The ACL check didn't check the VIR_DOMAIN_XML_SECURE flag and the
appropriate permission for it.

(cherry picked from commit 03c3c0c8)

Avoid leaving the domain locked on a failed ACL check in
qemuDomainMigratePerform() and qemuDomainMigrateFinish2().

Introduced in commit abf75aea (Add ACL checks into the QEMU driver).

(cherry picked from commit 2bdcd29c)

Live definition was used to look up the disk index while persistent one
was indexed leading to a crash in qemuDomainGetBlockIoTune. Use the
correct def and report a nice error.

Unfortunately it's accessible via read-only connection, though it can
only crash libvirtd in the cases where the guest is hot-plugging disks
without reflecting those changes to the persistent definition.  So
avoiding hotplug, or doing hotplug where persistent is always modified
alongside live definition, will avoid the out-of-bounds access.

Introduced in: eca96694a (v0.9.8)
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1140724Reported-by: NLuyao Huang <lhuang@redhat.com>
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

(cherry picked from commit 3e745e8f)

We have the following matrix of possible arguments handled by the logic
statement touched by this patch:
       | flags & _REUSE_EXT | !(flags & _REUSE_EXT)
-------+--------------------+----------------------
 format| (1)                | (2)
-------+--------------------+----------------------
!format| (3)                | (4)
-------+--------------------+----------------------

In cases 1 and 2 the user provided a format, in cases 3 and 4 not. The
user requests to use a pre-existing image in 1 and 3 and libvirt will
create a new image in 2 and 4.

The difference between cases 3 and 4 is that for 3 the format is probed
from the user-provided image, whereas in 4 we just use the existing disk
format.

The current code would treat cases 1,3 and 4 correctly but in case 2 the
format provided by the user would be ignored.

The particular piece of code was broken in commit 35c7701c
but since it was introduced a few commits before that it was never
released as working.

(cherry picked from commit 42619ed0)
Signed-off-by: NEric Blake <eblake@redhat.com>

Conflicts:
	src/qemu/qemu_driver.c - no refactoring of commit 7b7bf001

When creating a new disk mirror the new struct is stored in a separate
variable until everything went well. The removed hunk would actually
remove existing mirror information for example when the api would be run
if a mirror still exists.

(cherry picked from commit 02b364e1)

This fixes a regression introduced in commit ff5f30b6.
Signed-off-by: NEric Blake <eblake@redhat.com>

Conflicts:
	src/qemu/qemu_driver.c - no refactoring of commit 7b7bf001

In all other drivers we are doing so. Moreover, we don't want to parse
runtime information in attach (even if the attach is meant as live)
because we are generating the runtime info ourselves. We can't trust
users they supply sane values anyway.

==1140== 9 bytes in 1 blocks are definitely lost in loss record 72 of 1,151
==1140==    at 0x4A06C2B: malloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==1140==    by 0x623C758: xmlStrndup (in /usr/lib64/libxml2.so.2.9.1)
==1140==    by 0x50FD763: virXMLPropString (virxml.c:483)
==1140==    by 0x510F8B7: virDomainDeviceInfoParseXML (domain_conf.c:3685)
==1140==    by 0x511ACFD: virDomainChrDefParseXML (domain_conf.c:7535)
==1140==    by 0x5121D13: virDomainDeviceDefParse (domain_conf.c:9918)
==1140==    by 0x13AE6313: qemuDomainAttachDeviceFlags (qemu_driver.c:6926)
==1140==    by 0x13AE65FA: qemuDomainAttachDevice (qemu_driver.c:7005)
==1140==    by 0x51C77DA: virDomainAttachDevice (libvirt.c:10231)
==1140==    by 0x127FDD: remoteDispatchDomainAttachDevice (remote_dispatch.h:2404)
==1140==    by 0x127EC5: remoteDispatchDomainAttachDeviceHelper (remote_dispatch.h:2382)
==1140==    by 0x5241F81: virNetServerProgramDispatchCall (virnetserverprogram.c:437)

When doing live attach, we are passing the inactive definition anyway
since we are passing the result of virDomainDeviceDefCopy() which does
inactive copy by default.

Moreover, we are doing the same mistake in qemuhotplugtest.

Just a side note - it makes perfect sense to parse the runtime info
like alias in qemuDomainDetachDevice and qemuDomainUpdateDeviceFlags()
as in some cases the only difference to distinguish two devices can be
just their alias.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Currently, the Linux kernel treats values of '0' and '1' as
the minimum of 2. Values larger than the maximum are changed
to the maximum.

Re-reading the shares value after setting it reflects this in
the live domain XML.

