The virConnectPtr is no longer required for error reporting since
that is recorded in a thread local. Remove use of virConnectPtr
from all APIs in network_conf.{h,c} and update all callers to
match

It was used for error reporting only.

Found while trying to cross-compile libvirt on Fedora 12 for Windows.
gnulib redefines 'close' to 'close_used_without_including_unistd_h'
in sys/socket.h if winsock2.h is present and unistd.h has not been
included before sys/socket.h. Reorder some includes to fix this.

Replace free(virBufferContentAndReset()) with virBufferFreeAndReset().
Update documentation and replace all remaining calls to free() with
calls to VIR_FREE(). Also add missing calls to virBufferFreeAndReset()
and virReportOOMError() in OOM error cases.

* src/conf/network_conf.h: extend the structure to store the range
* src/conf/network_conf.c: before adding a range parse the IP addresses
  do some checking and keep the size

Rename virDomainIsActive to virDomainObjIsActive, and
virInterfaceIsActive to virInterfaceObjIsActive and finally
virNetworkIsActive to virNetworkObjIsActive.

* src/conf/domain_conf.c, src/conf/domain_conf.h,
  src/conf/interface_conf.h, src/conf/network_conf.c,
  src/conf/network_conf.h, src/lxc/lxc_driver.c,
  src/network/bridge_driver.c, src/opennebula/one_driver.c,
  src/openvz/openvz_driver.c, src/qemu/qemu_driver.c,
  src/test/test_driver.c, src/uml/uml_driver.c: Update for
  renamed APIs.

This patch adds an optional attribute to the <bootp> tag, that
allows to specify a TFTP server address other than the address of
the DHCP server itself.

This can be used to forward the BOOTP settings of the host down to the
guest.  This is something that configurations such as Xen's default
network achieve naturally, but must be done manually for NAT.

* docs/formatnetwork.html.in: Document new attribute.
* docs/schemas/network.rng: Add it to schema.
* src/conf/network_conf.h: Add it to struct.
* src/conf/network_conf.c: Add it to parser and pretty printer.
* src/network/bridge_driver.c: Put it in the dnsmasq command line.
* tests/networkxml2xmlin/netboot-proxy-network.xml
  tests/networkxml2xmlout/netboot-proxy-network.xml
  tests/networkxml2xmltest.c: add new tests

When specifying bridge delay via network XML define, we were looking for
the 'delay' attribute, but would dump the value as 'forwardDelay'. Have
the output match the expected input (and schema).

Currently, libvirtd will start a dnsmasq process for the virtual
network, but (aside from killing the dnsmasq process and replacing it),
there's no way to define tftp boot options.

This change introduces the appropriate tags to the dhcp configuration:

 <network>
   <name>default</name>
   <bridge name="virbr%d" />
   <forward/>
   <ip address="192.168.122.1" netmask="255.255.255.0">
     <tftp root="/var/lib/tftproot" />
     <dhcp>
       <range start="192.168.122.2" end="192.168.122.254" />
       <bootp file="pxeboot.img"/>
     </dhcp>
   </ip>
 </network>

When the attributes are present, these are passed to the
arguments to dnsmasq:

 dnsmasq [...] --enable-tftp --tftp-root /srv/tftp --dhcp-boot pxeboot.img
               ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ ^^^^^^^^^^^^^^^^^^^^^^^
                      from <tftp />                     from <bootp />

At present, only local tftp servers are supported (ie, dnsmasq runs as
the tftp server), but we could improve this in future by adding a
server= attribute.
Signed-off-by: NJeremy Kerr <jk@ozlabs.org>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

2009-09-21  Paolo Bonzini  <pbonzini@redhat.com>
            Jeremy Kerr  <jk@ozlabs.org>

	* docs/formatnetwork.html.in: Document new tags.
	* docs/formatnetwork.html: Regenerate.
	* docs/schemas/network.rng: Update.
	* src/network_conf.c (virNetworkDefFree): Free new fields.
	(virNetworkDHCPRangeDefParseXML): Parse <bootp>.
	(virNetworkIPParseXML): New, parsing <dhcp> and <tftp>.
	(virNetworkDefParseXML): Use virNetworkIPParseXML instead of
	virNetworkDHCPRangeDefParseXML.
	(virNetworkDefFormat): Pretty print new fields.
	* src/network_conf.h (struct _virNetworkDef): Add netboot fields.
	* src/network_driver.c (networkBuildDnsmasqArgv): Add
	TFTP and BOOTP arguments.

