Many places in the code call virGetLastError() just to check the
raised error code, or domain. However virGetLastError() can return
NULL, so the code has to check for that first. This patch therefore
introduces virGetLasError{Code,Domain} functions which always return a
valid error code or domain respectively, thus dropping the need to
perform any checks on the error object.
Signed-off-by: NRamy Elkest <ramyelkest@gmail.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

Signed-off-by: NRamy Elkest <ramyelkest@gmail.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

With --disable-nls is given we turn off use of gettext in the source
code, but mistakenly still installed the gmo files.
Reported-by: NOlaf Hering <olaf@aepfle.de>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

When the agent code was first introduced back in

  commit c160ce33
  Author: Daniel P. Berrange <berrange@redhat.com>
  Date:   Wed Oct 5 18:31:54 2011 +0100

    QEMU guest agent support

there was code that would loop and retry the connection when opening
the agent socket. At this time, the only thing done in between the
opening of the monitor socket & opening of the agent socket was a
call to set the monitor capabilities. This was a no-op on non-QMP
versions, so in theory there could be a race which let us connect
to the monitor while the agent socket was still not created by QEMU.

In the modern world, however, we long ago mandated the use of QMP
for managing QEMU, so we're guaranteed to have a set capabilities
QMP call. Once we've seen a reply to this, we're guaranteed that
QEMU has fully initialized all backends and is in its event loop.

We can thus be sure the QEMU agent socket is present and don't need
to retry connections to it, even without having the chardev FD passing
feature.
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

Since libvirt called bind() and listen() on the UNIX socket, it is
guaranteed that connect() will immediately succeed, if QEMU is running
normally. It will only fail if QEMU has closed the monitor socket by
mistake or if QEMU has exited, letting the kernel close it.

With this in mind we can remove the retry loop and timeout when
connecting to the QEMU monitor if we are doing FD passing. Libvirt can
go straight to sending the QMP greeting and will simply block waiting
for a reply until QEMU is ready.
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

There is a race condition when spawning QEMU where libvirt has spawned
QEMU but the monitor socket is not yet open. Libvirt has to repeatedly
try to connect() to QEMU's monitor until eventually it succeeds, or
times out. We use kill() to check if QEMU is still alive so we avoid
waiting a long time if QEMU exited, but having a timeout at all is still
unpleasant.

With QEMU 2.12 we can pass in a pre-opened FD for UNIX domain or TCP
sockets. If libvirt has called bind() and listen() on this FD, then we
have a guarantee that libvirt can immediately call connect() and
succeed without any race.

Although we only really care about this for the monitor socket and agent
socket, this patch does FD passing for all UNIX socket based character
devices since there appears to be no downside to it.

We don't do FD passing for TCP sockets, however, because it is only
possible to pass a single FD, while some hostnames may require listening
on multiple FDs to cover IPv4 and IPv6 concurrently.
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

QEMU >= 2.12 will support passing of pre-opened file descriptors for
socket based character devices.
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

The code that detaches the device from persistent definition copies the
persistent definition first so that it can easily be rolled back. The
actual detaching is then made in the copy which is assigned back on
success (if the live operation succeeded as well).

This is not the case in qemuDomainDetachDeviceAliasLiveAndConfig where
the definition was copied and put back, but the detaching happened from
the other object which was overwritten.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

Now that GnuTLS is a requirement, we can drop a lot of
conditionally built code. However, not all ifdef-s can go because
we still want libvirt_setuid to build without gnutls.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

Since GnuTLS is required there is no way to go with !WITH_GNUTLS
branch and just distribute these files.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

Now that GnuTLS is required these symbols are going to be present
all the time.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

Since GnuTLS is required there is no way to go with !WITH_GNUTLS
branch and just distribute these files.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

We are building with GnuTLS everywhere because GnuTLS is widely
available. Also, it is desirable to prefer cryptographically
strong PRNG over "/dev/urandom" which is just a fallback.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

Modify virStorageBackendLogicalLVCreate to ensure if encryption
is requested that only type LUKS is supported; otherwise, error.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

Now that virCryptoGenerateRandom() is plain wrapper over
virRandomBytes() we can drop it in favour of the latter.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

If virRandomBytes() fails there is no point calling
virRandomBits() because it uses virRandomBytes() internally
again.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Now that we have strong PRNG generator implemented in
virRandomBytes() let's use that instead of gnulib's random_r.

