Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NDaniel Henrique Barboza <danielhb413@gmail.com>

Since commit 44e7f029
    util: rewrite auto cleanup macros to use glib's equivalent

VIR_AUTOFREE is just an alias for g_autofree. Use the GLib macros
directly instead of our custom aliases.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

Use G_GNUC_UNUSED from GLib instead of ATTRIBUTE_UNUSED.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

virDomainGetBlockInfo() returns error if called on a disk with no
source (a sourceless disk might be a removable media drive with no
media in it, for instance an empty CDROM or floppy drive).

So far this caused the virsh domblkinfo --all command to abort and
ignore any remaining (not yet displayed) disk devices.  This patch
fixes the problem by first checking for existence of a <source>
element in the corresponding XML.  If none is found, we avoid calling
virDomainGetBlockInfo() altogether as we know it's bound to fail in
that case.

https://bugzilla.redhat.com/show_bug.cgi?id=1619625Signed-off-by: NPavel Mores <pmores@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>

Introduce a bunch of new virsh commands for managing checkpoints in
isolation. More commands are needed for performing incremental
backups, but these commands were easy to implement by modeling heavily
after virsh-snapshot.c. There is no need for checkpoint-revert or
checkpoint-current since those snapshot APIs have no checkpoint
counterpart.  Similarly, it is not necessary to change which
checkpoint is current when redefining from XML, since until we
integrate checkpoints with snapshots, there is only a linear chain
(and you can deduce the current checkpoint by instead using
'checkpoint-list --leaves').  Other aspects of checkpoint-list are
also a bit simpler than the snapshot counterpart, in part because we
don't have to cater to back-compat to older API.

Upcoming patches will test these interfaces once the test driver
supports checkpoints.
Signed-off-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

Qemu added reporting of virtio balloon new statistics stat-htlb-pgalloc and
stat-htlb-pgfail since qemu-3.0 commit b7b12644297. The value of
stat-htlb-pgalloc represents the number of successful hugetlb page allocations
while stat-htlb-pgfail represents the number of failed ones. Add this
statistics reporting to libvirt.

To enable this feature for vm, guest kenel >= 4.17 is required because
the exporting hugetlb page allocation for virtio balloon is introduced
since 6c64fe7f.
Signed-off-by: NHan Han <hhan@redhat.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

The virDomainGetDiskErrors() API copies disk targets into @disks
array that we allocate. But we forgot to free it:

==140828== 16 bytes in 4 blocks are definitely lost in loss record 41 of 242
==140828==    at 0x4C2F08F: malloc (vg_replace_malloc.c:299)
==140828==    by 0x8C406D9: strdup (in /lib64/libc-2.28.so)
==140828==    by 0x5377DD3: virStrdup (virstring.c:966)
==140828==    by 0x54C112F: testDomainGetDiskErrors (test_driver.c:3068)
==140828==    by 0x55C863D: virDomainGetDiskErrors (libvirt-domain.c:10988)
==140828==    by 0x15D1FA: cmdDomBlkError (virsh-domain-monitor.c:1215)
==140828==    by 0x17F1A8: vshCommandRun (vsh.c:1335)
==140828==    by 0x13489E: main (virsh.c:920)
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

virutil.(c|h) is a very gross collection of random code. Remove the enum
handlers from there so we can limit the scope where virtutil.h is used.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Instead of repetitive:
  s ? s : ""
use NULLSTR_EMPTY.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

Use the newly introduced macro in the few places that open-code it.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

Missing semicolon at the end of macros can confuse some analyzers
(like cppcheck <filename>), and we have a mix of semicolon and
non-semicolon usage through the code. Let's standardize on using
a semicolon for VIR_ENUM_IMPL calls.

Move the verify() statement to the end of the macro and drop
the semicolon, so the compiler will require callers to add a
semicolon.

While we are touching these call sites, standardize on putting
the closing parenth on its own line, as discussed here:
https://www.redhat.com/archives/libvir-list/2019-January/msg00750.htmlReviewed-by: NJohn Ferlan <jferlan@redhat.com>
Signed-off-by: NCole Robinson <crobinso@redhat.com>

Missing semicolon at the end of macros can confuse some analyzers
(like cppcheck <filename>), and we have a mix of semicolon and
non-semicolon usage through the code. Let's standardize on using
a semicolon for VIR_ENUM_DECL calls.

Drop the semicolon from the final statement of the macro, so
the compiler will require callers to add a semicolon.
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>
Signed-off-by: NCole Robinson <crobinso@redhat.com>

In 60046283 we've tried to remove Author(s): lines
from comments at the beginning of our source files. Well, in some
files while we removed the "Author" line we did not remove the
actual list of authors.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

Add an --iothread qualifier to domstats and an explanation in
the man page. Describe the values in as generic terms as possible
allowing each hypervisor to provide a specific algorithm to utilize
the values as it sees fit.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
ACKed-by: NMichal Privoznik <mprivozn@redhat.com>

This patch introduces a new shutdown reason "daemon" in order
to indicate that the daemon needed to force shutdown the domain
as the best course of action to take at the moment.

