When we pci_add a NIC, we need to retain the PCI address assigned by
qemu for using during detach.

* src/qemu_driver.c: use qemudParsePciAddReply() to pull the PCI
  address from the pci_add reply

* src/domain_conf.c: handle storing and parsing the PCI address in the
  domain state XML file

Currently, an interface's vlan number corresponds to its index in
the table of network interfaces. That is no longer true when we
allow devices to be removed.

To fix this, we store the vlan number in the domain's state XML
so that it survives libvirtd restarts.

* src/domain_conf.h: add vlan number to virDomainNetDef

* src/domain_conf.c: store it in XML as <state vlan='N'/>, defaulting
  to -1 if this is state saved by a previous version of libvirt

* src/qemu_conf.c: assign vlan numbers before starting qemu

We need these so that we can remove the devices via the monitor.

* src/domain_conf.h: add nic_name and hostnet_name to virDomainNetDef

* src/domain_conf.c: free nic_name and hostnet_name

* src/qemu_conf.c: add qemuAssignNetNames(), use it if qemu has
  support for the param and pass the names on the command line

* tests/qemuxml2argv*: add a test for this

When we hot-plug a disk device into a qemu guest, we need to retain its
PCI address so that it can be removed again later. Currently, we do
retain the slot number, but not across libvirtd restarts.

Add <state devaddr="xxxx:xx:xx"/> to the disk device XML config when the
VIR_DOMAIN_XML_INTERNAL_STATUS flag is used. We still don't parse the
domain and bus number, but the format allows us to do that in future.

* src/domain_conf.h: replace slotnum with pci_addr struct, add helper
  for testing whether the address is valid

* src/domain_conf.c: handle formatting and parsing the address

* src/qemu_driver.c: store the parsed slot number as a full PCI address,
  and use this address with the pci_del monitor command

* src/vbox/vbox_tmpl.c: we're debug printing slotnum here even though
  it can never be set, just delete it

We need to store things like device names and PCI slot numbers in the
qemu domain state file so that we don't lose that information on
libvirtd restart. Add a flag to indicate that this information should
be parsed or formatted.

Make bit 16 and above of the flags bitmask for internal use only and
consume the first bit for this new status flag.

* include/libvirt/libvirt.h: add VIR_DOMAIN_XML_FLAGS_MASK

* src/libvirt.c: reject private flags in virDomainGetXMLDesc()

* src/domain_conf.h: add VIR_DOMAIN_XML_INTERNAL_STATUS

* src/domain_conf.c: pass the flag from virDomainObjParseXML() and
  virDomainSaveStatus

There are no functional changes in this patch apart from adding the
monitor type to the state XML.

The patch mostly consists of switching to use virDomainChrDef every
where to describe the monitor.

* src/domain_conf.h: replace monitorpath with monitor_chr

* src/domain_conf.c: handle parsing the monitor type and initializing
  monitor chr

* src/qemu_conf.[ch]: make qemudBuildCommandLine take a
  virDomainChrDefPtr and use that to build the -monitor parameter

* src/qemu_driver.c: split pty specific and common code from
  qemudOpenMonitor, have qemudStartVMDaemon() initialize monitor_chr

* tests/qemuxml2argvtest.c: update for qemudBuildCommandLine() change

 * docs/schemas/domain.rng: Define <video> element schema
 * src/domain_conf.c, src/domain_conf.h, src/libvirt_private.syms:
   Add parsing and formatting for <video> element

Rather than numerous instances of:

emulator = vm->def->emulator;
if (!emulator)
    emulator = virDomainDefDefaultEmulator(conn, vm->def, driver->caps);
if (!emulator)
    return -1;

Set this value at XML parse time in the domain config, so we can depend on
it for all future emulator accesses. There were unchecked accesses in the
qemu driver that were tripping up on this if no emulator was specified in
the XML, see:

http://www.redhat.com/archives/libvir-list/2008-October/msg00602.html

* src/opennebula/one_conf.[ch] src/opennebula/one_driver.[ch]:
  the OpenNebula driver
* configure.in include/libvirt/virterror.h qemud/Makefile.am
  qemud/qemud.c src/Makefile.am src/domain_conf.[ch] src/driver.h
  src/libvirt.c src/virterror.c: integration of the OpenNebula
  driver in the libvirt infrastructure
* AUTHORS: add Abel Miguez Rodriguez
daniel

* docs/schemas/domain.rng src/domain_conf.[ch] src/qemu_driver.c:
  extend the generic code for the RDP and desktop extensions of
  the graphic tag needed for vbox, patch by Pritesh Kothari
Daniel

* src/domain_conf.[ch] docs/schemas/domain.rng: add support
  for internal network in the generic part of the code, and
  update the Relax-NG grammar accordingly, patch by Pritesh Kothari
daniel

* src/domain_conf.c src/domain_conf.h: parse and save multiple
  graphics elements instead of one, patch by Pritesh Kothari
* src/qemu_conf.c src/qemu_driver.c: adapt the qemu/kvm driver for
  the new structures, patch by Pritesh Kothari
* src/xend_internal.c src/xm_internal.c: same thing for Xen drivers
Daniel

* configure.in include/libvirt/virterror.h src/Makefile.am
  src/domain_conf.[ch] src/driver.h src/virterror.c src/vbox/README
  src/vbox/vbox_CAPI_v2_2.h src/vbox/vbox_V2_2.c
  src/vbox/vbox_XPCOMCGlue.[ch] src/vbox/vbox_driver.[ch]
  src/vbox/vbox_tmpl.c: integration of the VirtualBox support
  patches by Pritesh Kothari
Daniel

* docs/schemas/domain.rng src/domain_conf.c src/domain_conf.h
  src/qemu_conf.c
  tests/qemuxml2argvdata/qemuxml2argv-hostdev-pci-address.xml
  tests/qemuxml2argvdata/qemuxml2argv-hostdev-usb-address.xml
  tests/qemuxml2argvdata/qemuxml2argv-hostdev-usb-product.xml:
  adds a new <hostdev managed='(yes|no)'> property
  to host devices indicating whether or not we should
  automatically dettach/reset, patch by Mark McLoughlin
daniel

* src/domain_conf.h src/lxc_driver.c src/uml_driver.c: virDomainObj
  doesn't need stdout and stderr fields anymore, patch from
  Guido Günther
daniel

  domain shutdown and read saved vm status on libvirtd startup,
  last 2 patches from Guido Günther finishing up the surviving the
  libvirt daemon restart
daniel

* src/domain_conf.c src/domain_conf.h src/qemu_conf.c
  tests/qemuxml2argvtest.c tests/qemuxml2xmltest.c
  tests/qemuxml2argvdata/qemuxml2argv-graphics-sdl-fullscreen.args
  tests/qemuxml2argvdata/qemuxml2argv-graphics-sdl-fullscreen.xml:
  slightly modified patch for SDL fullscreen from Itamar Heim
* docs/formatdomain.html docs/formatdomain.html.in docs/libvirt.rng:
  update the schemas and docs about the sdl graphic element attributes
* AUTHORS: add Itamar Heim
Daniel

VIR_DOMAIN_XML_INACTIVE flag.