Problem with the latter is in way we seed it: current UNIX time
and libvirtd's PID are not that random as one might think.
Imagine two hosts booting at the same time. There's a fair chance
that those hosts spawn libvirtds at the same time and with the
same PID. This will result in both daemons generating the same
sequence of say MAC addresses [1].

1: https://www.redhat.com/archives/libvirt-users/2018-May/msg00097.htmlSigned-off-by: NMichal Privoznik <mprivozn@redhat.com>

While /dev/urandom is not terrible source of random data
gnutls_rnd is better. Prefer that one.

Also, since nearly every platform we build on already has gnutls
(if not all of them) this is going to be used by default.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Instead of having each caller report error move it into the
function. This way we can produce more accurate error messages
too.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

To unify our vir*Random() functions we need to make
virCryptoGenerateRandom NOT allocate return buffer. It should
just fill given buffer with random data.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

When generating random stream using gnults fails an error is
reported. However, the error is not helpful as it contains only
an integer error code (a negative number). Use gnutls_strerror()
to turn the error code into a string explaining what went wrong.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

This function allocates a buffer, fills it in with random bytes
and then returns it. However, the buffer is held in @buf
variable, therefore having @ret variable which does not hold
return value of the function is misleading.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>

In libvirt when a function wants to return an error code it
should be a negative value. Returning a positive value (or zero)
means success. But virRandomBytes() does not follow this rule.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>

As documented in [1], ccache needs to be installed and
configured explicitly on macOS.

[1] https://docs.travis-ci.com/user/caching/#ccache-cacheSigned-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

Now that we have separate sections for each build
configuration, there's no reason to set PATH in the global
environment.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

The files are not scripts and should not be executable.

Broken by v4.0.0-294-g5f998681.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Libvirt relies on being able to kill the destination domain and resume
the source one during migration until we called "cont" on the
destination. Unfortunately, QEMU automatically activates block devices
at the end of migration even when it's called with -S. This wasn't a big
issue in the past since the guest is not running and thus no data are
written to the block devices. However, when QEMU introduced its internal
block device locks, we can no longer resume the source domain once the
destination domain already activated the block devices (and thus
acquired all locks) unless the destination domain is killed first.

Since it's impossible to synchronize the destination and the source
libvirt daemons after a failed migration, QEMU introduced a new
migration capability called "late-block-activate" which ensures QEMU
won't activate block devices until it gets "cont". The only thing we
need to do is to enable this capability whenever QEMU supports it.

https://bugzilla.redhat.com/show_bug.cgi?id=1568407

QEMU commit implementing the capability: v2.12.0-952-g0f073f44df
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

When parsing domain XML the virCapsDomainData lookup is performed
in order to fill in missing def->os.arch and def->os.machine
strings. Well, when doing copy of already existing virDomainDef
we don't want any automagic fill in of defaults (and those two
strings are going to be provided at this point anyway by first
parse of the domain XML).

What is even worse is that we do not look up capabilities for
parsed emulator path rather some generic capabilities for parsed
arch. Therefore, if emulator points to qemu under non-default
path (say $HOME/qemu-system-arm) but there's no such qemu under
the default path (say /usr/bin/qemu-system-arm) the capabilities
lookup fails and creating the copy is denied.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

The variable forkRet is not used after commit 25f87817Signed-off-by: NRadostin Stoyanov <rstoyanov1@gmail.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>

Signed-off-by: NFilip Alac <filipalac@gmail.com>

Signed-off-by: NFilip Alac <filipalac@gmail.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Signed-off-by: NFilip Alac <filipalac@gmail.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Now that we have one place that sets up all disk-related objects to
qemuBlockStorageSourceAttachDataPtr we can easily reuse the data in the
command-line formatter by implementing a worker which will convert the
data.

A huge advantage is that it will be way easier to integrate this with
-blockdev later on.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

It prepares all disk so use the plural form.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Introduce a new setup function for all the related configuration and
move the setup and attachment of the PR code.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Create a new "Prepare" function and move the drive add code into the new
helpers. This will eventually allow to simplify and unify the attaching
code for use with blockdev at the same time as providing compatibility
with older qemus.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>