- 16 6月, 2015 25 次提交
-
-
由 Martin Kletzander 提交于
On older systems it shadows global declaration of daemon() function. Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
由 Martin Kletzander 提交于
Commit fa142073 added forward declaration of virNetServerPtr into virnetserver.h even though we are keeping these in virnetserverprogram.h due to older compilers having problems with duplicate ones. Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
由 Martin Kletzander 提交于
This reverts commit 6bda9f8a. I mistakenly pushed it along with the Admin API series.
-
由 Martin Kletzander 提交于
This reverts commit 5792fabb. I mistakenly pushed it along with the Admin API series.
-
由 Martin Kletzander 提交于
This reverts commit 4e7ccf87. I mistakenly pushed it along with the Admin API series.
-
由 Martin Kletzander 提交于
Since the background for Admin API is merged upstream, we are bumping the minor release version as discussed previously Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
由 Martin Kletzander 提交于
You had only one job. That's what you can say about this example binary. In future, parts of virsh that are usable for this binary should be split into separate shell-utils and virt-admin should gain all the cool features of virsh without too much code addition. Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
由 Martin Kletzander 提交于
Just one of the simplest functions that returns string "Clients: X" where X is the number of connected clients to daemon's first subserver (the original one), so it can be tested using virsh, ipython, etc. The subserver is gathered by incrementing its reference counter (similarly to getting qemu capabilities), so there is no deadlock with admin subserver in this API. Here you can see how functions should be named in the client (virAdm*) and server (adm*). There is also a parameter @flags that must be 0, which helps testing proper error propagation into the client. Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
由 Martin Kletzander 提交于
This function accesses the number of connected clients while properly locking the server it returns the data about. Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
由 Martin Kletzander 提交于
For this to pe properly separated from other protocols used by the server, there is second server added which allows access to the whole virNetDaemon to its clients. Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
由 Martin Kletzander 提交于
This is not going to be very widely used, but for some corner cases and easier (unsafe) debugging, it might be nice. Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
由 Martin Kletzander 提交于
No online docs are build from it since it doesn't really fit into our document structure and new page will need to be created for it, but this is at least a heads-up commit for easier parsing in order to build some documentation (or python bindings) later on. Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
由 Martin Kletzander 提交于
Initial scratch of the admin library. It has its own virAdmConnectPtr that inherits from virAbstractConnectPtr and thus trivially supports error reporting. There's pkg-config file added and spec-file adjusted as well. Since the library should be "minimalistic" and not depend on any other library, the list of files is especially crafted for it. Most of them could've been put to it's own sub-libraries that would be LIBADD'd to libvirt_util, libvirt_net_rpc and libvirt_setuid_rpc_client to minimize the number of object files being built, but that's a refactoring that isn't the orginal aim of this commit. Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
由 Martin Kletzander 提交于
Just the addition of VIR_FROM_ADMIN to the enum of error domains. Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
由 Martin Kletzander 提交于
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
由 Martin Kletzander 提交于
For now there are only CONNECT_OPEN and CONNECT_CLOSE procedures. Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
由 Martin Kletzander 提交于
Since this is just a new option for gendispatch, it looks more like a cleanup. The only differences handled by it are connect pointers, private pointers and API naming customs. Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
由 Martin Kletzander 提交于
Rename the test to virnetdaemontest and use virNetDaemon objects instead of virNetServer inside. Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
由 Martin Kletzander 提交于
This allows to have more servers in one daemon which helps isolating some resources. Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
由 Cédric Bosdonnat 提交于
Add the qemu-nbd tasks to the container cgroup to make sure those will be killed when the container is stopped. In order to reliably get the qemu-nbd tasks PIDs, we use /sys/devices/virtual/block/<DEV>/pid as qemu-nbd is daemonizing itself.
-
由 Cédric Bosdonnat 提交于
This function gets all the PIDs listed in /proc/PID/task. This will be needed at least to move all qmeu-nbd tasks to the container cgroup.
-
由 John Ferlan 提交于
https://bugzilla.redhat.com/show_bug.cgi?id=1186969 When generating the path to the dir for a CIFS/Samba driver, the code would generate a source path for the mount using "%s:%s" while the mount.cifs expects to see "//%s/%s". So check for the cifsfs and format the source path appropriately. Additionally, since there is no means to authenticate, the mount needs a "-o guest" on the command line in order to anonymously mount the Samba directory.
-
由 John Ferlan 提交于
In order for the glusterfs boolean to be set, the pool->def->type must be VIR_STORAGE_POOL_NETFS, thus the check within virCommandNewArgList whether pool->def->type is VIR_STORAGE_POOL_FS will never be true, so remove it
-
由 John Ferlan 提交于
Commit id '887dd362' added support for a netfs pool format type 'cifs' and 'gluster' in order to add rng support for Samba and glusterfs netfs pools. Originally, the CIFS type support was added as part of commit id '61fb6979'. Eventually commit id 'b325be12' fixed the gluster rng definition to match expectations. As it turns out the CIFS rng needed a similar change since the directory path is not an absDirPath, rather just a dirPath will be required.
