- 05 12月, 2017 1 次提交
-
-
由 Michal Privoznik 提交于
There's no reason for the files to have qemuxml2xmlout- prefix since they all live under qemuxml2xmloutdata directory. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
- 11 4月, 2017 1 次提交
-
-
由 Pavel Hrdina 提交于
Our test data used a lot of different qemu binary paths and some of them were based on downstream systems. Note that there is one file where I had to add "accel=kvm" because the qemuargv2xml code parses "/usr/bin/kvm" as virt type="kvm". Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
-
- 22 6月, 2016 1 次提交
-
-
由 John Ferlan 提交于
Make them work again... The xml2xml had been working, but the xml2argv were not working. Making the xml2argv work required a few adjustments to the xml to update to more recent times. Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
-
- 10 2月, 2016 1 次提交
-
-
由 Cole Robinson 提交于
We use the PreFormat callback for this. Many test cases need to be extended to pass in proper qemuCaps flags so AssignAddresses doesn't throw errors. One test case (pcie-root-port-too-many) is dropped, since it was meant only for checking an error condition in qemuxml2argv, and one we add in AssignAddresses it errors here too. Long term I think AssignAddresses should be handled in qemu's PostParse callback, but that's not entirely straightforward. Handling it here means we can get the test suite churn over with.
-
- 09 2月, 2016 1 次提交
-
-
由 Cole Robinson 提交于
Most qemuxml2xml tests expect that the input XML is unchanged after parsing. This is unlike 99% of new qemu configs in the wild, which after initial parsing end up with stable PCI device addresses. The xml2xml bit doesn't currently hit that code path though, so most XML testing indeed does not change. Future patches will add that PCI address bits, which means most test cases will have different output. So let's do away with the hardcoded same vs different test split, and always track a separate output file. Tests can still have same input and output, it just necessitates 2 separate XML files.
-
- 27 1月, 2016 1 次提交
-
-
由 Pavel Hrdina 提交于
The current code was a little bit odd. At first we've removed all possible implicit input devices from domain definition to add them later back if there was any graphics device defined while parsing XML description. That's not all, while formating domain definition to XML description we at first ignore any input devices with bus different to USB and VIRTIO and few lines later we add implicit input devices to XML. This seems to me as a lot of code for nothing. This patch may look to be more complicated than original approach, but this is a preferred way to modify/add driver specific stuff only in those drivers and not deal with them in common parsing/formating functions. The update is to add those implicit input devices into config XML to follow the real HW configuration visible by guest OS. There was also inconsistence between our behavior and QEMU's in the way, that in QEMU there is no way how to disable those implicit input devices for x86 architecture and they are available always, even without graphics device. This applies also to XEN hypervisor. VZ driver already does its part by putting correct implicit devices into live XML. Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
-
- 25 4月, 2013 1 次提交
-
-
由 Ján Tomko 提交于
<controller type='pci' index='0' model='pci-root'/> is auto-added to pc* machine types. Without this controller PCI bus 0 is not available and no PCI addresses are assigned by default. Since older libvirt supported PCI bus 0 even without this controller, it is removed from the XML when migrating.
-
- 09 5月, 2012 1 次提交
-
-
由 Osier Yang 提交于
<vcpu> is not an optional node. The value for its 'placement' actually always defaults to 'static' in the underlying codes. (Even no 'cpuset' and 'placement' is specified, the domain process will be pinned to all the available pCPUs).
