Enable retrieval of the number of maximum clients connected to all sockets
combined, as well as the number of maximum clients waiting for authentication,
in order to be successfully connected. These are the attributes configurable
through libvirtd.conf, however, it could be handy to not only know values for
these limits, but also the values for the current number of clients
connected and number of clients currently waiting for authentication which are
changing dynamically. This API does both, retrieves the limits as well as the
current dynamic values.
Signed-off-by: NErik Skultety <eskultet@redhat.com>

Add some trivial getters for client related attributes to virnetserver before
any admin method can be introduced.
Signed-off-by: NErik Skultety <eskultet@redhat.com>

QEMU needs access to the /dev/dri/render* device for
virgl to work.

Allow access to all /dev/dri/* devices for domains with
<video>
  <model type='virtio' heads='1' primary='yes'>
    <acceleration accel3d='yes'/>
  </model>
</video>

https://bugzilla.redhat.com/show_bug.cgi?id=1337290

All qemu versions we support have QEMU_CAPS_DEVICE, so checking
for it is redundant. Remove the usage.

The code diff isn't clear, but all that code is just inindented
with no other change.

Test cases that hit qemuDomainAssignAddresses but don't have
infrastructure for specifying qemuCaps values see lots of
churn, since now PCI addresses are in the XML output.

hotplug APIs with the AFFECT_CONFIG flag are essentially replicating
'insert <device> into XML document, and redefine XML'. Thinking of
it this way, it's natural that we call virDomainDefPostParse after
manually editing the XML here.

Not only does doing so allow us to drop a bunch of open coded calls
to qemuDomainAssignAddresses, but it also means we are going through
the standard channels for XML validation and potentially catching
errors in user submitted XML.

This wires up qemuDomainAssignAddresses into the new
virDomainDefAssignAddressesCallback, so it's always triggered
via virDomainDefPostParse. We are essentially doing this already
with open coded calls sprinkled about.

qemu argv parse output changes slightly since previously it wasn't
hitting qemuDomainAssignAddresses.

This will be called at the end of virDomainDefPostParse to
allow hypervisor drivers to fill in device addresses.

This reverts commit 1ccc7fbf.

We cannot check ports if autoport is set because we set ports to 0 while
parsing device XML.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1336134Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Let's use introduced domain snapshots infrastructure instead.
Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>

This solution does not keep snapshots cache because vz sdk lacks good support
for snapshot related events.

Libvirt and vz sdk has different approach to snapshot ids. vz sdk always
auto generate them while libvirt has ability to specify id by user.
Thus I have no other choice rather than simply ignore ids set by user
or generated by libvirt.
Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: NMaxim Nestratov <mnestratov@virtuozzo.com>

No longer necessary to have it, so remove it.

https://bugzilla.redhat.com/show_bug.cgi?id=1331552

Instead of disabling auto-login of all scsi targets (even those
that do not "belong" to libvirt), use iscsiadm's "--op nonpersistent"
during discovery of iSCSI targets (e.g. "iscsiadm --mode discovery
--type sendtargets") in order to avoid the node database being altered
which led to the need for the "large hammer" approach taken by
commit id '3c12b654'.

This commit removes the virISCSITargetAutologin adjustment (eg. the setting
of node.startup to "manual"). The iscsiadm command has supported this mode
of operation as of commit id 'ad873767' to open-iscsi.

Utilize the exit status parameter for virCommandRunRegex in order to
check the return error from the 'iscsiadm --mode session' command.
Without this enabled, if there are no sessions running then virCommandRun
would have displayed an error such as:

    2016-05-13 15:17:15.165+0000: 10920: error : virCommandWait:2553 :
               internal error: Child process (iscsiadm --mode session)
               unexpected exit status 21: iscsiadm: No active sessions.

It is possible that for certain paths (when probe is true) we only care
whether it's running or not to make certain decisions.  Spitting out
the error for those paths is unnecessary.

If we do have a situation where probe = false and there's an error,
then display the error from iscsiadm if it's there.

Rather than have virCommandRun just spit out the error, allow callers
to decide to pass the exitstatus so the caller can make intelligent
decisions based on the error.

For use in the test suite.

When the <gic/> element in not present in the domain XML, use the
domain capabilities to figure out what GIC version is usable and
choose that one automatically.

This allows guests to be created on hardware that only supports
GIC v3 without having to update virt-manager and similar tools.

Keep using the default GIC version if the <gic/> element has been
added to the domain XML but no version has been specified, as not
to break existing guests.

