In each of these cases, Coverity complains that the result count returned
on error paths would be -1 disregarding that the count and the corresponding
are "linked" together (it doesn't know that).  Simple enough to check and
remove the warning

Add "domstats" command that excercises both of the new APIs depending if
you specify a domain list or not. The output is printed as a key=value
list of the returned parameters.

In function virQEMUCapsParseMachineTypesStr, VIR_STRNDUP allocates
memory for 'name' in {do,while} loop. If 'name' isn't freed before
'continue', its memory will be allocated again in the next loop.
In this case the memory allocated for 'name' in privious loop is
useless and not freed. Free it before continue this loop to fix that.
Signed-off-by: NWang Rui <moon.wangrui@huawei.com>

The 'lib' handle will be leaked if 'dlsym' condition fails.
So close the handle before return.
Signed-off-by: NWang Rui <moon.wangrui@huawei.com>

Coverity determined that 'conflict' would be leaked.
Signed-off-by: NWang Rui <moon.wangrui@huawei.com>

Implement the remote driver support for shuffling the domain stats
around.

Add domain list filtering functions and a flag to enforce checking
whether the remote daemon supports the requested stats groups.

Add helper to free a list of virDomainPtrs without raising or clearing
errors. Use it in one place and prepare it for reuse.

resolves https://bugzilla.redhat.com/show_bug.cgi?id=1132305:

The error message for an out-of-range argument was confusing:

virsh -k 9999999999
error: option --k requires a positive numeric argument

After this patch, it is:

error: Invalid value for option -k
Signed-off-by: NEric Blake <eblake@redhat.com>

Adjust the initialization of qemuCaps() to check for a NULL before
attempting to dereference like other callers/users do.

The call to virDomainSnapshotRedefinePrep() had a spurrious ! in front of
it which caused Coverity to complan that the expression is always false.

Coverity complains that checking for domain->def being non NULL in the
if (live) path of virDomainObjAssignDef() would be unnecessary or a
NULL deref since the call to virDomainObjIsActive() would already
dereference domain->def when checking if the def->id field was != -1.

Checked all callers to virDomainObjAssignDef() and each at some point
dereferences (vm)->def->{field} prior to calling when live is true.

In qemuNetworkIfaceConnect() a call to virNetDevBandwidthSet() is
made where the function prototype requires the first parameter
(net->ifname) to be non NULL.  Coverity complains that the subsequent
non NULL check for net->ifname prior to the next call gets flagged as
an unnecessary check.  Resolve by removing the extra check

In virDomainActualNetDefFormat() a call to virDomainNetGetActualType(def)
was made before a check for (!def) a few lines later. This triggered
Coverity to note the possible NULL deref.  Just moving the initialization
to after the !def checks resolves the issue

There were two occurrances of attempting to initialize actualType by
calling virStorageSourceGetActualType(src) prior to a check if (!src)
resulting in Coverity complaining about the possible NULL dereference
in virStorageSourceGetActualType() of src.

Resolve by moving the actualType setting until after checking !src

If virDomainDiskDefFree(disk) is called in 'skipdisk:', then it's possible
to either return to skipdisk without reallocating a new disk (via the if
condition just prior) or to end the loop having deleted the disk. Since
virDomainDiskDefFree() does not pass by reference, disk isn't changed in
this context, thus the possible issue.

There were two warnings in this module

  If the VIR_ALLOC_N(def->serials, 1) fails, then a virDomainChrDefFree(chr)
  is called and we jump to cleanup which makes the same call. Just remove
  the one after VIR_ALLOC_N()

  In the label "skipnic:" a virDomainNetDefFree(net) is made; however, if
  in going back to the top of the loop we jump back down to skipnic for any
  reason, the call will attempt to free an already freed structure since
  "net" was not passed by reference to virDomainNetDefFree().  Just set
  net = NULL in skipnic: to resolve the issue.

Coverity complains that calling virNetworkDefFree(def), then jumping
to the cleanup: label which calls virNetworkDefFree(def) could result
in a double_free.  Just remove the call from the if statement.

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Since times when vbox moved to the daemon (due to some licensing
issue) the subdrivers that vbox implements were registered, but not
opened since our generic subdrivers took priority. I've tried to fix
this in 65b7d553 but it was not correct. Apparently moving
vbox driver registration upfront changes the default connection URI
which makes some users sad. So, this commit breaks vbox into pieces
and register vbox's network and storage drivers first, and vbox driver
then at the end. This way, the vbox driver is registered in the order
it always was, but its subdrivers are registered prior the generic
ones.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

There's this unwritten rule in libvirt that vir_function is translated
into virFunction when needed (e.g. in remote protocol definition,
python, ...). Up till now we ignored such translation in driver module
loading and did fine. Well, we didn't have any module with an
underscore in its name. But this will change in next commit. The
problem is, once an a module is dlopen()-ed, we derive register
function name from its name. So instead of "driver_subdriverRegister"
do some magic to turn that into "driverSubdriverRegister".
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Even though we kept adding new and new modules (e.g. vbox or bhyve)
the test wasn't updated. Do that now. Moreover, while it's not
crucial, it's nice to reorder test cases to match the order in which
the daemon loads the modules.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

While working on virDomainBlockCopy, I noticed we had a verify()
concerning internal XML flags that was incomplete after several
recent flag additions; move that up higher in the code to make it
harder to forget to modify on the next flag addition.  Adjust
some formatting while at it.

