sdk domain handle is unique per connection so there is
no sense to query it again if we have it in vzDomObjPtr.
Side effect of prlsdkSdkDomainLookupByUUID is refreshing
domain config is of no use too as PrlVm_BeginEdit do it too.

vz supports only a subset of tcp and udp parameters.

1. tcp type supports only 'raw' protocol.
2. udp type supports only same parameters of 'host' and 'service'
for 'bind' and 'connect'.
Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>

Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>

Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>

  9c14a9ab introduced vzNewDomain function to enlist libvirt domain
object before actually creating vz sdk domain. Fix should fix
race on same vz sdk domain added event where libvirt domain object is
enlisted too. But later eb5e9c1e added locked checks for
adding livirtd domain object to list on vz sdk domain added event.
Thus now approach of 9c14a9ab is unnecessary complicated.

  See we have otherwise unuseful prlsdkGetDomainIds function only
to create minimal domain definition to create libvirt domain object.
Also vzNewDomain is difficult to use as it creates partially
constructed domain object.

  Let's move back to original approach where prlsdkLoadDomain do
all the necessary job. Another benefit is that we can now
take driver lock for bare minimum and in single place. Reducing
locking time have small disadvatage of double parsing on race
conditions which is typical if domain is added thru vz driver.
Well we have this double parse inevitably with current vz sdk api
on any domain updates so i would not take it here seriously.

  Performance events subscribtion is done before locked check and
therefore could be done twice on races but this is not the problem.
Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>

Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>

Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>

Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>

Vz containers are able to use ploop volumes from storage pools
to work upon.

To use filesystem type volume, pool name and volume name should be
specifaed in <source> :
   <filesystem type='volume' accessmode='passthrough'>
      <driver type='ploop' format='ploop'/>
      <source pool='guest_images' volume='TEST_POOL_CT'/>
      <target dir='/'/>
   </filesystem>

The information about pool and volume is stored in ct dom configuration:
<StorageURL>libvirt://localhost/pool_name/vol_name</StorageURL>
and can be easily obtained via PrlVmDevHd_GetStorageURL sdk call.

The only shorcoming: if storage pool is moved somewhere the ct
should be redefined in order to refresh the information aboot path
to root.hdd
Signed-off-by: NOlga Krishtal <okrishtal@virtuozzo.com>

We do not need to check domainf fs type there,
because it is done in prlsdkCheckUnsupportedParams.
Signed-off-by: NOlga Krishtal <okrishtal@virtuozzo.com>

Signed-off-by: NOlga Krishtal <okrishtal@virtuozzo.com>

Signed-off-by: NOlga Krishtal <okrishtal@virtuozzo.com>

Adding domain to domain list on preparation step is not correct.
First domain is not fully constructed - domain definition is
missing. Second we can't use VIR_MIGRATE_PARAM_DEST_XML parameter
to parse definition as vz sdk can patch it by itself. Let's add/remove
domain on finish step. This is for synchronization purpose only so domain
is present/absent on destination after migration completion. Actually
domain object will probably be created right after actual vz sdk
migration start by vz sdk domain defined event.

We can not and should not sync domain cache on error path in finish step
of migration. We can not as we really don't know what is the reason of
cancelling and we should not as user should not make assumptions on
state on error path. What we should do is cleaning up temporary migration
state that is induced on prepare step but we don't have one. Thus
cancellation should be noop.
Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: NMaxim Nestratov <mnestratov@virtuozzo.com>

Free sdkdom on any result of prlsdkNewDomainByHandle.
Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>

libvirt domain defined event is issued only on correspondent vz sdk
event. But in case event delivered before domain is added to
domain list we can mistakenly skip this event if prlsdkNewDomainByHandle
return NULL in case of domain is discovered in the list under
the driver lock. Let's return domain object in this case.
Now prlsdkNewDomainByHandle returns NULL only in case of
error which is more convinient.
Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>

Allow to store driver specific data on a per-vcpu basis.

Move of the virDomainDef*Vcpus* functions was necessary as
virDomainXMLOptionPtr was declared below this block and I didn't want to
split the function headers.

Patch fixes vz build after changes in IP-related netdev functions(cf0568b0, fbc1843d).
Signed-off-by: NOlga Krishtal <okrishtal@virtuozzo.com>

All the same information was already there, just in slightly different
places in the virDomainNetDef.

We need this because apply graphics functions is used on
update too. Also in case of NULL address resolve it to default
instead of error.
Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>

Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>

Allocation will do this job. Also we don't use the explicit setting
in other places.
Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>

Move graphic device config to post parse. This way we
detect error on early stage and leverage checking on detach too.
Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>

Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>

First we need to always set value to vz sdk parameter so
we can leverage setting code for device updates. This patch
resolves tristate default to off implicitly. This is easier
then extract default value from vz sdk itself. First current
default is off too, second this approach is already taken
for 'net->linkstate'.

Second dump this option in domain xml.
Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>

Fix net->data usage accordingly to type field.
Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>

Current code that pass gateways to vz sdk is not suitable for
updates. If update has no gateways while we had them before
we need to pass "" for vz sdk gateways to reset old value.

The code definitely deserves its own function.

Drop checks that skip setting gateways if network address
is not set. Such a configuration is possible in vz sdk.
Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>

Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>

Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>

Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>

And reformat so that we don't have lengthy lines. Also simplify
some checks.
Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>

Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: NMaxim Nestratov <mnestratov@virtuozzo.com>

Attach/detach functions for disk/net are quite trivial and
typically call a few functions in begin/end edit frame. Having
in mind update function too adding configuring for another
device (like graphics) will introduce 3 trivial functions more.
Let's replace current approach by attach/detach functions for
device.
Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: NMaxim Nestratov <mnestratov@virtuozzo.com>

Current implementation works with hard disks only. This patch
adds support for any disk device (cdroms and hdds right now).
Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: NMaxim Nestratov <mnestratov@virtuozzo.com>

This code was added as a part of huge patch that moves driver
from working with prlctl to vz sdk so there is no good explanation
why this is done this way. The problem that it is not correct.
vz sdk cache mode parameter affects all domain disks while this hunk
resets its on every disk to a new value.
Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>

Most the callers pass 0 in one form or another, including
vircapstest which used VIR_ARCH_NONE.

Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>