This utility function extracts some of the logic from
virQEMUCapsFillDomainFeatureGICCaps() so that it can be used
in a different context.

The INPLACE variants of the VIR_APPEND macros cannot fail and they are
inherently quiet.

It was just a useless wrapper around VIR_APPEND_ELEMENT*.

According to current xl.cfg docs and xl codes, it uses type=vif
instead of type=netfront.

Currently after domxml-to-native, libvirt xml model=netfront will be
converted to xl type=netfront. This has no problem before, xen codes
for a long time just check type=ioemu, if not, set type to _VIF.

Since libxl uses parse_nic_config to avoid duplicate codes, it
compares 'type=vif' and 'type=ioemu' for valid parameters, others
are considered as invalid, thus we have problem with type=netfront
in xl config file.
 #xl create sles12gm-hvm.orig
 Parsing config from sles12gm-hvm.orig
 Invalid parameter `type'.

Correct the conversion in libvirt, so that it matchs libxl codes
and also xl.cfg.
Signed-off-by: NChunyan Liu <cyliu@suse.com>

Unify XEN_CONFIG_FORMAT_x and LIBXL_CONFIG_FORMAT_x to
XEN_CONFIG_FORMAT_x, and move to xen_common.h.
Signed-off-by: NChunyan Liu <cyliu@suse.com>

Trivially return 1, since bhyve is considered a local connection that
should not be vulnerable to eavesdropping.

Being a local connection, bhyve does not support encryption. Therefore
trivially return 0.

This reverts commit 071fe092.
It was committed by a mistake and correct patch was committed
earlier as baad90fb.

If we exceed the timeout waiting for the tray status to change,
we don't report an error. Fix it

Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: NMaxim Nestratov <mnestratov@virtuozzo.com>

First we don't need to add disk in this case. Second flag should
be skipped.
Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>

Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>

SDK handles empty cdroms all right. We just need to
pass "" instead of NULL (not setting is good too).

However we can get problems here. Disk detaching treats source
as ids. Fortunately disk detaching is not supported for cdroms
yet and for hard disks we can not get empty source - this is prohibitited
by xml parsing code.
Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: NMaxim Nestratov <mnestratov@virtuozzo.com>

Current version of the function does not check format of cdroms at all.
At the same time prlsdkGetDiskInfo give hints that cdroms always
have format VIR_STORAGE_FILE_RAW. So fix vzCheckUnsupportedDisks.

About structure of checks. As we don't have means to store format
in SDK we always have only one format in every situation. So instead
of setting boolean let's get allowed format instead and finally compare
it to the requested. This structure of checks seems stable to me
because we have only one format in every situation.
Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>

VIR_STORAGE_FILE_AUTO can not be set from xml description.
At the same time we don't set disks format to this value
as for example qemu does. Thus this we can never get this
value in format.
Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>

Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

We support omitting listen attribute of graphics element so we should
also support omitting address attribute of listen element.  This patch
also updates libvirt to always add a listen element into domain XML
except for VNC graphics if socket attribute is specified.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Move the compatibility code out of virDomainGraphicsListensParseXML()
into virDomainGraphicsListenDefParseXML().  This also fixes a small
inconsistency between the code and error message itself.

Before this patch we would search first listen element that is
type='address' to validate listen and address attributes. After this
patch we always take the first listen element regardless of the type.

This shouldn't break anything since all drivers supports only one
listen.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

If socket attribute is present we start VNC that listens only on that
unix socket.  This makes the parser behave the same way as we actually
use the socket attribute.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Commit 82ba4110 made possible to use direct mapped iSCSI
volumes in qemu as disk sources but didn't remove the define time check.

Rework the check by simplifying the condition and allow any volumes to
be used with disk type='lun'.

The only QEMU versions that don't have such capability are <0.11,
which we no longer support anyway

The only QEMU versions that don't have such capability are <0.11,
which we no longer support anyway

The only QEMU versions that don't have such capability are <0.12,
which we no longer support anyway.

Additionally, this solves the issue of some QEMU binaries being
reported as not having such capability just because they lacked
the {kvm-}pci-assign QMP object.

Commit id 'f9edcfa4' added cookie manipulation for libxl; however, some
cookie crumb cleanup was missed. Found by Coverity.

In libxlDomainMigrationBegin, the cookie is allocated and baked; however,
the mig ingredients weren't cleaned up.

In libxlDomainMigrationPrepare, when the 'mig' cookie is added to the
args, set the 'mig = NULL'; otherwise, other failure paths between when
the code ate the cookie data and when it was added to args would fail
to clean up the crumbs.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>