* src/conf/domain_conf.c (verify): Move closer to internal flag
definitions.  Cover missing flags ALLOW_ROM and ALLOW_BOOT.
Signed-off-by: NEric Blake <eblake@redhat.com>

While prepping for virDomainBlockJob patches, I found some dead code.

* tools/virsh-domain.c (blockJobImpl): Kill unused 'name'.
Signed-off-by: NEric Blake <eblake@redhat.com>

In qemuDomainRevertToSnapshot(), it will check snap->def->state.
But when the state is PMSUSPENDED/NOSTATE/BLOCKED, it forgets to
call qemuDomainObjEndJob.

https://bugzilla.redhat.com/show_bug.cgi?id=1134154
Bug introduced in commit 1e833899.
Signed-off-by: NJincheng Miao <jmiao@redhat.com>
Signed-off-by: NEric Blake <eblake@redhat.com>

Let's fix this before we bake in a painful API.  Since we know
that we have exactly one non-negative fd on success, we might
as well return the fd directly instead of forcing the user to
pass in a pointer.  Furthermore, I found some memory and fd
leaks while reviewing the code - the idea is that on success,
libvirtd will have handed two fds in two different directions:
one to qemu, and one to the RPC client.

* include/libvirt/libvirt.h.in (virDomainOpenGraphicsFD): Drop
unneeded parameter.
* src/driver.h (virDrvDomainOpenGraphicsFD): Likewise.
* src/libvirt.c (virDomainOpenGraphicsFD): Adjust interface to
return fd directly.
* daemon/remote.c (remoteDispatchDomainOpenGraphicsFd): Adjust
semantics.
* src/qemu/qemu_driver.c (qemuDomainOpenGraphicsFD): Likewise,
and plug fd leak.
* src/remote/remote_driver.c (remoteDomainOpenGraphicsFD):
Likewise, and plug memory and fd leak.
Signed-off-by: NEric Blake <eblake@redhat.com>

This commit (finally) adds the virDomainBlockCopy API, with the
intent that it will provide more power to the existing 'virsh
blockcopy' command.

'virsh blockcopy' was first added in Apr 2012 (v0.9.12), which
corresponds to the upstream qemu 1.2 timeframe.  It was done as
a hack on top of the existing virDomainBlockRebase() API call,
for two reasons: 1) it was targetting a feature that landed first
in downstream RHEL qemu, but had not stabilized in upstream qemu
at the time (and indeed, 'drive-mirror' only landed upstream in
qemu 1.3 with slight differences to the first RHEL attempt,
and later gained further parameters like granularity and buf-size
that are also worth exposing), and 2) extending an existing API
allowed it to be backported without worrying about bumping .so
versions.  A virDomainBlockCopy() API was proposed at that time
[1], but we decided not to accept it into libvirt until after
upstream qemu stabilized, and it ended up getting scrapped.
Whether or not RHEL should have attempted adding a new feature
without getting it upstream first is a debate that can be held
another day; but enough time has now elapsed that we are ready to
do the interface cleanly.

[1] https://www.redhat.com/archives/libvir-list/2012-April/msg00768.html

Delaying the creation of a clean API until now has also had a
benefit: we've only recently learned of a few shortcomings in the
original design: 1) it is unable to target a network destination
(such as a gluster volume) because it hard-coded the assumption
that the destination is a local file name.  Because of all the
refactoring we've done to add virStorageSourcePtr, we are in a
better position to declare an API that parses XML describing a
host storage source as the copy destination, which was not
possible had we implemented virDomainBlockCopy as it had been
originally envisioned (although a network target will have to wait
until a later libvirt release compared to the API addition to
actually be implemented).  2) the design of using MiB/sec as the
bandwidth throttle is rather coarse; qemu is actually tuned to
bytes/second, and libvirt is preventing access to that level of
detail.  A later patch will add flags to existing block job API
that can request bytes/second instead of back-compat MiB/s, but as
this is a new API, we can get it right to begin with.

At least I had the foresight to create 'virsh blockcopy' as a
separate command at the UI level (commit 1f06c007) rather than
leaking the underlying API overload of virDomainBlockRebase onto
shell users.

A further note on the bandwidth option: virTypedParameters
intentionally lacks unsigned long (since variable-width
interaction between mixed 32- vs. 64-bit client/server setups is
nasty), but we have to deal with the fact that we are interacting
with existing older code that mistakenly chose unsigned long
bandwidth at a point before we decided to prohibit it in all new
API.  The typed parameter is therefore unsigned long long, but
the implementation (in a later patch) will have to do overflow
detection on 32-bit platforms, as well as capping the value to
match the LLONG_MAX>>20 cap of the existing MiB/s interfaces.

