Both qemu monitor and agent print the same
log on HUANGUP event, which would be confusing
when reading libvirtd log.

This patch will give a different log message to them.
Signed-off-by: NChen Hanxiao <chenhanxiao@gmail.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

The layout in $HOME/.pki is different from that in /etc/pki
but we never tell anyone about this trap. Add docs showing
the required $HOME/.pki layout.

This way we'll be able to hotplug with both --live and --config in one
API call.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

It already is used and tests will be automatically added in later patches.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Most of QEMU's PCI display device models, such as:

  libvirt video/model/@type  QEMU -device
  -------------------------  ------------
  cirrus                     cirrus-vga
  vga                        VGA
  qxl                        qxl-vga
  virtio                     virtio-vga

come with a linear framebuffer (sometimes called "VGA compatibility
framebuffer"). This linear framebuffer lives in one of the PCI device's
MMIO BARs, and allows guest code (primarily: firmware drivers, and
non-accelerated OS drivers) to display graphics with direct memory access.

Due to architectural reasons on aarch64/KVM hosts, this kind of
framebuffer doesn't / can't work in

  qemu-system-(arm|aarch64) -M virt

machines. Cache coherency issues guarantee a corrupted / unusable display.
The problem has been researched by several people, including kvm-arm
maintainers, and it's been decided that the best way (practically the only
way) to have boot time graphics for such guests is to consolidate on
QEMU's "virtio-gpu-pci" device.

>From <https://bugzilla.redhat.com/show_bug.cgi?id=1195176>, libvirt
supports

  <devices>
    <video>
      <model type='virtio'/>
    </video>
  </devices>

but libvirt unconditionally maps @type='virtio' to QEMU's "virtio-vga"
device model. (See the qemuBuildDeviceVideoStr() function and the
"qemuDeviceVideo" enum impl.)

According to the above, this is not right for the "virt" machine type; the
qemu-system-(arm|aarch64) binaries don't even recognize the "virtio-vga"
device model (justifiedly). Whereas "virtio-gpu-pci", which is a pure
virtio device without a compatibility framebuffer, is available, and works
fine.

(The ArmVirtQemu ("AAVMF") platform of edk2 -- that is, the UEFI firmware
for "virt" -- supports "virtio-gpu-pci", as of upstream commit
3ef3209d3028. See
<https://tianocore.acgmultimedia.com/show_bug.cgi?id=66>.)

Override the default mapping of "virtio", from "virtio-vga" to
"virtio-gpu-pci", if qemuDomainMachineIsVirt() evaluates to true.

Cc: Andrea Bolognani <abologna@redhat.com>
Cc: Drew Jones <drjones@redhat.com>
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: Martin Kletzander <mkletzan@redhat.com>
Suggested-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1372901Signed-off-by: NLaszlo Ersek <lersek@redhat.com>
Acked-by: NMartin Kletzander <mkletzan@redhat.com>

There is nothing Linux-specific in that function.  Also since commit
8c3b5bf4 mingw build is broken due to
the fact that this function is not compiled in the library.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Signed-off-by: NTomáš Ryšavý <tom.rysavy.0@gmail.com>

Signed-off-by: NTomáš Ryšavý <tom.rysavy.0@gmail.com>

Signed-off-by: NTomáš Ryšavý <tom.rysavy.0@gmail.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Signed-off-by: NTomáš Ryšavý <tom.rysavy.0@gmail.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Signed-off-by: NTomáš Ryšavý <tom.rysavy.0@gmail.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Signed-off-by: NTomáš Ryšavý <tom.rysavy.0@gmail.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

In testOpenDefault we create a virtual computer that is later
presented to user. We also pretend to have NUMA cells and
initialize them somehow. But whilst doing so a magical constant
is used. Drop it.
Signed-off-by: NTomáš Ryšavý <tom.rysavy.0@gmail.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

We will need this function shortly when implementing
nodeGetCPUStats in the test driver.
Signed-off-by: NTomáš Ryšavý <tom.rysavy.0@gmail.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

virsh maxvcpus --type kvm output is useless on PPC. Also, in
commit e6806d79 we documented not rely on virConnectGetMaxVcpus
output. Fix the  maxvcpus to use virConnectGetDomainCapabilities
now to make it useful. The call is made to use the default emulator
binary and to check for the host machine and arch which is what the
command intends to show anyway.
Signed-off-by: NShivaprasad G Bhat <sbhat@linux.vnet.ibm.com>

Commit ca329299 added function
virTestCompareToFile(), but forgot to use a fixedcontent value for the
actual comparison.  That lead to VIR_TEST_DEBUG=1 showing (for some
tests) all the actual output from the first error to the end of the
string due to the difference being an endline in the end.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Just like we are running 'virsh self-test' from within our test
suite, we should run 'virt-admin self-test' too.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

This command should be exposed to other shells of ours.
They are gonna need it as soon as we want to test them too.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Use the state information (online, hotpluggable) provided by the monitor
code rather than trying to infer it. This fixes an issue where on
architectures that require hotplug of multiple threads at once the
sub-cores would get updated as offline on daemon restart thus creating
an invalid configuration.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1375783

Return whether a vcpu entry is hotpluggable or online so that upper
layers don't have to infer the information from other data.

Advantage is that this code can be tested by unit tests.