This action would occur during reconnection when processing
encounters an error once the monitor reconnection is successful.
Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

Signed-off-by: NSimon Kobyda <skobyda@redhat.com>

Signed-off-by: NSimon Kobyda <skobyda@redhat.com>

Signed-off-by: NSimon Kobyda <skobyda@redhat.com>

I've moved all the printing from cmdDomblkinfoPrint() to cmdDomblkinfo(),
and renamed the cmdDomblkinfoPrint() to cmdDomblkinfoGet(), since nature of
that function changed from gathering and printing informations only to
gathering information. This I believe simplifies the functions and
makes the implementation of vshTable API simpler.
Signed-off-by: NSimon Kobyda <skobyda@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1630164

The domiflist command is designed to show a brief information on
domain interfaces. One piece of information that is shows is
"Source" - source network, device, name, bridge. However, it's
ignoring vhostuser for which we can show the unix socket it's
associated with.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

In 2e974504 we've mistakenly removed gettext macro for
translating static strings. This results in table header being
printed in English regardless of user locale.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Instead of printing it straight in virsh, it creates table struct
which is filled with header and rows(domains). It allows us to know
more about table before printing to calculate alignment right.
Signed-off-by: NSimon Kobyda <skobyda@redhat.com>

QEMU commit bf1e7140e adds reporting of new balloon statistic to QEMU
2.12. Value represents the amount of memory that can be quickly
reclaimed without additional I/O. Let's add that too.
Signed-off-by: NTomáš Golembiovský <tgolembi@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

This patch introduces --all to show all block devices info
of guests like:

virsh # domblkinfo w08 --all
Target     Capacity        Allocation      Physical
---------------------------------------------------
hda        42949672960     9878110208      9878110208
vda        10737418240     10736439296     10737418240

Target     Capacity        Allocation      Physical
---------------------------------------------------
hda        40.000 GiB      9.200 GiB       9.200 GiB
vda        10.000 GiB      9.999 GiB       10.000 GiB

For inactive domains using networked storage, a "-" will
be printed instead of the value since it's not possible
to determine the value without the storage connection.
Signed-off-by: NChen Hanxiao <chenhanxiao@gmail.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Introduce helper cmdDomblkinfoPrint for printing.
Signed-off-by: NChen Hanxiao <chenhanxiao@gmail.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

This new switch can be used to set
VIR_CONNECT_GET_ALL_DOMAINS_STATS_NOWAIT flag for stats
fetching API.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Replace instances where we previously called virGetLastError just to
either get the code or to check if an error exists with
virGetLastErrorCode to avoid a validity pre-check.
Signed-off-by: NRamy Elkest <ramyelkest@gmail.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

Signed-off-by: NLin Ma <lma@suse.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Signed-off-by: NLin Ma <lma@suse.com>

centralize the definition of macro VIRSH_COMMON_OPT_DOMAIN_FULL to virsh.h
to avoid unnecessary duplicated definition
Signed-off-by: NLin Ma <lma@suse.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

commit b4b5c82c forgot to add this.
Signed-off-by: NChen Hanxiao <chenhanxiao@gmail.com>

We can use:
  domifaddr f26-cloud --source arp
to get the address.
Acked-by: NMichal Privoznik <mprivozn@redhat.com>
Signed-off-by: NChen Hanxiao <chenhanxiao@gmail.com>

For given domain fetch list of defined interfaces. This can be
used for commands like domif-getlink and others. If available,
the interface name is returned (e.g. "vnet0", usually available
only for running domains), if not the MAC address is returned.
Moreover, the detach-interface command requires only MAC address
and therefore we have new flag that forces the completer to
return just the MAC address.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Now that we have everything prepared let the fun begin. This
completer is very simple and returns domain names. Moreover,
depending on the command it can return just a subset of domains
(e.g. only running/paused/transient/.. ones).
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

According to the man page <interface-device> can be specified either by
name or MAC address, adjust the command's help accordingly.
Signed-off-by: NZhiPeng Lu <lu.zhipeng@zte.com.cn>
Reviewed-by: NErik Skultety <eskultet@redhat.com>
Signed-off-by: NErik Skultety <eskultet@redhat.com>

In some cases there's dangling backward slash at the end of multi
line macros. While technically the code works, it will stop if
some empty lines are removed.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Right-aligning backslashes when defining macros or using complex
commands in Makefiles looks cute, but as soon as any changes is
required to the code you end up with either distractingly broken
alignment or unnecessarily big diffs where most of the changes
are just pushing all backslashes a few characters to one side.

Generated using

  $ git grep -El '[[:blank:]][[:blank:]]\\$' | \
    grep -E '*\.([chx]|am|mk)$$' | \
    while read f; do \
      sed -Ei 's/[[:blank:]]*[[:blank:]]\\$/ \\/g' "$f"; \
    done
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>

Option --full will always display the name and MAC address of the
the interface. Both virsh help and virsh man page didn't mention that.
Signed-off-by: NChen Hanxiao <chenhanxiao@gmail.com>

The command tries to match interface in domain definition by MAC
address or interface name. However, since it's possible to
configure two interfaces with the same MAC address, it may
happen that the XPath returns two or more nodes. We should check
for that.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1330940

The virsh command 'domblkinfo' returns the capacity, allocation and phisycal
size of the devices attached in a domain. Usually, this sizes are very big
and hard to understand and calculate. This commits introduce a human readable
support to check the size of each field easilly.

For example, the command before:

virsh # domblkinfo my_domain hda
Capacity:       21474836480
Allocation:     14875545600
Physical:       21474836480

and after this patch:

virsh # domblkinfo my_domain hda --human
Capacity:       20.000G
Allocation:     13.900G
Physical:       20.000G
Signed-off-by: NJulio Faracco <jcfaracco@gmail.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>