This function for some weird reason returns integer instead of
virDomainNetType type. It is important to return the correct type
so that we know what values we can expect.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

There are couple of formatting issues. No functional change
though.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Due to the switch of parameters in a call to virDomainShmemDefEquals()
no device was found when looking for device with all the information
except address.  Also fix the indentation.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

If the last event callback is unregistered while the event loop is
dispatching, it is only marked as deleted, but not removed.  The number
of callbacks is more than zero in that case, so the timer is not
removed.  Because it can be removed in this function now (but also
accessed afterwards so that we set 'isDispatching = false' and have it
locked), we need to temporarily increase the reference counter of the
state for the duration of this function.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

There is a repeating pattern of code that removes the timer if it's not
needed.  So let's move it to a new function.  We'll also use it later.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

There should be one more reference because it is being kept in the list
of callbacks as an opaque.  We also unref it properly using
virObjectFreeCallback.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

This way we get reference counting and we can get rid of locking
function.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Make sure that the topology results into a sane number of cpus (up to
UINT_MAX) so that it can be sanely compared to the vcpu count of the VM.

Additionally the helper added in this patch allows to fetch the total
number the topology results to so that it does not have to be
reimplemented later.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1378290

Remove the !size check since size is initialized to NULL and thus
causing the condition to always be true

Sometimes virObjectEventStateFlush can be called without timer (if the
last event was unregistered right when the timer fired).  There is a
check for timer == -1, but that triggers warning and other log messages,
which is unnecessary.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Use much simpler logic to determine parts of the code to print.

Rather than copy-paste - use a macro

Unfortunately due to how the RNG schema was written keeping the 'value'
and 'value'_max next to each other in the XML causes a schema failure,
so the FORMAT has to write out singly rather than optimizing to write
out both values at once
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

When I added support for the pcie-expander-bus controller in commit
bc07251f, I incorrectly thought that it only had a single slot
available. Actually it has 32 slots, just like the root complex aka
pcie-root (the part that I *did* get correct is that unlike pcie-root
a pcie-expander-bus doesn't allow any integrated endpoint devices -
only pcie-root-ports and dmi-to-pci-controllers are allowed).

This breaks vCPU hotplug, because when starting a domain, we
create a copy of domain definition (which becomes live XML) and
during the post parse callbacks we might adjust some tunings so
that vCPU hotplug is possible.

This reverts commit 581b7756.

This breaks vCPU hotplug, because when starting a domain, we
create a copy of domain definition (which becomes live XML) and
during the post parse callbacks we might adjust some tunings so
that vCPU hotplug is possible.

This reverts commit c0f90799.

Certain operations may make the vcpu order information invalid. Since
the order is primarily used to ensure migration compatibility and has
basically no other user benefits, clear the order prior to certain
operations and document that it may be cleared.

All the operations that would clear the order can still be properly
executed by defining a new domain configuration rather than using the
helper APIs.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1370357

So far only guestfwd and virtio were supported. Add an additional
for Xen as libxl channels create a Xen console visible to the guest.
Signed-off-by: NJoao Martins <joao.m.martins@oracle.com>
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

When creating a copy of virDomainDef we save ourselves the
trouble of writing deep-copy functions and just format and parse
back domain/device XML. However, the XML we are parsing was
already fully formatted - there is no reason to run post parse
callbacks (which fill in blanks - there are none!).
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

This is an internal flag that prevents our two entry points to
XML parsing (virDomainDefParse and virDomainDeviceDefParse) from
running post parse callbacks. This is expected to be used in
cases when we already have full domain/device XML and we are just
parsing it back (i.e. virDomainDefCopy or virDomainDeviceDefCopy)
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Just like virDomainDefPostParseCallback has gained new
parseOpaque argument, we need to follow the logic with
virDomainDeviceDefPostParse.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

We want to pass the proper opaque pointer instead of NULL to
virDomainDefParseString.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

We want to pass the proper opaque pointer instead of NULL to
virDomainDefParse and subsequently virDomainDefParseNode too.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

We want to pass the proper opaque pointer instead of NULL to
virDomainDefParseXML and subsequently virDomainDefPostParse too.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Some callers might want to pass yet another pointer to opaque
data to post parse callbacks. The driver generic one is not
enough because two threads executing post parse callback might
want to see different data (e.g. domain object pointer that
domain def belongs to).
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Signed-off-by: NNitesh Konkar <nitkon12@linux.vnet.ibm.com>

The domain capabilities XML is capable of showing whether each guest CPU
mode is supported or not with a possibility to provide additional
details. This patch enhances host-model capability to advertise the
exact CPU model which will be used as a host-model:

    <cpu>
        ...
        <mode name='host-model' supported='yes'>
            <model fallback='allow'>Broadwell</model>
            <vendor>Intel</vendor>
            <feature policy='disable' name='aes'/>
            <feature policy='require' name='vmx'/>
        </mode>
        ...
    </cpu>
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

The function filters all CPU features through a given callback while
copying CPU model related parts of a CPU definition.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

The function moves CPU model related parts from one CPU definition to
another. It can be used to avoid unnecessary copies from a temporary CPU
definitions which will be freed anyway.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Useful for copying a CPU definition without model related parts (i.e.,
without model name, feature list, vendor).
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

In case a hypervisor is able to tell us a list of supported CPU models
and whether each CPU models can be used on the current host, we can
propagate this to domain capabilities. This is a better alternative
to calling virConnectCompareCPU for each supported CPU model.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Listing all CPU models supported by QEMU in domain capabilities makes
little sense when libvirt will refuse any model it doesn't know about.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

The patch adds <cpu> element to domain capabilities XML:

    <cpu>
        <mode name='host-passthrough' supported='yes'/>
        <mode name='host-model' supported='yes'/>
        <mode name='custom' supported='yes'>
            <model>Broadwell</model>
            <model>Broadwell-noTSX</model>
            ...
        </mode>
    </cpu>

Applications can use it to inspect what CPU configuration modes are
supported for a specific combination of domain type, emulator binary,
guest architecture and machine type.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Signed-off-by: NNitesh Konkar <nitkon12@linux.vnet.ibm.com>

Signed-off-by: NNitesh Konkar <nitkon12@linux.vnet.ibm.com>

Signed-off-by: NNitesh Konkar <nitkon12@linux.vnet.ibm.com>

Return whether the live or persistent definition was returned. Sometimes
it's necessary to base the decisions on this.

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

This way we'll be able to hotplug with both --live and --config in one
API call.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>