It turns out that the cpuacct results properly account for offline
cpus, and always returns results for every possible cpu, not just
the online ones.  So there is no need to check the map of online
cpus in the first place, merely only a need to know the maximum
possible cpu.  Meanwhile, virNodeGetCPUBitmap had a subtle change
from returning the maximum id to instead returning the width of
the bitmap (one larger than the maximum id) in commit 2f4c5338,
which made this code encounter some off-by-one logic leading to
bad error messages when a cpu was offline:

$ virsh cpu-stats dom
error: Failed to virDomainGetCPUStats()

error: An error occurred, but the cause is unknown

Cleaning this up unraveled a chain of other unused variables.

* src/qemu/qemu_driver.c (qemuDomainGetPercpuStats): Drop
pointless check for cpumap changes, and use correct number of
cpus.  Simplify signature.
(qemuDomainGetCPUStats): Adjust caller.
* src/nodeinfo.h (nodeGetCPUCount): New prototype.
(nodeGetCPUBitmap): Drop unused parameter.
* src/nodeinfo.c (nodeGetCPUBitmap): Likewise.
(nodeGetCPUMap): Adjust caller.
(nodeGetCPUCount): New function.
* src/libvirt_private.syms (nodeinfo.h): Export it.

Commit 246143b6 fixed a warning on older gcc, but caused a warning
on newer gcc.

../../src/rpc/virnetserverservice.c: In function 'virNetServerServiceNewPostExecRestart':
../../src/rpc/virnetserverservice.c:277:41: error: pointer targets in passing argument 3 of 'virJSONValueObjectGetNumberUint' differ in signedness [-Werror=pointer-sign]

* src/rpc/virnetserverservice.c: Use correct types.

With older gcc and 64-bit size_t, the compiler issues a real warning:
rpc/virnetserverservice.c:277: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing]

Introduced in commit 0cc79255.  Depending on machine endianness,
this warning represents a real bug that could mis-interpret the
value by a factor of 2^32.  I don't know why I couldn't get newer
gcc to report the same warning message.

* src/rpc/virnetserverservice.c
(virNetServerServiceNewPostExecRestart): Use temporary instead.

Found this when building on RHEL5:

parallels/parallels_storage.c: In function 'parallelsStorageOpen':
parallels/parallels_storage.c:180: error: 'for' loop initial declaration used outside C99 mode

(and similar error in parallels_driver.c). This was in spite of
configuring with "-Wno-error".

This commit changes the behavior of LIBVIRT_DEBUG=1 libvirtd:

$ git show 7022b091
commit 7022b091
Author: Daniel P. Berrange <berrange@redhat.com>
Date:   Thu Sep 27 13:13:09 2012 +0100

    Automatically enable systemd journal logging

    Probe to see if the systemd journal is accessible, and if
    so enable logging to the journal by default, rather than
    stderr (current default under systemd).

Previously  'LIBVIRT_DEBUG=1 /usr/sbin/libvirtd' would show all debug
output to stderr, now it send debug output to the journal.

Only use the journal by default if running in daemon mode, or
if stdin is _not_ a tty. This should make libvirtd launched from
systemd use the journal, but preserve the old behavior in most
situations.

This was found during testing of the fix for:

   https://bugzilla.redhat.com/show_bug.cgi?id=868483

networkValidate was supposed to check for the existence of multiple
portgroups and report an error if this was encountered. It did, but
there were two problems:

1) even though it logged an error, it still returned success, allowing
the operation to continue.

2) It could exit the portgroup checking loop early (or possibly not
even do it once) if a vlan tag was supplied in the base network config
or one of the portgroups.

This patch fixes networkValidate to return failure in addition to
logging the error, and also changes it to not exit the portgroup
checking loop early. The logic was a bit off in the checking for vlan
anyway, and it's intertwined with fixing the early loop exit, so I
fixed that as well. Now it correctly checks for combinations where a
<virtualport> is specified in the base network def and <vlan> is given
in a portgroup, as well as the opposite (<vlan> in base network def
and <virtualport> in portgroup), and ignores the case of a disallowed
vlan when using *no* portgroup if there is a default portgroup (since
in that case there is no way to not use any portgroup).

