- 06 11月, 2009 5 次提交
-
-
由 Cole Robinson 提交于
This matches the expected behavior of state drivers such as QEMU.
-
由 Cole Robinson 提交于
Performs changes needed when stopping a VM (which are currently duplicated in several places, and forgotten in others).
-
由 Paolo Bonzini 提交于
* src/qemu/qemu_driver.c: in qemudDomainMigratePerform call doPeer2PeerMigrate for VIR_MIGRATE_PEER2PEER.
-
由 Matthew Booth 提交于
* src/util/network.c: Add htons and ntohs in virSocket(Get|Set)Port
-
由 Eduardo Otubo 提交于
* src/phyp/phyp_driver.[ch]: add new entry points and a number of cleanups
-
- 05 11月, 2009 10 次提交
-
-
由 Matthew Booth 提交于
* include/libvirt/virterror.h src/util/virterror.c: add a new error VIR_ERR_CONFIG_UNSUPPORTED for valid but unsupported configuration options * src/conf/domain_conf.c: Throw an error if guestfwd address isn't IPv4 and cleanup a number of parsing return error values.
-
由 Daniel Veillard 提交于
-
由 Matthew Booth 提交于
allows the following to be specified in a domain: <channel type='pipe'> <source path='/tmp/guestfwd'/> <target type='guestfwd' address='10.0.2.1' port='4600'/> </channel> * proxy/Makefile.am: add network.c as dep of domain_conf.c * docs/schemas/domain.rng src/conf/domain_conf.[ch]: extend the domain schemas and the parsing/serialization side for the new construct QEmu support will add the following on the qemu command line: -chardev pipe,id=channel0,path=/tmp/guestfwd -net user,guestfwd=tcp:10.0.2.1:4600-chardev:channel0 * src/qemu/qemu_conf.c: Add argument output for channel * tests/qemuxml2(argv|xml)test.c: Add test for <channel> domain syntax
-
由 Matthew Booth 提交于
* src/qemu/qemu_conf.h: defines a new QEMUD_CMD_FLAG_CHARDEV flag * src/qemu/qemu_conf.c: parse the output for -chardev and set flag appropriately
-
由 Matthew Booth 提交于
A character device's target (it's interface in the guest) had only a single property: port. This patch is in preparation for adding targets which require other properties. Since this changes the conf type for character devices this affects a number of drivers: * src/conf/domain_conf.[ch] src/esx/esx_vmx.c src/qemu/qemu_conf.c src/qemu/qemu_driver.c src/uml/uml_conf.c src/uml/uml_driver.c src/vbox/vbox_tmpl.c src/xen/xend_internal.c src/xen/xm_internal.c: target properties are moved into a union in virDomainChrDef, and a targetType field is added to identify which union member should be used. All current code which touches a virDomainChrDef is updated both to use the new union field, and to populate targetType if necessary.
-
由 Ryota Ozaki 提交于
Current implementation of lxc driver creates vethN named interface(s) in the host and passes as it is to a container. The reason why it doesn't use ethN is due to the limitation that one namespace cannot have multiple iterfaces that have an identical name so that we give up creating ethN named interface in the host for the container. However, we should be able to allow the container to have ethN by changing the name after clone(CLONE_NEWNET). * src/lxc/lxc_container.c src/lxc/veth.c src/lxc/veth.h: do the clone and then renames interfaces eth0 ... ethN to keep the interface names familiar in the domain
-
由 Ryota Ozaki 提交于
* src/lxc/lxc_driver.c: refactor lxcDomainSetAutostart() to avoid deep indentation of the code
-
由 Ryota Ozaki 提交于
* src/lxc/lxc_container.c src/lxc/lxc_controller.c src/lxc/lxc_driver.c src/lxc/veth.c: most of cleanups are just capitalizing their messages though, some fixes wrong error messages and awkward indentations, and improves error messages.
-
由 Ryota Ozaki 提交于
* src/lxc/lxc_container.c src/lxc/lxc_controller.c src/lxc/lxc_driver.c src/lxc/veth.c: fix broken function comments
-
由 Cole Robinson 提交于
-
- 04 11月, 2009 20 次提交
-
-
由 Gerhard Stenzel 提交于
* src/qemu/qemu.conf src/qemu/qemu_conf.c src/qemu/qemu_conf.h: there is a new config type option for mac filtering * src/qemu/qemu_bridge_filter.[ch]: new module for the ebtable entry points * src/qemu/qemu_driver.c: plug the MAC filtering at the right places in the domain life cycle * src/Makefile.am po/POTFILES.in: add the new module
-
由 Gerhard Stenzel 提交于
* configure.in: look for ebtables binary location if present * src/Makefile.am: add the new module * src/util/ebtables.[ch]: new module and internal APIs around the ebtables binary * src/libvirt_private.syms: export the symbols only internally
-
由 Cole Robinson 提交于
-
由 Cole Robinson 提交于
-
由 Cole Robinson 提交于
-
由 Cole Robinson 提交于
-
由 Cole Robinson 提交于
This should be a no op for now, but we will use this function to set up transient state in the future.
-
由 Cole Robinson 提交于
- Implement DomainGetMaxVCPUs - Use GetMaxVCPUs to validate requested CPU amount - Deny the 'hotplug' for a running domain.
-
由 Cole Robinson 提交于
Pretty sure this would deadlock now that we have proper locking, so remove the code.