	* tests/Makefile.am (EXTRA_DIST): Add networkschemadata.
	* tests/networkschematest: Look in networkschemadata.
	* tests/networkschemadata/netboot-network.xml: New.

* src/capabilities.c, src/capabilities.h, src/domain_conf.c,
  src/domain_conf.h, src/domain_event.c, src/domain_event.h,
  src/interface_conf.c, src/interface_conf.h,
  src/network_conf.c, src/network_conf.h, src/node_device_conf.c,
  src/node_device_conf.h, src/secret_conf.c, src/secret_conf.h,
  src/storage_conf.c, src/storage_conf.h, src/storage_encryption_conf.c,
  src/storage_encryption_conf.h: Move to src/conf/
* src/Makefile.am: Add -Isrc/conf to the individual build targets
  which need to use XML config APIs. Remove LIBXML_CFLAGS, LIBSSH2_CFLAGS
  and SELINUX_CFLAGS from global INCLUDES and only have them in build
  targets which actually need them.  Create a libvirt_conf.la
  convenience library for all config parsers
* src/hostusb.h: Remove bogus include of domain_conf.h
* tests/Makefile.am: Add -Isrc/conf. Remove bogus -I$builddir/src
  since it never has any generated header files
* daemon/Makefile.am: Add -Isrc/conf
* proxy/Makefile.am: Add -Isrc/conf and cope with renamed files
* src/hash.c: Remove bogus include of libxml/threads.h

* src/network_conf.c (virNetworkDefParseXML): ...and its decl.

* src/domain_conf.c src/network_conf.c src/qemu_conf.c
  src/storage_backend_fs.c: various problems spotted by valgrind
  through libvirt code

by running this command:
git ls-files -z | xargs -0 perl -pi -0777 -e 's/\n\n+$/\n/'
This is in preparation for a more strict make syntax-check
rule that will detect trailing blank lines.

* docs/schemas/network.rng: fix the network schemas to match
  new accepted elements, patch by Satoru SATOH
* src/network_conf.c: fix network driver to save the domain name
  in XML if present, patch by Satoru SATOH
* AUTHORS: adding Satoru SATOH
Daniel

If two virtual networks have the same hardcoded bridge device (which
prevents them from being active simultaneously) we still want to define
them at daemon startup, so the user has a fighting chance of correcting
the XML error.

Add an extra flag to SetBridge to avoid reporting an error if there is
a bridge collision, and use this when loading network configs at startup.

This regressed via commit 4c3f3b4d.

  support, patch by Soren Hansen
* AUTHORS: add Soren
daniel

* src/uml_conf.c (VIR_FROM_THIS): Define to VIR_FROM_UML.
* src/xs_internal.c (VIR_FROM_THIS): Define to VIR_FROM_XEN.
* src/xml.c (VIR_FROM_THIS): Define to VIR_FROM_XML.
* src/stats_linux.c (VIR_FROM_THIS): Define to VIR_FROM_STATS_LINUX.
* src/datatypes.c (VIR_FROM_THIS): Define to VIR_FROM_NONE.
* src/lxc_conf.c (VIR_FROM_THIS): Define to VIR_FROM_LXC.
* src/libvirt.c (VIR_FROM_THIS): Define to VIR_FROM_NONE.
* src/node_device_conf.c (VIR_FROM_THIS): Define to VIR_FROM_NODEDEV.
* src/openvz_conf.c (VIR_FROM_THIS): Define to VIR_FROM_OPENVZ.
* src/openvz_driver.c (VIR_FROM_THIS): Define to VIR_FROM_OPENVZ.
* src/conf.c (VIR_FROM_THIS): Define to VIR_FROM_CONF.
Note: this loses config_filename:config_lineno diagnostics,
but that's ok.
* src/node_device.c (VIR_FROM_THIS): Define to VIR_FROM_NODEDEV.
* src/sexpr.c (VIR_FROM_THIS): Define to VIR_FROM_SEXPR.
* po/POTFILES.in: remove src/sexpr.c and src/lxc_conf.c

Building with --disable-nls exposed many new warnings like these:
virsh.c:4952: warning: format not a string literal and no format ...
util.c:163: warning: format not a string literal and no format arguments
All but one of the following changes add a "%s" argument before
the offending _(...) argument.

This was the only manual change:
* src/lxc_driver.c (lxcVersion): Use %s and strerror(errno)
rather than %m, to avoid a warning from gcc -Wformat-security.