-
- 08 3月, 2012 1 次提交
-
-
由 Eric Blake 提交于
Make it obvious to 'dumpxml' readers what unit we are using, since our default of KiB for memory (1024) differs from qemu's default of MiB; and differs from our use of bytes for storage. Tests were updated via: $ find tests/*data tests/*out -name '*.xml' | \ xargs sed -i 's/<\(memory\|currentMemory\|hard_limit\|soft_limit\|min_guarantee\|swap_hard_limit\)>/<\1 unit='"'KiB'>/" $ find tests/*data tests/*out -name '*.xml' | \ xargs sed -i 's/<\(capacity\|allocation\|available\)>/<\1 unit='"'bytes'>/" followed by a few fixes for the stragglers. Note that with this patch, the RNG for <memory> still forbids validation of anything except unit='KiB', since the code silently ignores the attribute; a later patch will expand <memory> to allow scaled input in the code and update the RNG to match. * docs/schemas/basictypes.rng (unit): Add 'bytes'. (scaledInteger): New define. * docs/schemas/storagevol.rng (sizing): Use it. * docs/schemas/storagepool.rng (sizing): Likewise. * docs/schemas/domaincommon.rng (memoryKBElement): New define; use for memory elements. * src/conf/storage_conf.c (virStoragePoolDefFormat) (virStorageVolDefFormat): Likewise. * src/conf/domain_conf.h (_virDomainDef): Document unit used internally. * src/conf/storage_conf.h (_virStoragePoolDef, _virStorageVolDef): Likewise. * tests/*data/*.xml: Update all tests. * tests/*out/*.xml: Likewise. * tests/define-dev-segfault: Likewise. * tests/openvzutilstest.c (testReadNetworkConf): Likewise. * tests/qemuargv2xmltest.c (blankProblemElements): Likewise.
-
- 10 2月, 2012 1 次提交
-
-
由 Marc-André Lureau 提交于
Some tools, such as virt-manager, prefers having the default USB controller explicit in the XML document. This patch makes sure there is one. With this patch, it is now possible to switch from USB1 to USB2 from the release 0.9.1 of virt-manager. Fix tests to pass with this change.
-
- 10 12月, 2011 1 次提交
-
-
由 Laine Stump 提交于
One of the xml tests in the test suite was created using a now-deprecated qemu machine type ("fedora-13", which was only ever valid for Fedora builds of qemu). Although strictly speaking it's not necessary to replace it with an actual supported qemu machine type (since the xml in question is never actually sent to qemu), this patch changes it to the actually-supported "pc-0.13" just for general tidiness. (Also, on some Fedora builds which contain a special patch to rid the world of "fedora-13", having it mentioned in the test suite will cause make check to fail.)
-
- 21 7月, 2010 1 次提交
-
-
由 Daniel P. Berrange 提交于
To allow compatibility with older QEMU PCI device slot assignment it is necessary to explicitly track the balloon device in the XML. This introduces a new device <memballoon model='virtio|xen'/> It can also have a PCI address, auto-assigned if necessary. The memballoon will be automatically added to all Xen and QEMU guests by default. * docs/schemas/domain.rng: Add <memballoon> element * src/conf/domain_conf.c, src/conf/domain_conf.h: parsing and formatting for memballoon device. Always add a memory balloon device to Xen/QEMU if none exists in XML * src/libvirt_private.syms: Export memballoon model APIs * src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Honour the PCI device address in memory balloon device * tests/*: Update to test new functionality
-
- 27 4月, 2010 1 次提交
-
-
由 David Allan 提交于
* virStorageEncryptionFormat is called from both virDomainDiskDefFormat and virStorageVolTargetDefFormat. The proper indentation in the generated XML depends on the caller. My earlier patch to fix the incorrect indentation for the domain XML broke the indentation for the storage XML. This patch adopts Laine's suggestion of requring the caller of virStorageEncryptionFormat to provide an unsigned int with the number of spaces the output should be indented. The patch modifies both callers to provide the additional argument. * Add a regression test for the domain XML * src/conf/domain_conf.c src/conf/storage_conf.c src/conf/storage_encryption_conf.c src/conf/storage_encryption_conf.h: change the indentation code * tests/qemuxml2xmltest.c tests/qemuxml2argvdata/qemuxml2argv-encrypted-disk.args tests/qemuxml2argvdata/qemuxml2argv-encrypted-disk.xml: add a regression test
-