* include/libvirt/libvirt.h.in (virDomainBlockCopy): New API.
(virDomainBlockJobType, virConnectDomainEventBlockJobStatus):
Update related documentation.
* src/libvirt.c (virDomainBlockCopy): Implement it.
* src/libvirt_public.syms (LIBVIRT_1.2.8): Export it.
* src/driver.h (_virDriver): New driver callback.
Signed-off-by: NEric Blake <eblake@redhat.com>

Split out guts of the function to reuse it to get domain objects from
string.

The motivation for this API is that management layers that use libvirt
usually poll for statistics using various split up APIs we currently
provide. To get all the necessary stuff, the app needs to issue a lot of
calls and aggregate the results.

The APIs I'm introducing here:
1) Returns data in a format that we can expand in the future and is
(pseudo) hierarchical. The data is returned as typed parameters where
the fields are constructed as dot-separated strings containing names and
other stuff in a list of typed params.

2) Stats for multiple (all) domains can be queried at once and are
returned in one call. This will decrease the overhead necessary to issue
multiple calls per domain multiplied by the count of domains.

3) Selectable (bit mask) fields in the returned format. This will allow
to retrieve only specific stats according to the app's need.

The stats groups will be enabled using a bit field @stats passed as the
function argument. A few sample stats groups that this API will support:

VIR_DOMAIN_STATS_STATE
VIR_DOMAIN_STATS_CPU
VIR_DOMAIN_STATS_BLOCK
VIR_DOMAIN_STATS_INTERFACE

(Note that this is only an example, the initial implementation supports
 only VIR_DOMAIN_STATS_STATE while others will be added later.)

the returned typed params will use the following scheme

state.state = VIR_DOMAIN_RUNNING
state.reason = VIR_DOMAIN_RUNNING_BOOTED (the actual values according to
                                          the enum)
cpu.count = 8
cpu.0.state = running
cpu.0.time = 1234

Should fix https://bugzilla.redhat.com/show_bug.cgi?id=999926

Define the public API implementation and declare internal
driver prototype.

According to docs/schemas/domaincommon.rng and _virDomainBlockIoTuneInfo
all the iotune values are interpreted as unsigned long long, however
according to qemu_monitor_json.c, qemu silently truncates numbers
larger than LLONG_MAX. There's really not much of a usage for such
large numbers anyway yet. This patch provides the same overflow
check during a domain start as it does during setting
a blkdeviotune element in qemu_driver.c and thus reports an error when
a larger number than LLONG_MAX is detected.

https://bugzilla.redhat.com/show_bug.cgi?id=1131876

If the virConnect did not succeeed, we called
virConnectClose on uninitialized data.

Introduced by commit 7eabd550.

Introduced by commit 395171f8.
Signed-off-by: NChen Fan <chen.fan.fnst@cn.fujitsu.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>

QEMU 2.1 added support for the kvm=off option to the -cpu command,
allowing the KVM hypervisor signature to be hidden from the guest.
This enables disabling of some paravirualization features in the
guest as well as allowing certain drivers which test for the
hypervisor to load.  Domain XML syntax is as follows:

<domain type='kvm>
  ...
  <features>
    ...
    <kvm>
      <hidden state='on'/>
    </kvm>
  </features>
  ...
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>

Commit b55cc5f4 did a shallow copy of libxl_{sdl,vnc}_info from the
domain config to the build info, which resulted in double-freeing
strings contained in the structures during cleanup, which later
resulted in a libvirtd crash.  Fix by performing a deep copy of the
structure, VIR_STRDUP'ing embedded strings instead of simply copying
their pointers.

Fixes the following issue reported on the libvirt dev list

https://www.redhat.com/archives/libvir-list/2014-August/msg01112.html

I noticed a line 'int nparams = 0;;' in remote_dispatch.h, and
tracked down where it was generated.  While at it, I found a
couple of other double semicolons.  Additionally, I noticed that
commit df0b57a9 left a stale reference to the file name
remote_dispatch_bodies.h.

* src/conf/numatune_conf.c (virDomainNumatuneNodeParseXML): Drop
empty statement.
* tests/virdbustest.c (testMessageStruct, testMessageSimple):
Likewise.
* src/rpc/gendispatch.pl (remote_dispatch_bodies.h): Likewise, and
update stale comments.
Signed-off-by: NEric Blake <eblake@redhat.com>

RHEL 5 is based on libvirt 0.8.2, as was Fedora 13.  RHEL 5 also
happens to be the oldest box that we actively support with a
buildbot, so it is time to clean up some crufty conditionals in
the spec file that no longer are necessary for modern Fedora.

Although it is probably okay to make further simplifications to
a newer minimum Fedora version, that can be done as a later patch.
This patch just focuses on cleaning any comparison of %{?fedora}
that will always be true or false once we assume a minimum of F13.

* libvirt.spec.in: Make with_audit default to on. Move other
conditionals to a single RHEL-5 block. Simplify any fedora
comparison older than 13.  Document our assumptions.
Signed-off-by: NEric Blake <eblake@redhat.com>

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>