Driver support added for:
- test: pretending 8 host CPUS, 3 being online
- qemu, lxc, openvz, uml: using nodeGetCPUMap
Signed-off-by: NViktor Mihajlovski <mihajlov@linux.vnet.ibm.com>

Added an implemention of virNodeGetCPUMap to nodeinfo.c,
(nodeGetCPUMap) which can be used by all drivers for a Linux
hypervisor host.
Signed-off-by: NViktor Mihajlovski <mihajlov@linux.vnet.ibm.com>

Callers should not need to know what the name of the file to
be read in the Linux-specific version of nodeGetCPUmap;
furthermore, qemu cares about online cpus, not present cpus,
when determining which cpus to skip.

While at it, I fixed the fact that we were computing the maximum
online cpu id by doing a slow iteration, when what we really want
to know is the max available cpu.

* src/nodeinfo.h (nodeGetCPUmap): Rename...
(nodeGetCPUBitmap): ...and simplify signature.
* src/nodeinfo.c (linuxParseCPUmax): New function.
(linuxParseCPUmap): Simplify and alter signature.
(nodeGetCPUBitmap): Change implementation.
* src/libvirt_private.syms (nodeinfo.h): Reflect rename.
* src/qemu/qemu_driver.c (qemuDomainGetPercpuStats): Update
caller.

Sometimes it's handy to know how many bits are set.

* src/util/bitmap.h (virBitmapCountBits): New prototype.
(virBitmapNextSetBit): Use correct type.
* src/util/bitmap.c (virBitmapNextSetBit): Likewise.
(virBitmapSetAll): Maintain invariant of clear tail bits.
(virBitmapCountBits): New function.
* src/libvirt_private.syms (bitmap.h): Export it.
* tests/virbitmaptest.c (test2): Test it.

Recent storage patches changed signature of virStorageFileGetMetadata
and replaced chain with backingChain in virDomainDiskDef.

Also remove warnings for upcoming versions. There hadn't been any
compatibility problems with new ESX version over the whole lifetime
of the ESX driver, so I don't expect any in the future.

Update documentation to mention vSphere 5.x support.

Qemu has added some new feature flags. This patch adds them to libvirt.

The new features are for the cpuid function 0x7 that takes an argument
in the ecx register. Currently only 0x0 is used as the argument so I was
lazy and I just clear the registers to 0 before calling cpuid. In future
when there maybe will be some other possible arguments, we will need to
improve the cpu detection code to take this into account.

On one hand, numad probably will manage the affinity of domain process
dynamically in future. On the other hand, even numad won't manage it,
it still could confusion. Let's make things simpler enough to avoid
the lair for now.

When the cpu placement model is "auto", it sets the affinity for
domain process with the advisory nodeset from numad, however,
creating cgroup for the domain process (called emulator thread
in some contexts) later overrides that with pinning it to all
available pCPUs.

How to reproduce:

  * Configure the domain with "auto" placement for <vcpu>, e.g.
    <vcpu placement='auto'>4</vcpu>
  * % virsh start dom
  * % cat /proc/$dompid/status

Though the emulator cgroup cause conflicts, but we can't simply
prohibit creating it, as other tunables are still useful, such
as "emulator_period", which is used by API
virDomainSetSchedulerParameter. So this patch doesn't prohibit
creating the emulator cgroup, but inherit the nodeset from numad,
and reset the affinity for domain process.

* src/qemu/qemu_cgroup.h: Modify definition of qemuSetupCgroupForEmulator
                          to accept the passed nodenet
* src/qemu/qemu_cgroup.c: Set the affinity with the passed nodeset

Abstract the codes to prepare cpumap into a helper a function,
which can be used later.

* src/qemu/qemu_process.h: Declare qemuPrepareCpumap
* src/qemu/qemu_process.c: Implement qemuPrepareCpumap, and use it.