Currently, <cputune><shares>0</shares></cputune> is treated
as if it were not specified.

Treat is as a valid value if it was explicitly specified
and write it to the cgroups.

qemuDomainSetSchedulerParametersFlags() calls virQEMUDriverGetConfig() twice
and makes the reference counter leak. This removes redundant call.

Problem introduced in commit 45ad1adbSigned-off-by: NEric Blake <eblake@redhat.com>

This patch makes qemu driver support virDomainCoreDumpWithFormat API.
Signed-off-by: NQiao Nuohan <qiaonuohan@cn.fujitsu.com>

It's finally time to start tracking disk backing chains in
<domain> XML.  The first step is to start refactoring code
so that we have an object more convenient for representing
each host source resource in the context of a single guest
<disk>.  Ultimately, I plan to move the new type into src/util
where it can be reused by virStorageFile, but to make the
transition easier to review, this patch just creates the
new type then fixes everything until it compiles again.

* src/conf/domain_conf.h (_virDomainDiskDef): Split...
(_virDomainDiskSourceDef): ...to new struct.
(virDomainDiskAuthClear): Use new type.
* src/conf/domain_conf.c (virDomainDiskDefFree): Split...
(virDomainDiskSourceDefClear): ...to new function.
(virDomainDiskGetType, virDomainDiskSetType)
(virDomainDiskGetSource, virDomainDiskSetSource)
(virDomainDiskGetDriver, virDomainDiskSetDriver)
(virDomainDiskGetFormat, virDomainDiskSetFormat)
(virDomainDiskAuthClear, virDomainDiskGetActualType)
(virDomainDiskDefParseXML, virDomainDiskSourceDefFormat)
(virDomainDiskDefFormat, virDomainDiskDefForeachPath)
(virDomainDiskDefGetSecurityLabelDef)
(virDomainDiskSourceIsBlockType): Adjust all users.
* src/lxc/lxc_controller.c (virLXCControllerSetupDisk):
Likewise.
* src/lxc/lxc_driver.c (lxcDomainAttachDeviceMknodHelper):
Likewise.
* src/qemu/qemu_command.c (qemuAddRBDHost, qemuParseRBDString)
(qemuParseDriveURIString, qemuParseGlusterString)
(qemuParseISCSIString, qemuParseNBDString)
(qemuDomainDiskGetSourceString, qemuBuildDriveStr)
(qemuBuildCommandLine, qemuParseCommandLineDisk)
(qemuParseCommandLine): Likewise.
* src/qemu/qemu_conf.c (qemuCheckSharedDevice)
(qemuAddISCSIPoolSourceHost, qemuTranslateDiskSourcePool):
Likewise.
* src/qemu/qemu_driver.c (qemuDomainUpdateDeviceConfig)
(qemuDomainPrepareDiskChainElement)
(qemuDomainSnapshotCreateInactiveExternal)
(qemuDomainSnapshotPrepareDiskExternalBackingInactive)
(qemuDomainSnapshotPrepareDiskInternal)
(qemuDomainSnapshotPrepare)
(qemuDomainSnapshotCreateSingleDiskActive)
(qemuDomainSnapshotUndoSingleDiskActive)
(qemuDomainBlockPivot, qemuDomainBlockJobImpl)
(qemuDomainBlockCopy, qemuDomainBlockCommit): Likewise.
* src/qemu/qemu_migration.c (qemuMigrationIsSafe): Likewise.
* src/qemu/qemu_process.c (qemuProcessGetVolumeQcowPassphrase)
(qemuProcessInitPasswords): Likewise.
* src/security/security_selinux.c
(virSecuritySELinuxSetSecurityFileLabel): Likewise.
* src/storage/storage_driver.c (virStorageFileInitFromDiskDef):
Likewise.
* tests/securityselinuxlabeltest.c (testSELinuxLoadDef):
Likewise.
Signed-off-by: NEric Blake <eblake@redhat.com>

Part of a series of cleanups to use new accessor methods.

