You need to sign in or sign up before continuing.
- 26 5月, 2016 3 次提交
-
-
由 Laine Stump 提交于
Hand-entering indexes for 20 PCI controllers is not as tedious as manually determining and entering their PCI addresses, but it's still annoying, and the algorithm for determining the proper index is incredibly simple (in all cases except one) - just pick the lowest unused index. The one exception is USB2 controllers because multiple controllers in the same group have the same index. For these we look to see if 1) the most recently added USB controller is also a USB2 controller, and 2) the group *that* controller belongs to doesn't yet have a controller of the exact model we're just now adding - if both are true, the new controller gets the same index, but in all other cases we just assign the lowest unused index. With this patch in place and combined with the automatic PCI address assignment, we can define a PCIe switch with several ports like this: <controller type='pci' model='pcie-root-port'/> <controller type='pci' model='pcie-switch-upstream-port'/> <controller type='pci' model='pcie-switch-downstream-port'/> <controller type='pci' model='pcie-switch-downstream-port'/> <controller type='pci' model='pcie-switch-downstream-port'/> <controller type='pci' model='pcie-switch-downstream-port'/> <controller type='pci' model='pcie-switch-downstream-port'/> ... These will each get a unique index, and PCI addresses that connect them together appropriately with no pesky numbers required.
-
由 Laine Stump 提交于
Make virDomainControllerFindUnusedIndex() a global function so that it can be used outside domain_conf.c (as well as higher up in domain_conf.c itself)/ Also make its DomainDef arg a const* so that functions which only have a const* to the domain can use it.
-
由 Laine Stump 提交于
IS_USB2_CONTROLLER() is useful in more places aside from just when assigning PCI addresses in QEMU, and is checking for enum values that are all defined in conf/domain_conf.h anyway, so define it there instead.
-
- 25 5月, 2016 37 次提交
-
-
由 Chunyan Liu 提交于
Add .domainInterfaceAddresses so that user can have a way to get domain interface address by 'virsh domifaddr'. Currently it only supports '--source lease'. Signed-off: Chunyan Liu <cyliu@suse.com>
-
由 Ján Tomko 提交于
Add support for the slic_table to the security drivers.
-
由 Ján Tomko 提交于
<os> <acpi> <table type="slic">/path/to/acpi/table/file</table> </acpi> </os> will result in: -acpitable sig=SLIC,file=/path/to/acpi/table/file This option was introduced by QEMU commit 8a92ea2 in 2009. https://bugzilla.redhat.com/show_bug.cgi?id=1327537
-
由 Ján Tomko 提交于
Add a new element to <domain> XML: <os> <acpi> <table type="slic">/path/to/acpi/table/file</table> </acpi> </os> To supply a path to a SLIC (Software Licensing) ACPI table blob. https://bugzilla.redhat.com/show_bug.cgi?id=1327537
-
由 Pavel Hrdina 提交于
The qemu-1.6.50 is a beta before the new minor version, let's replace it with the release qemu-1.7.0. Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
-
由 Peter Krempa 提交于
This refactor also makes a distinction between the pointer to the original definition and copied one to prevent mixups.
-
由 Peter Krempa 提交于
-
由 Peter Krempa 提交于
Use virDomainCputune struct to store the data rather than exploding the fields and use macros to fill the typed params.
-
由 Peter Krempa 提交于
cgroup functions set and get the longer type so use it everywhere
-
由 Peter Krempa 提交于
-
由 Peter Krempa 提交于
Get rid of lots of duplicated code.
-
由 Peter Krempa 提交于
-
由 Peter Krempa 提交于
-
由 Peter Krempa 提交于
Introduce a macro to assign the parameters to avoid the for loop and shuffle around various checks for a simpler and saner function.
-
由 Peter Krempa 提交于
Use virDomainObjGetDefs since the API guarantees that both live and config are never set together.
-
由 Peter Krempa 提交于
The caller is already aware that the params are missing and the extractor is ignoring the missing ones so the parameter isn't necessary.
-
由 Dawid Zamirski 提交于
ESX will refuse to attach VMDKS that have buslogic adatper type to 64bit VMs whereas lsilogic works fine both 32bit and 64bit VMs.
-
由 Jim Fehlig 提交于
Xen only supports network-based disks with the qemu (aka qdisk) driver. Set the driverName to 'qemu' in libxlDomainDeviceDefPostParse() if not already set. When starting a domain with network-based disks, ensure the driverName is 'qemu'. Resolves: https://bugzilla.opensuse.org/show_bug.cgi?id=981094
-
由 Peter Krempa 提交于
The libvirt internal bits can be changed for disks that don't otherwise support changing media. Remove the switch statement and allow changes of non-source data for all disks.
