use virReportError instead of the
interfaceReportError custom macro

Update the network filter driver to use virReportError instead
of the virNWFilterReportError custom macro
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

This patch passes down the sec_mount_options to the
lxcContainerMountCGroups function and then mounts the tmpfs with
the correct label.

This patch brings support to manage sheepdog pools and volumes to libvirt.
It uses the "collie" command-line utility that comes with sheepdog for that.

A sheepdog pool in libvirt maps to a sheepdog cluster.
It needs a host and port to connect to, which in most cases
is just going to be the default of localhost on port 7000.

A sheepdog volume in libvirt maps to a sheepdog vdi.
To create one specify the pool, a name and the capacity.
Volumes can also be resized later.

In the volume XML the vdi name has to be put into the <target><path>.
To use the volume as a disk source for virtual machines specify
the vdi name as "name" attribute of the <source>.
The host and port information from the pool are specified inside the host tag.

  <disk type='network'>
    ...
    <source protocol="sheepdog" name="vdi_name">
      <host name="localhost" port="7000"/>
    </source>
  </disk>

To work right this patch parses the output of collie,
so it relies on the raw output option. There recently was a bug which caused
size information to be reported wrong. This is fixed upstream already and
will be in the next release.
Signed-off-by: NSebastian Wiedenroth <wiedi@frubar.net>

Basically within a Secure Linux Container (virt-sandbox) we want all content
that the process within the container can write to be labeled the same.  We
are labeling the physical disk correctly but when we create "RAM" based file
systems
libvirt is not labeling them, and they are defaulting to tmpfs_t, which will
will not allow the processes to write.  This patch labels the RAM based file
systems correctly.

Update the node device driver to use virReportError instead of
the virNodeDeviceReportError custom macro
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Update the secret driver to use virReportError instead of the
virSecretReportError custom macro
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Update the storage driver to use virReportError instead of
the virStorageReportError custom macro
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

When passing a const message string to the error reporting APIs
RBD forgot to use "%s" to avoid GCC format string warnings
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

This removes all the per-file error reporting macros
from the code in src/conf/
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The VIR_ERR_INVALID_ARG is typically given the function name
via __FUNCTION__
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

This rmoves all the per-file error reporting macros
from the code in src/rpc/
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

This removes nearly all the per-file error reporting macros
from the code in src/util/. A few custom macros remain for the
case, where the file needs to report errors with a variety of
different codes or parameters
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The virNetServerMDNSTimeoutNew method was casting a long long
to an int when reporting errors. This should just be using
%lld instead of %d, avoiding the need to cast
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The virnetdevtap.c and viruri.c files had two error report
messages which were not annotated with _(...)
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Nearly every source file does something like

  #define VIR_FROM_THIS VIR_FROM_FOO
  #define virFooReportErorr(code, ...) \
     virReportErrorHelper(VIR_FROM_THIS, code,  __FILE__,    \
                          __FUNCTION__, __LINE__, \
                          __VA_ARGS__)

This creates needless duplication and inconsistent error
reporting function names in each file. It is trivial to
just have virterror_internal.h provide a virReportError
macro that is equivalent

* src/util/virterror_internal.h: Define virReportError(code, ...)
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Remote driver needs to make sure the driver lock is released before
entering client IO loop as that may block indefinitely in poll(). As a
direct consequence of not following this in stream APIs, tunneled
migration to a destination host which becomes non-responding may block
qemu driver. Luckily, if keepalive is turned for p2p migrations, both
remote and qemu drivers will get automagically unblocked after keepalive
timeout.