- Defined the wire protocol format for virNodeGetCPUMap and its
  arguments
- Implemented remote method invocation (remoteNodeGetCPUMap)
- Implemented method dispatcher (remoteDispatchNodeGetCPUMap)
Signed-off-by: NViktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Signed-off-by: NEric Blake <eblake@redhat.com>

Adding a new API to obtain information about the
host node's present, online and offline CPUs.

int virNodeGetCPUMap(virConnectPtr conn,
                     unsigned char **cpumap,
                     unsigned int *online,
                     unsigned int flags);

The function will return the number of CPUs present on the host
or -1 on failure;
If cpumap is non-NULL virNodeGetCPUMap will allocate an array
containing a bit map representation of the online CPUs. It's
the callers responsibility to deallocate cpumap using free().
If online is non-NULL, the variable pointed to will contain
the number of online host node CPUs.
The variable flags has been added to support future extensions
and must be set to 0.

Extend the driver structure by nodeGetCPUMap entry in support of the
new API virNodeGetCPUMap.
Added implementation of virNodeGetCPUMap to libvirt.c
Signed-off-by: NViktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Signed-off-by: NEric Blake <eblake@redhat.com>

Transport Open vSwitch per-port data during live
migration by using the utility functions
virNetDevOpenvswitchGetMigrateData() and
virNetDevOpenvswitchSetMigrateData().
Signed-off-by: NKyle Mestery <kmestery@cisco.com>

Add utility functions for Open vSwitch to both save
per-port data before a live migration, and restore the
per-port data after a live migration.
Signed-off-by: NKyle Mestery <kmestery@cisco.com>

Add the ability for the Qemu V3 migration protocol to
include transporting network configuration. A generic
framework is proposed with this patch to allow for the
transfer of opaque data.
Signed-off-by: NKyle Mestery <kmestery@cisco.com>
Signed-off-by: NLaine Stump <laine@laine.org>

In commit 371ddc98, I mistakenly added the check for sysctl
version 9 after setting the hypercall version to 1, which will
fail with

error : xenHypervisorDoV1Op:967 : Unable to issue hypervisor
ioctl 3166208: Function not implemented

This check should be included along with the others that use
hypercall version 2.

When restoring selinux labels after a VM is stopped, any non-standard
path that doesn't have a default selinux label causes the process
to stop and exit early. This isn't really an error condition IMO.

Of course the selinux API could be erroring for some other reason
but hopefully that's rare enough to not need explicit handling.

Common example here is storing disk images in a non-standard location
like under /mnt.

Reported by Michal Privoznik.

* src/security/security_dac.c (virSecurityDACGenLabel): Use
correct format.

We put a comment containing "virsh edit <domain_name>" at the start of
the XML. W3C recommendation forbids the use of "--" in comments [1] and
libvirt can't parse it either. This patch omits the domain name if it
contains a double hyphen.

[1] http://www.w3.org/TR/REC-xml/#sec-comments

Rename the 'wait' parameter to 'loop'.
This silences the warning:
storage/storage_backend.c:1348:34: error: declaration of 'wait' shadows
a global declaration [-Werror=shadow]
and fixes the build with -Werror.
--
Note: loop is pool backwards.

The snapshot code when reusing an existing file had hard-to-read
logic, as well as a missing sanity check: REUSE_EXT should require
the destination to already be present.

* src/qemu/qemu_driver.c (qemuDomainSnapshotDiskPrepare): Require
destination on REUSE_EXT, rename variable for legibility.

Fixes a build failure on cygwin:
cc1: warnings being treated as errors
security/security_dac.c: In function 'virSecurityDACSetProcessLabel':
security/security_dac.c:862:5: error: format '%u' expects type 'unsigned int', but argument 7 has type 'uid_t' [-Wformat]
security/security_dac.c:862:5: error: format '%u' expects type 'unsigned int', but argument 8 has type 'gid_t' [-Wformat]

* src/security/security_dac.c (virSecurityDACSetProcessLabel)
(virSecurityDACGenLabel): Use proper casts.

virStorageVolLookupByPath is an API call that virt-manager uses
quite a bit when dealing with storage. This call use BackendStablePath
which has several usleep() heuristics that can be tripped up
and hang virt-manager for a while.