-
由 Guido Günther 提交于
We're using Polkit's DBus API so no need to check wether this feature is supported. We don't use the result or the path to the pkcheck program anywhere.
-
- 15 6月, 2015 14 次提交
-
-
由 Martin Kletzander 提交于
We were using "complicated" error printing in virnetservertest even though we could've just dispatched the error. Also add some good practices that might come in handy (the code may fail without proper initialization and event loop). Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
由 Martin Kletzander 提交于
One string was already used only if that condition was true, second one is added now. Both are used in a nicer way. Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
由 Martin Kletzander 提交于
If virNetServerMDNSAddEntry() fails when adding a service to a server, it doesn't decrease the number of services. Hence access to their members segfaults (e.g. when free()-ing the sruct). Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
由 Martin Kletzander 提交于
Suggested-by: NMichal Prívozník <mprivozn@redhat.com> Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
由 Boris Fiuczynski 提交于
The search for the memory balloon driver object is extended by a second known name "virtio-balloon-ccw" in support for virtio-ccw. Signed-off-by: NBoris Fiuczynski <fiuczy@linux.vnet.ibm.com> Reviewed-by: NDaniel Hansel <daniel.hansel@linux.vnet.ibm.com> Reviewed-by: NEric Farman <farman@linux.vnet.ibm.com> Reviewed-by: NStefan Zimmermann <stzi@linux.vnet.ibm.com>
-
由 Ján Tomko 提交于
The --xml option is mandatory if an XML description is used. Otherwise the third parameter is treated as the destination. https://bugzilla.redhat.com/show_bug.cgi?id=1206406#c3
-
由 Peter Krempa 提交于
Similarly to a02a161b remove the default pinning assumption from emulatorpin. Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1227180
-
由 Michal Privoznik 提交于
Instead of initializing return value to zero (success) and overwriting it on every failure just before the control jumps onto 'out' label, let's initialize to an error value and set to zero only when we are sure about the success. Just follow the pattern we have in the rest of the code. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Michal Privoznik 提交于
Instead of initializing return value to zero (success) and overwriting it on every failure just before the control jumps onto 'out' label, let's initialize to an error value and set to zero only when we are sure about the success. Just follow the pattern we have in the rest of the code. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 John Ferlan 提交于
https://bugzilla.redhat.com/show_bug.cgi?id=1225694 Check if the disk partition to be wiped is the extended partition, if so then disallow it. Do this via changing the wipeVol backend to check the volume before passing to the common virStorageBackendVolWipeLocal
-
由 Ján Tomko 提交于
-
由 John Ferlan 提交于
https://bugzilla.redhat.com/show_bug.cgi?id=1021480 Seems the property has been deprecated for qemu, although seemingly ignored. This patch enforces from a libvirt perspective that a scsi-block 'lun' device should not provide the 'serial' property.
-
由 John Ferlan 提交于
https://bugzilla.redhat.com/show_bug.cgi?id=1200206 Commit id '1b4eaa61' added the ability to have a mode='direct' for an iscsi disk volume. It relied on virStorageTranslateDiskSourcePool in order to copy any disk source pool authentication information to the direct disk volume, but it neglected to also copy the 'secrettype' field which ends up being used in the domain volume formatting code. Adding a secrettype for this case will allow for proper formatting later and allow disk snapshotting to work properly Additionally libvirtd restart processing would fail to find the domain since the translation processing code is run after domain xml processing, so handle the the case where the authdef could have an empty secrettype field when processing the auth and additionally ignore performing the actual and expected auth secret type checks for a DISK_VOLUME since that data will be reassembled later during translation processing of the running domain.
-
由 Michal Privoznik 提交于
During a review, I've noticed this error message that was eventually produced when I was trying to define a domain: error: invalid argument: could not find capabilities for arch=mips64el domaintype=(null) Look at the (null). Why is it there? Well, during XML parsing, we try to look up the default emulator for given OS type and possibly virt type too. And this is the problem, because if we don't want to look up by virt type, a -1 is passed to note this fact. Later, the code handles -1 just right. Except for error message. When it is constructed (in a very fabulous way I must say), the value is compared to zero, not -1. And since we don't have any translation from -1 to a virt type string, we just print (null). Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
- 13 6月, 2015 1 次提交
-
-
由 Anthony PERARD 提交于
Signed-off-by: NAnthony PERARD <anthony.perard@citrix.com>
-