There's no reason for the files to have qemuxml2xmlout- prefix
since they all live under qemuxml2xmloutdata directory.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NPavel Hrdina <phrdina@redhat.com>

This attribute was used to decide whether to format the type
attribute of the <target> element, but the logic didn't take into
account all possible cases and as such could lead to unexpected
results. Moreover, it's one more thing to keep track of, and can
easily fall out of sync with other attributes.

Now that we have VIR_DOMAIN_CHR_SERIAL_TARGET_TYPE_NONE, we can
use that value to signal that no specific target type has been
configured for the serial device and as such the attribute should
not be formatted at all. All other values are now formatted.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NPavel Hrdina <phrdina@redhat.com>

Our test data used a lot of different qemu binary paths and some
of them were based on downstream systems.

Note that there is one file where I had to add "accel=kvm" because
the qemuargv2xml code parses "/usr/bin/kvm" as virt type="kvm".
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

We use the PreFormat callback for this. Many test cases need to be extended
to pass in proper qemuCaps flags so AssignAddresses doesn't throw errors.

One test case (pcie-root-port-too-many) is dropped, since it was meant
only for checking an error condition in qemuxml2argv, and one we add in
AssignAddresses it errors here too.

Long term I think AssignAddresses should be handled in qemu's PostParse
callback, but that's not entirely straightforward. Handling it here
means we can get the test suite churn over with.

Most qemuxml2xml tests expect that the input XML is unchanged after
parsing. This is unlike 99% of new qemu configs in the wild, which after
initial parsing end up with stable PCI device addresses. The xml2xml bit
doesn't currently hit that code path though, so most XML testing indeed
does not change.

Future patches will add that PCI address bits, which means most test cases
will have different output. So let's do away with the hardcoded same vs
different test split, and always track a separate output file. Tests can
still have same input and output, it just necessitates 2 separate XML files.

The current code was a little bit odd.  At first we've removed all
possible implicit input devices from domain definition to add them later
back if there was any graphics device defined while parsing XML
description.  That's not all, while formating domain definition to XML
description we at first ignore any input devices with bus different to
USB and VIRTIO and few lines later we add implicit input devices to XML.

This seems to me as a lot of code for nothing.  This patch may look
to be more complicated than original approach, but this is a preferred
way to modify/add driver specific stuff only in those drivers and not
deal with them in common parsing/formating functions.

The update is to add those implicit input devices into config XML to
follow the real HW configuration visible by guest OS.

There was also inconsistence between our behavior and QEMU's in the way,
that in QEMU there is no way how to disable those implicit input devices
for x86 architecture and they are available always, even without graphics
device.  This applies also to XEN hypervisor.  VZ driver already does its
part by putting correct implicit devices into live XML.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

In commit edd1295e I've introduced an
XML element that allows to configure state of the network interface
link. Somehow the RNG schema hunk ended up in a weird place in the
network schema definition. Move it to the right place and add a test
case.

Note that the link state is set up via the monitor at VM startup so I
originally didn't think of adding a test case.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1173468

https://bugzilla.redhat.com/show_bug.cgi?id=1128751

There's this <driver/> element under <interface/> which can have
several attributes. However, the driver element is currently formated
only if the driver's name or txmode has been specified. This makes
only a little sense as we parse even partial <driver/>, for instance:

    <interface type='user'>
      <mac address='52:54:00:e5:48:58'/>
      <model type='virtio'/>
      <driver ioeventfd='on' event_idx='on' queues='5'/>
    </interface>

But such XML would never get formatted back.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

<controller type='pci' index='0' model='pci-root'/>
is auto-added to pc* machine types.
Without this controller PCI bus 0 is not available and
no PCI addresses are assigned by default.

Since older libvirt supported PCI bus 0 even without
this controller, it is removed from the XML when migrating.

Several tests assume that VNC is always available and include it in
their configs and the expected command line. The tests have nothing to
do with graphics display so they shouldn't rely on VNC.

<vcpu> is not an optional node. The value for its 'placement'
actually always defaults to 'static' in the underlying codes.
(Even no 'cpuset' and 'placement' is specified, the domain
process will be pinned to all the available pCPUs).