-
由 Cole Robinson 提交于
-
由 Cole Robinson 提交于
- Don't duplicate SystemError - Use proper error code in domain_conf - Fix a broken error call in qemu_conf - Don't use VIR_ERR_ERROR in security driver (isn't a valid code in this case)
-
由 Cole Robinson 提交于
All drivers have copy + pasted inadequate error reporting which wraps util.c:virGetHostname. Move all error reporting to this function, and improve what we report. Changes from v1: Drop the driver wrappers around virGetHostname. This means we still need to keep the new conn argument to virGetHostname, but I think it's worth it.
-
由 Laine Stump 提交于
* src/conf/interface_conf.c: the code was erronously returning -1 in the two functions if <dhcp> is not provided
-
由 Laine Stump 提交于
* src/conf/interface_conf.c: lack of one of these in the live xml output was causing the parse in virInterfaceDefParseBond() to fail
-
由 Laine Stump 提交于
* src/conf/interface_conf.c: forgot to free the structure itself
-
由 Laine Stump 提交于
This patch updates the xml parsing and formatting, and the associated virInterfaceDef data structure to support IPv6, along the way adding support for multiple protocols per interface, and multiple IP addresses per protocol. * src/conf/interface_conf.[ch]: update the structures, code for parsing and serialization
-
由 Laine Stump 提交于
This patch adds the flag VIR_INTERFACE_XML_INACTIVE to virInterfaceGetXMLDesc's flags. When it is*not* set (the default), the live interface info will be returned in the XML (in particular, the IP address(es) and netmask(s) will be retrieved by querying the interface directly, rather than reporting what's in the config file). The backend of this is in netcf's ncf_if_xml_state() function. * configure.in libvirt.spec.in: requires netcf >= 0.1.3 * include/libvirt/libvirt.h.in: adds flag VIR_INTERFACE_XML_INACTIVE * src/conf/interface_conf.c src/interface/netcf_driver.c src/libvirt.c: update the parsing and backend routines accordingly * tools/virsh.c: change interface edit to inactive definition and adds the inactive flag for interface dump
-
由 Laine Stump 提交于
The minimal XML returned from ncf_if_xml_state() doesn't contain this attribute (which makes no sense in the case of reporting current status of the interface), and it was preventing it from passing through the parse/format step. * src/conf/interface_conf.[ch]: add a new virInterfaceStartMode value and modify loading/saving accordingly
-
由 Daniel P. Berrange 提交于
The virStateInitialize() call for starting up stateful drivers may require that the event loop is running already. This it is neccessary to start the event loop before this call. At the same time, network clients must not be processed until afte virStateInitialize has completed. The qemudListenUnix() and remoteListenTCP() methods must therefore not register file handle watches, merely open the network sockets & listen() on them. This means clients can connected and are queued, pending completion of initialization The qemudRunLoop() method is moved into a background thread that is started early to allow access to the event loop during driver initialization. The main process thread leader pretty much does nothing once the daemon is running, merely waits for the event loop thread to quit * daemon/libvirtd.c, daemon/libvirtd.h: Move event loop into a background thread * daemon/THREADING.txt: Rewrite docs to better reflect reality
-
由 Dan Kenigsberg 提交于
suggested by danpb on irc, patch by danken fixed for proper C syntax * python/libvirt-override.c: on event callback release the python interpreter lock and take it again when coming back so that the callback can reinvoke libvirt.
-
- 03 11月, 2009 5 次提交
-
-
由 Laine Stump 提交于
There are places where an interface will not have a mac address, and netcf returns this as a NULL pointer rather than a pointer to an empty string. Rather than checking for this all over the place in libvirt, just save it in the virInterface object as an empty string. * src/datatypes.c: allow NULL mac in virGetInterface()
-
由 Daniel Veillard 提交于
introduced on commit 9231aa7d * src/qemu/qemu_driver.c: in qemudRemoveDomainStatus fix a reference to an undefined variable buf and free up an allocated string
-
由 Chris Lalancette 提交于
When building with --disable-nls, I got a few messages like this: storage/storage_backend.c: In function 'virStorageBackendCreateQemuImg': storage/storage_backend.c:571: warning: format not a string literal and no format arguments Fix these up. Signed-off-by: NChris Lalancette <clalance@redhat.com>
-
由 Chris Lalancette 提交于
qemudShutdownVMDaemon() calls qemudRemoveDomainStatus(), which then calls virFileDeletePID(). qemudShutdownVMDaemon() then unnecessarily calls virFileDeletePID() again. Remove this second usage of it, and also slightly refactor qemudRemoveDomainStatus() to VIR_WARN appropriate error messages. Signed-off-by: NChris Lalancette <clalance@redhat.com>
-
由 Daniel P. Berrange 提交于
The LXC driver was mistakenly returning -1 for lxcStartup() in scenarios that are not an error. This caused the libvirtd to quit for unprivileged users. This fixes the return code of LXC driver, and also adds a "name" field to the virStateDriver struct and logging to make it easier to find these problems in the future * src/driver.h: Add a 'name' field to state driver to allow easy identification during failures * src/libvirt.c: Log name of failed driver for virStateInit failures * src/lxc/lxc_driver.c: Don't return a failure code for lxcStartup() if LXC is not available on this host, simply disable the driver. * src/network/bridge_driver.c, src/node_device/node_device_devkit.c, src/node_device/node_device_hal.c, src/opennebula/one_driver.c, src/qemu/qemu_driver.c, src/remote/remote_driver.c, src/secret/secret_driver.c, src/storage/storage_driver.c, src/uml/uml_driver.c, src/xen/xen_driver.c: Fill in name field in virStateDriver struct
-