* src/qemu/qemu_conf.c (qemuCheckSharedDevice)
(qemuAddSharedDevice, qemuRemoveSharedDevice, qemuSetUnprivSGIO):
Use accessors.
* src/qemu/qemu_domain.c (qemuDomainDeviceDefPostParse)
(qemuDomainObjCheckDiskTaint, qemuDomainSnapshotForEachQcow2Raw)
(qemuDomainCheckRemoveOptionalDisk, qemuDomainCheckDiskPresence)
(qemuDiskChainCheckBroken, qemuDomainDetermineDiskChain):
Likewise.
* src/qemu/qemu_hotplug.c (qemuDomainChangeEjectableMedia)
(qemuDomainCheckEjectableMedia)
(qemuDomainAttachVirtioDiskDevice, qemuDomainAttachSCSIDisk)
(qemuDomainAttachUSBMassstorageDevice)
(qemuDomainAttachDeviceDiskLive, qemuDomainRemoveDiskDevice)
(qemuDomainDetachVirtioDiskDevice, qemuDomainDetachDiskDevice):
Likewise.
* src/qemu/qemu_migration.c (qemuMigrationStartNBDServer)
(qemuMigrationDriveMirror, qemuMigrationCancelDriveMirror)
(qemuMigrationIsSafe): Likewise.
* src/qemu/qemu_process.c (qemuProcessGetVolumeQcowPassphrase)
(qemuProcessHandleIOError, qemuProcessHandleBlockJob)
(qemuProcessInitPasswords): Likewise.
* src/qemu/qemu_driver.c (qemuDomainChangeDiskMediaLive)
(qemuDomainGetBlockInfo, qemuDiskPathToAlias): Likewise.
Signed-off-by: NEric Blake <eblake@redhat.com>

When checking compatibility of a device with a domain definition, we
should know what we're going to do with the device. Because we may need
to check for different things when we're attaching a new device versus
detaching an existing device.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

A device needs to be checked for compatibility with the domain
definition it corresponds to. Specifically, for VIR_DOMAIN_AFFECT_CONFIG
case we should check against persistent def rather than active def.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Wire up all the pieces to send arbitrary qemu events to a
client using libvirt-qemu.so.  If the extra bookkeeping of
generating event objects even when no one is listening turns
out to be noticeable, we can try to further optimize things
by adding a counter for how many connections are using events,
and only dump events when the counter is non-zero; but for
now, I didn't think it was worth the code complexity.

* src/qemu/qemu_driver.c
(qemuConnectDomainQemuMonitorEventRegister)
(qemuConnectDomainQemuMonitorEventDeregister): New functions.
* src/qemu/qemu_monitor.h (qemuMonitorEmitEvent): New prototype.
(qemuMonitorDomainEventCallback): New typedef.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONIOProcessEvent):
Report events.
* src/qemu/qemu_monitor.c (qemuMonitorEmitEvent): New function, to
pass events through.
* src/qemu/qemu_process.c (qemuProcessHandleEvent): Likewise.
Signed-off-by: NEric Blake <eblake@redhat.com>

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Any source file which calls the logging APIs now needs
to have a VIR_LOG_INIT("source.name") declaration at
the start of the file. This provides a static variable
of the virLogSource type.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

We allow translation from no_bandwidth to has_bandwidth for a vnic.
However, going in the opposite direction is not implemented. It's not
limitation of the API rather than internal implementation. The problem
is, we correctly detect that user hasn't specified any outbound (say
he wants to clear out outbound). However, this gets overwritten by
current vnic outbound settings. Then, virNetDevBandwidthSet doesn't
change anything. We need to stop overwriting the outbound if users
don't want us to. Same applies for inbound.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Eliminate all the code re-use which checks for priv->agentError or
priv->agent.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Coverity found an issue in lxc_driver and uml_driver that we don't
check the return value of register functions.

I've also updated all other places and unify the way we check the
return value.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Right now we are parsing the XML as though it's live, which for example
will choke on hardcoded XML like:

  <seclabel type='dynamic' model='selinux' relabel='yes'/>

Erroring with:

  $ sudo virsh domxml-to-native qemu-argv f
  error: XML error: security label is missing

All drivers are fixed, but only qemu was tested.

-S causes qemu to start in the paused state. Since XML2Native is intended
to generate something that users can run directly, this will trip them up.

Change any method names with Usb, Pci or Scsi to use
USB, PCI and SCSI since they are abbreviations.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

While investigating https://bugzilla.redhat.com/show_bug.cgi?id=1061827
I noticed that we pass user input unscathed for block-pull, but
always pass a canonical absolute name through for block-commit.
[Note that we probably _ought_ to validate that the user's request
for block-pull actually matches the backing chain, the way we already
do for block-commit - but that's a separate issue.  Further note that
the ability to pass user input through unscathed allows backdoors
such as specifying a backing image that is a network URI such as
a gluster disk, instead of forcing things to the local file system;
which is an area still under active investigation on whether libvirt
needs to behave differently for network disks.]

Since qemu may write the name that the user passed in as the backing
file, a user may have a reason to want a relative file name passed
through to qemu, and always munging things to absolute prevents that.