Current example: an empty mpath pool pointing to /dev/mapper makes
_any_ calls to virStorageVolLookupByPath take 5 seconds.

The sleep heuristics are actually only needed in certain cases
when we are waiting for new storage to appear, so let's skip the
timeout steps when calling from LookupByPath.

Since the option doesn't exist. Fixes booting with
cpu mode='host-model' and qemu 1.2.0

Currently it's assumed that qemu always supports VNC, however it is
definitely possible to compile qemu without VNC support so we should at
the very least check for it and handle that correctly.

Yet another instance of where using plain open() mishandles files
that live on root-squash NFS, and where improving the API can
improve the chance of a successful probe.

* src/util/storage_file.h (virStorageFileProbeFormat): Alter
signature.
* src/util/storage_file.c (virStorageFileProbeFormat): Use better
method for opening file.
* src/qemu/qemu_driver.c (qemuDomainGetBlockInfo): Update caller.
* src/storage/storage_backend_fs.c (virStorageBackendProbeTarget):
Likewise.

In v2 migration protocol, XML is obtained by calling domainGetXMLDesc.
This includes the default USB controller in XML, which breaks migration
to older libvirt (before 0.9.2).

Commit 409b5f54
    qemu: Emit compatible XML when migrating a domain
only fixed this for v3 migration.

This patch uses the new VIR_DOMAIN_XML_MIGRATABLE flag (detected by
VIR_DRV_FEATURE_XML_MIGRATABLE) to obtain XML without the default controller,
enabling backward v2 migration.

As we switched to setting capabilities based on QMP communication,
qemu seamless-migration capability was not set. In the -help output
this knob is called seamless-migration=[on|off]. The equivalent in
QMP world is SPICE_MIGRATE_COMPLETED event (qemu upstream commit
2fdd16e2).

"nodeinfo" is not used in these two functions, and it's waste
of goto in qemuProcessSetEmulatorAffinites

This resolves: https://bugzilla.redhat.com/show_bug.cgi?id=868483

virNetworkUpdate, virNetworkDefine, and virNetworkCreate all three
allow network definitions to contain multiple <portgroup> elements
with default='yes'. Only a single default portgroup should be allowed
for each network.

This patch updates networkValidate() (called by both
virNetworkCreate() and virNetworkDefine()) and
virNetworkDefUpdatePortGroup (called by virNetworkUpdate() to not
allow multiple default portgroups.

This fixes the problem reported in:

  https://bugzilla.redhat.com/show_bug.cgi?id=868389

Previously, the dnsmasq hosts file (used for static dhcp entries, and
addnhosts file (used for additional dns host entries) were only
created/referenced on the dnsmasq commandline if there was something
to put in them at the time the network was started. Once we can update
a network definition while it's active (which is now possible with
virNetworkUpdate), this is no longer a valid strategy - if there were
0 dhcp static hosts (resulting in no reference to the hosts file on the
commandline), then one was later added, the commandline wouldn't have
linked dnsmasq up to the file, so even though we create it, dnsmasq
doesn't pay any attention.

The solution is to just always create these files and reference them
on the dnsmasq commandline (almost always, anyway). That way dnsmasq
can notice when a new entry is added at runtime (a SIGHUP is sent to
dnsmasq by virNetworkUdpate whenever a host entry is added or removed)

The exception to this is that the dhcp static hosts file isn't created
if there are no lease ranges *and* no static hosts. This is because in
this case dnsmasq won't be setup to listen for dhcp requests anyway -
in that case, if the count of dhcp hosts goes from 0 to 1, dnsmasq
will need to be restarted anyway (to get it listening on the dhcp
port). Likewise, if the dhcp hosts count goes from 1 to 0 (and there
are no dhcp ranges) we need to restart dnsmasq so that it will stop
listening on port 67. These special situations are handled in the
bridge driver's networkUpdate() by checking for ((bool)
nranges||nhosts) both before and after the update, and triggering a
dnsmasq restart if the before and after don't match.