Add "%s" before each warned about format-string-with-no-%-directive:
* src/domain_conf.c (virDomainHostdevSubsysUsbDefParseXML)
(virDomainDefParseString, virDomainDefParseFile):
* src/hash.c (virGetConnect, __virGetDomain, virReleaseDomain)
(__virGetNetwork, virReleaseNetwork, __virGetStoragePool)
(virReleaseStoragePool, __virGetStorageVol, virReleaseStorageVol):
* src/lxc_container.c (lxcContainerChild):
* src/lxc_driver.c (lxcDomainDefine, lxcDomainUndefine)
(lxcDomainGetInfo, lxcGetOSType, lxcDomainDumpXML)
(lxcSetupInterfaces, lxcDomainStart, lxcDomainCreateAndStart)
(lxcVersion, lxcGetSchedulerParameters):
* src/network_conf.c (virNetworkDefParseString)
(virNetworkDefParseFile):
* src/openvz_conf.c (openvzReadNetworkConf, openvzLoadDomains):
* src/openvz_driver.c (openvzDomainDefineCmd)
(openvzDomainGetInfo, openvzDomainDumpXML, openvzDomainShutdown)
(openvzDomainReboot, ADD_ARG_LIT, openvzDomainDefineXML)
(openvzDomainCreateXML, openvzDomainCreate, openvzDomainUndefine)
(openvzDomainSetAutostart, openvzDomainGetAutostart)
(openvzDomainSetVcpus):
* src/qemu_driver.c (qemudDomainBlockPeek, qemudDomainMemoryPeek):
* src/remote_internal.c (remoteDomainBlockPeek)
(remoteDomainMemoryPeek, remoteAuthPolkit):
* src/sexpr.c (sexpr_new, _string2sexpr):
* src/storage_backend_disk.c (virStorageBackendDiskMakeDataVol)
(virStorageBackendDiskCreateVol):
* src/storage_backend_fs.c
(virStorageBackendFileSystemNetFindPoolSources):
* src/storage_backend_logical.c (virStorageBackendLogicalFindLVs)
(virStorageBackendLogicalFindPoolSources):
* src/test.c (testOpenDefault, testOpenFromFile, testOpen)
(testGetDomainInfo, testDomainRestore)
(testNodeGetCellsFreeMemory):
* src/util.c (virExec):
* src/virsh.c (cmdAttachDevice, cmdDetachDevice)
(cmdAttachInterface, cmdDetachInterface, cmdAttachDisk)
(cmdDetachDisk, cmdEdit):
* src/xend_internal.c (do_connect, wr_sync, xend_op_ext)
(urlencode, xenDaemonDomainCreateXML)
(xenDaemonDomainLookupByName_ids, xenDaemonDomainLookupByID)
(xenDaemonParseSxprOS, xend_parse_sexp_desc_char)
(xenDaemonParseSxprChar, xenDaemonParseSxprDisks)
(xenDaemonParseSxpr, sexpr_to_xend_topology, sexpr_to_domain)
(xenDaemonDomainFetch, xenDaemonDomainGetAutostart)
(xenDaemonDomainSetAutostart, xenDaemonDomainMigratePerform)
(xenDaemonDomainDefineXML, xenDaemonGetSchedulerType)
(xenDaemonGetSchedulerParameters)
(xenDaemonSetSchedulerParameters, xenDaemonDomainBlockPeek)
(xenDaemonFormatSxprChr, virDomainXMLDevID):
* src/xm_internal.c (xenXMConfigCacheRefresh, xenXMDomainPinVcpu)
(xenXMDomainCreate, xenXMDomainDefineXML)
(xenXMDomainAttachDevice, xenXMDomainDetachDevice):
* src/xml.c (virXPathString, virXPathNumber, virXPathLong)
(virXPathULong, virXPathBoolean, virXPathNode, virXPathNodeSet):
* src/xs_internal.c (xenStoreOpen):

* src/network_conf.c src/network_conf.h src/qemu_driver.c: add
  support for a domain name in network configurations, patch by
  JJ Reynolds with bugfix raised by Dan
* src/openvz_conf.c: fix to small bug in openvzReadConfigParam
  by Evgeniy Sokolov
Daniel

  add static host definition for dnsmasq
Daniel

Use inet_pton instead; pull in gnulib's module by the same name.
* src/network_conf.c (virNetworkDefParseXML): Use inet_pton,
rather than inet_aton.
* bootstrap (modules): Add inet_pton.
* gnulib/lib/inet_pton.c: New file, from gnulib.

	* src/domain_conf.c, src/network_conf.c, src/storage_conf.c:
	  Improve error messages from commands such as 'virsh define'
	  when the XML is not well-formed by passing libxml2 errors
	  back out through virterror.