-
由 Peter Krempa 提交于
qemuDomainChangeDiskLive rolled back few changes to the disk definition if changing of the media failed. This can be avoided by moving some code around.
-
由 Shivaprasad G Bhat 提交于
Signed-off-by: NShivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
-
由 Shivaprasad G Bhat 提交于
Signed-off-by: NShivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
-
由 John Ferlan 提交于
Commit id '15ccb0db' added job functions for the lxc driver; however, for shutdown and nonpersistent path, the vm was removed from the domain object list and the vm pointer cleared before the endjob. Adjust the code to perform the endjob first and then perform the ObjListRemove as long as the vm wasn't NULL. This follows more closely models from qemu and libxl Found by Coverity (FORWARD_NULL)
-
由 John Ferlan 提交于
Based on some digital archaeology performed by jtomko, it's been determined that the persistentAddrs variable is no longer necessary... The variable was added by: commit 141dea6b CommitDate: 2010-02-12 17:25:52 +0000 Add persistence of PCI addresses to QEMU Where it was set to 0 on domain startup if qemu did not support the QEMUD_CMD_FLAG_DEVICE capability, to clear the addresses at shutdown, because QEMU might make up different ones next time. As of commit f5dd58a6 CommitDate: 2012-07-11 11:19:05 +0200 qemu: Extended qemuDomainAssignAddresses to be callable from everywhere. this was broken, when the persistentAddrs = 0 assignment was moved inside qemuDomainAssignPCIAddresses and while it pretends to check for !QEMU_CAPS_DEVICE, its parent qemuDomainAssignAddresses is only called if QEMU_CAPS_DEVICE is present.
-
由 John Ferlan 提交于
Since commit id '20a0fa8e' removed the QEMU_CAPS_DEVICE, Coverity notes that it's no longer possible to have 'addrs' be NULL when checking for a live domain since qemuDomainPCIAddressSetCreate would have jumped to cleanup if addrs was NULL.
-
由 Andrea Bolognani 提交于
Instead of setting the flag before parsing the PCI address, set it afterwards. This ensure we can never end up in a situation where the flag has been set but pci_dev.physical_function has not been filled in.
-
由 Andrea Bolognani 提交于
Commit c8b1a836 changed the function, making it impossible for callers to be able to tell whether a non-negative return value means "physical function address found and parsed correctly" or "couldn't find corresponding physical function". The important difference between the two being that, in the latter case, the returned pointer is NULL and should never, ever be dereferenced. In order to cope with these changes, the callers have to be updated.
-
由 Andrea Bolognani 提交于
-
由 Andrea Bolognani 提交于
Just an extra precaution in case the function returns early due to an OOM error.
-
由 Peter Krempa 提交于
Use the detected tray presence flag to trigger the tray waiting code only if the given storage device in qemu reports to have a tray. This is necessary as the floppy device lost it's tray as of qemu commit: commit abb3e55b5b718d6392441f56ba0729a62105ac56 Author: Max Reitz <mreitz@redhat.com> Date: Fri Jan 29 20:49:12 2016 +0100 Revert "hw/block/fdc: Implement tray status"
-
由 Peter Krempa 提交于
Commit 1fad65d4 used a really big hammer and overwrote the error message that might be reported by qemu if the tray is locked. Fix it by reporting the error only if no error is currently set. Error after commit mentioned above: error: internal error: timed out waiting for disk tray status update New error: error: internal error: unable to execute QEMU command 'eject': Tray of device 'drive-ide0-0-0' is not open
-
由 Peter Krempa 提交于
The code grew rather convoluted. Extract it to a separate function.
-
由 Peter Krempa 提交于
Extract information for all disks and update tray state and source only for removable drives. Additionally store whether a drive is removable and whether it has a tray.
-
由 Peter Krempa 提交于
Move it to a more sane place since it's refreshing data about disks.
-
由 Peter Krempa 提交于
Extract whether a given drive has a tray and whether there is no image inserted. Negative logic for the image insertion is chosen so that the flag is set only if we are certain of the fact.
-
由 Peter Krempa 提交于
-
由 Joao Martins 提交于
When reviewing libxl vif typename series[0] I found a bug on xen-xm formatter where "virsh domxml-to-native xen-xm file.xml" can lead to a NULL dereference if the disk driver isn't specified. Fix this by checking for driver before writing/testing it down. [0] https://www.redhat.com/archives/libvir-list/2016-April/msg01434.htmlSigned-off-by: NJoao Martins <joao.m.martins@oracle.com>
-