Add separate iterator for iterating all the entries

The algorithm that matches data from query-cpus and
query-hotpluggable-cpus is quite complex. Start using descriptive
iterator names to avoid confusion.

https://bugzilla.redhat.com/show_bug.cgi?id=1372613

Apparently, some management applications use the following code
pattern when waiting for a block job to finish:

  while (1) {
    virDomainGetBlockJobInfo(dom, disk, info, flags);

    if (info.cur == info.end)
        break;

    sleep(1);
  }

Problem with this approach is in its corner cases. In case of
QEMU, libvirt merely pass what has been reported on the monitor.
However, if the block job hasn't started yet, qemu reports cur ==
end == 0 which tricks mgmt apps into thinking job is complete.

The solution is to mangle cur/end values as described here [1].

1: https://www.redhat.com/archives/libvir-list/2016-September/msg00017.htmlSigned-off-by: NMichal Privoznik <mprivozn@redhat.com>

Even though we merely just pass to users whatever qemu provided
on the monitor, we still do some translation. For instance we
turn bytes into mebibytes, or fix job type if needed. However, in
the future there is more fixing to be done so this code deserves
its own function.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

The test qemuxml2argv-serial-tcp-tlsx509-chardev.args
will fail if libvirt is built with a --sysconfdir
arg that is not /etc.  Fix this by setting a hardcoded
path in the test code.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Name it virNumaGetHostMemoryNodeset and return only NUMA nodes which
have memory installed. This is necessary as the kernel is not very happy
to set the memory cgroup setting for nodes which do not have any memory.

This would break vcpu hotplug with following message on such
configruation:

  Invalid value '0,8' for 'cpuset.mems': Invalid argument

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1375268

The code guarantees that virBitmapSetBit won't be called with out of
range values. Just ignore the return value and remove dead error
handling.

Thing is, in f3f15cc2 I'm trying to adapt libvirt to the newest
glibc where major()/minor()/makedev() are moved from sys/types.h
to sys/sysmacros.h. However, my commit back then expect autoconf
to be fixed too as we already use AC_HEADER_MAJOR to determine
which header file the functions are in, but because the header
files just trigger a warning and not a compile error, the
autoconf macro detects the bad header file.

This is just a workaround until autoconf macro is fixed.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

The virsh-self-test script compared the test's return code with 1 and only if
the return code matched this value then the test was marked as failed. Problem
is that SIGSEGV returns 139 (or 11 to be precise, since shell reserves the MSB
for abnormal exit signaling) which passes the check just fine and test then
appears as successful which it most certainly wasn't.
Therefore, flip the logic to compare against 0 instead and every other result
will be treated as a failed test case.
Signed-off-by: NErik Skultety <eskultet@redhat.com>

Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>

Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>

This flags specifies to keep nvram file if it is existed for inactive
domains.
Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>

In a full domain config, libvirt allows overriding the normal PCI
vs. PCI Express rules when a device address is explicitly provided
(so, e.g., you can force a legacy PCI device to plug into a PCIe port,
although libvirt would never do that on its own). However, due to a
bug libvirt doesn't give this same leeway when hotplugging devices. On
top of that, current libvirt assumes that *all* devices are legacy
PCI. The result of all this is that it's impossible to hotplug a
device into a PCIe port, even if you manually add the PCI address.

This can all be traced to the function
virDomainPCIAddressEnsureAddr(), and the fact that it calls
virDomainPCIaddressReserveSlot() for manually set addresses, and that
function hardcodes the argument "fromConfig" to false (meaning "this
address was auto-assigned, so it should be subject to stricter
validation").

Since virDomainPCIAddressReserveSlot() is just a one line simple
wrapper around virDomainPCIAddressReserveAddr() (adding in a hardcoded
reserveEntireSlot = true and fromConfig = false), all that's needed to
solve the problem with no unwanted side effects is to replace that
call for virDomainPCIAddressReserveSlot() with a direct call to
virDomainPCIAddressReserveAddr(), but with reserveEntireSlot = true,
fromConfig = true. That's what this patch does.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1337490

virQEMUDriverConfigNew() always initializes the bitmap in its
cgroupControllers member to -1 (i.e. all 1's).

Prior to commit a9331394, if qemu.conf had a line with
"cgroup_controllers", cgroupControllers would get reset to 0 before
going through a loop setting a bit for each named cgroup controller.
commit a9331394 left out the "reset to 0" part, so cgroupControllers
would always be -1; if you didn't want a controller included, there
was no longer a way to make that happen.

This was discovered by users who were using qemu commandline
passthrough to use the "input-linux" method of directing
keyboard/mouse input to a virtual machine:

 https://www.redhat.com/archives/vfio-users/2016-April/msg00105.html

Here's the first report I found of the problem encountered after
upgrading libvirt beyond v2.0.0:

 https://www.redhat.com/archives/vfio-users/2016-August/msg00053.html

Thanks to sL1pKn07 SpinFlo <sl1pkn07@gmail.com> for bringing the
problem up in IRC, and then taking the time to do a git bisect and
find the patch that started the problem.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1218603Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

previous commit:

  commit 2c322378
  Author: John Ferlan <jferlan@redhat.com>
  Date:   Mon Jun 13 12:30:34 2016 -0400

    qemu: Add the ability to hotplug the TLS X.509 environment

added a parameter "bool listen" in some methods. This
unfortunately clashes with the listen() method, causing
compile failures on certain platforms (RHEL-6 for example)
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Commit id 'a48c7141' altered how to determine if a volume was encrypted
by adding a peek at an offset into the file at a specific buffer location.
Unfortunately, all that was compared was the first "char" of the buffer
against the expect "int" value.

Restore the virReadBufInt32BE to get the complete field in order to
compare against the expected value from the qcow2EncryptionInfo or
qcow1EncryptionInfo "modeValue" field.

This restores the capability to create a volume with encryption, then
refresh the pool, and still find the encryption for the volume.