Make it obvious to 'dumpxml' readers what unit we are using,
since our default of KiB for memory (1024) differs from qemu's
default of MiB; and differs from our use of bytes for storage.

Tests were updated via:

$ find tests/*data tests/*out -name '*.xml' | \
  xargs sed -i 's/<\(memory\|currentMemory\|hard_limit\|soft_limit\|min_guarantee\|swap_hard_limit\)>/<\1 unit='"'KiB'>/"
$ find tests/*data tests/*out -name '*.xml' | \
  xargs sed -i 's/<\(capacity\|allocation\|available\)>/<\1 unit='"'bytes'>/"

followed by a few fixes for the stragglers.

Note that with this patch, the RNG for <memory> still forbids
validation of anything except unit='KiB', since the code silently
ignores the attribute; a later patch will expand <memory> to allow
scaled input in the code and update the RNG to match.

* docs/schemas/basictypes.rng (unit): Add 'bytes'.
(scaledInteger): New define.
* docs/schemas/storagevol.rng (sizing): Use it.
* docs/schemas/storagepool.rng (sizing): Likewise.
* docs/schemas/domaincommon.rng (memoryKBElement): New define; use
for memory elements.
* src/conf/storage_conf.c (virStoragePoolDefFormat)
(virStorageVolDefFormat): Likewise.
* src/conf/domain_conf.h (_virDomainDef): Document unit used
internally.
* src/conf/storage_conf.h (_virStoragePoolDef, _virStorageVolDef):
Likewise.
* tests/*data/*.xml: Update all tests.
* tests/*out/*.xml: Likewise.
* tests/define-dev-segfault: Likewise.
* tests/openvzutilstest.c (testReadNetworkConf): Likewise.
* tests/qemuargv2xmltest.c (blankProblemElements): Likewise.

* src/conf/domain_conf.h: Add new member "target" to struct
  _virDomainDeviceDriveAddress.

* src/conf/domain_conf.c: Parse and format "target"

* Lots of tests (.xml) in tests/domainsnapshotxml2xmlout,
  tests/qemuxml2argvdata, tests/qemuxml2xmloutdata, and
  tests/vmx2xmldata/ are modified for newly introduced
  attribute "target" for address of "drive" type.

Some tools, such as virt-manager, prefers having the default USB
controller explicit in the XML document. This patch makes sure there
is one. With this patch, it is now possible to switch from USB1 to
USB2 from the release 0.9.1 of virt-manager.

Fix tests to pass with this change.

In some versions of qemu, both virtio-blk-pci and virtio-net-pci
devices can have an event_idx setting that determines some details of
event processing. When it is enabled, it "reduces the number of
interrupts and exits for the guest". qemu will automatically enable
this feature when it is available, but there may be cases where this
new feature could actually make performance worse (NB: no such case
has been found so far).

As a safety switch in case such a situation is encountered in the
field, this patch adds a new attribute "event_idx" to the <driver>
element of both disk and interface devices. event_idx can be set to
"on" (to force event_idx on in case qemu has it disabled by default)
or "off" (for force event_idx off). In the case that event_idx support
isn't present in qemu, the attribute is ignored (this on the advice of
the qemu developer).

docs/formatdomain.html.in: document the new flag (marking it as
   "don't mess with this!"
docs/schemas/domain.rng: add event_idx in appropriate places
src/conf/domain_conf.[ch]: add event_idx to parser and formatter
src/libvirt_private.syms: export
   virDomainVirtioEventIdx(From|To)String
src/qemu/qemu_capabilities.[ch]: detect and report event_idx in
   disk/net
src/qemu/qemu_command.c: add event_idx parameter to qemu commandline
    when appropriate.
tests/qemuxml2argvdata/qemuxml2argv-event_idx.args,
tests/qemuxml2argvdata/qemuxml2argv-event_idx.xml,
tests/qemuxml2argvtest.c,
tests/qemuxml2xmltest.c: test cases for event_idx.

For virtio disks and interfaces, qemu allows users to enable or disable
ioeventfd feature. This means, qemu can execute domain code, while
another thread waits for I/O event. Basically, in some cases it is win,
in some loss. This feature is available via 'ioeventfd' attribute in disk
and interface <driver> element. It accepts 'on' and 'off'. Leaving this
attribute out defaults to hypervisor decision.