Put another way, if you have the backing chain:

[A] <- [B(back=./A)] <- [C(back=./B)]

and commit B into A (virsh blockcommit $dom vda --base A --top B),
the metadata of C will have to be re-written. But should it be
rewritten as [C(back=./A)] or as [C(back=/path/to/A)]?  Still up in
the air is whether qemu's decision should be based on whether B
and/or C had relative paths, or on whether the --base and/or
--top arguments to the command were relative paths; but if we always
pass a canonical name, we've prevented the spelling of the command
arguments from being part of the hueristics that qemu uses.

I also audited the code, and verified that we never call
qemuMonitorBlockCommit() with a NULL base, either before or after
the change to qemu_driver.c.

* src/qemu/qemu_driver.c (qemuDomainBlockCommit): Preserve user's
spelling, since absolute vs. relative matters to qemu.
* src/qemu/qemu_monitor.h (qemuMonitorBlockCommit): Base is never
null.
* src/qemu/qemu_monitor.c (qemuMonitorBlockCommit): Likewise.
* src/qemu/qemu_monitor_json.h (qemuMonitorJSONBlockCommit):
Likewise.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONBlockCommit):
Likewise.
Signed-off-by: NEric Blake <eblake@redhat.com>

The qemu_bridge_filter.c file had some helpers for calling
the ebtablesXXX functions todo bridge filtering. The only
thing these helpers did was to overwrite the original error
message from the ebtables code. For added fun, the callers
of these helpers overwrote the errors yet again. For even
more fun, one of the helpers called another helper and
overwrite its errors too.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Extracting capabilities from QEMU takes a notable amount of time
when all QEMU binaries are installed. Each system emulator
needs about 200-300ms multiplied by 26 binaries == ~5-8 seconds.

This change causes the QEMU driver to save an XML file containing
the content of the virQEMUCaps object instance in the cache
dir eg /var/cache/libvirt/qemu/capabilities/$SHA256(binarypath).xml
or $HOME/.cache/libvirt/qemu/cache/capabilities/$SHA256(binarypath).xml

We attempt to load this and only if it fails, do we fallback to
probing the QEMU binary. The ctime of the QEMU binary and libvirtd
are stored in the cached file and its data discarded if either
of them change.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

This fixes a possible double free. In virNetworkAssignDef() if
virBitmapNew() fails, then virNetworkObjFree(network) is called.
However, with network->def pointing to actual @def. So if caller
frees @def again, ...

Moreover, this fixes one possible memory leak too. In
virInterfaceAssignDef() if appending to the list of interfaces
fails, we ought to call virInterfaceObjFree() instead of bare
VIR_FREE().

Although, in order to do that some array size variables needs
to be turned into size_t rather than int.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

When domain is started with setting that cannot be done, i.e. those
that require cgroups, there is no error reported and it succeeds
without any message whatsoever.

When setting with API, virsh, an error is reported, but only due to
the fact that no cgroups are mounted (priv->cgroup == NULL).

Given the above it seems reasonable to reject such unsupported
settings.

This patch effectively changes the error message from:

$ virsh -c qemu:///session schedinfo dummy
Scheduler      : Unknown
error: Requested operation is not valid: cgroup CPU controller is not mounted

to:

$ virsh -c qemu:///session schedinfo dummy
Scheduler      : Unknown
error: Operation not supported: CPU tuning is not available in session mode

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1023366Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Specify which driver and which domain in used_by area to avoid conflict among
different drivers.
Signed-off-by: NChunyan Liu <cyliu@suse.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1071264

Reverting of external snapshots is not supported currently. The check
that is present doesn't properly check for all aspects that make a
snapshot external. Use virDomainSnapshotIsExternal() to do the check.

As of 0bd2ccde an empty disk path for virDomainBlockStats (or the one
with Flags) is allowed meaning "get me overall summarized statistics".
However, running 'virsh domblkstat $dom' throws a misleading error:

  # ./tools/virsh domblkstat dom
  error: Failed to get block stats dom
  error: invalid argument: invalid path:

while after this commit

  # virsh domblkstat dom
  error: Operation not supported: summary statistics are not supported yet
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1038363

If a domain has a different maximum for persistent and live maxmem
or max vcpus, then it is possible to hit cases where libvirt
refuses to adjust the current values or gets halfway through
the adjustment before failing.  Better is to determine up front
if the change is possible for all requested flags.

Based on an idea by Geoff Franks.

* src/qemu/qemu_driver.c (qemuDomainSetMemoryFlags): Compute
correct maximum if both live and config are being set.
(qemuDomainSetVcpusFlags): Likewise.
Signed-off-by: NEric Blake <eblake@redhat.com>

To reuse this from other drivers, like lxc.