- 20 1月, 2010 1 次提交
-
-
由 Jiri Denemark 提交于
I noticed some debug messages are printed with an empty lines after them. This patch removes these empty lines from all invocations of the following macros: VIR_DEBUG VIR_DEBUG0 VIR_ERROR VIR_ERROR0 VIR_INFO VIR_WARN VIR_WARN0 Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
-
- 14 1月, 2010 2 次提交
-
-
由 Cole Robinson 提交于
The daemon will attempt to unregister domain events on client disconnect, even if no events were ever registered. This raises an unneeded error. Track in the qemu_client structure if events have been registered, and check this when performing cleanup.
-
由 Cole Robinson 提交于
Many node device calls weren't properly relaying error messages, and domain event registeration was not checking for error.
-
- 20 12月, 2009 1 次提交
-
-
由 Adam Litke 提交于
Use a dynamically sized xdr_array to pass memory stats on the wire. This supports the addition of future memory stats and reduces the message size since only supported statistics are returned. * src/remote/remote_protocol.x: provide defines for the new entry point * src/remote/remote_driver.c daemon/remote.c: implement the client and server side * daemon/remote_dispatch_args.h daemon/remote_dispatch_prototypes.h daemon/remote_dispatch_ret.h daemon/remote_dispatch_table.h src/remote/remote_protocol.c src/remote/remote_protocol.h: generated stubs
-
- 18 12月, 2009 1 次提交
-
-
由 Jiri Denemark 提交于
* src/remote/remote_protocol.x: update with new entry point * daemon/remote.c: add the new server dispatcher * daemon/remote_dispatch_args.h daemon/remote_dispatch_prototypes.h daemon/remote_dispatch_ret.h daemon/remote_dispatch_table.h src/remote/remote_protocol.c src/remote/remote_protocol.h: regenerated
-
- 11 12月, 2009 1 次提交
-
-
由 Matthias Bolte 提交于
-
- 12 11月, 2009 1 次提交
-
-
由 Cole Robinson 提交于
There is currently no way to determine the libvirt version of a remote libvirtd we are connected to. This is a useful piece of data to enable feature detection.
-
- 11 11月, 2009 1 次提交
-
-
由 Daniel P. Berrange 提交于
This implements the virConnectIsSecure, virConnectIsEncrypted, virDomainIsPersistent, virDomainIsActive, virNetworkIsActive, virNetworkIsPersistent, virStoragePoolIsActive, virStoragePoolIsPersistent, virInterfaceIsActive APIs in (nearly) all drivers. Exceptions are: phyp: missing domainIsActive/Persistent esx: missing domainIsPersistent opennebula: missing domainIsActive/Persistent * src/remote/remote_protocol.x: Define remote wire ABI for newly added APIs. * daemon/remote_dispatch*.h: Re-generated from remote_protocol.x * src/esx/esx_driver.c, src/lxc/lxc_driver.c, src/network/bridge_driver.c, src/opennebula/one_driver.c, src/openvz/openvz_conf.c, src/openvz/openvz_driver.c, src/phyp/phyp_driver.c, src/remote/remote_driver.c, src/storage/storage_driver.c, src/test/test_driver.c, src/uml/uml_driver.c, src/vbox/vbox_tmpl.c, src/xen/xen_driver.c, src/xen/xen_driver.h, src/xen/xen_inotify.c, src/xen/xen_inotify.h: Implement all the new APIs where possible
-
- 10 11月, 2009 1 次提交
-
-
由 Matthias Bolte 提交于
-
- 09 10月, 2009 1 次提交
-
-
由 Daniel P. Berrange 提交于
Since virMigratePrepareTunnel() is used for migration over the native libvirt connection, there is never any need to pass the target URI to this method. * daemon/remote.c, src/driver.h, src/libvirt.c, src/libvirt_internal.h, src/qemu/qemu_driver.c, src/remote/remote_driver.c, src/remote/remote_protocol.c, src/remote/remote_protocol.h, src/remote/remote_protocol.x: Remove 'uri_in' parameter from virMigratePrepareTunnel() method
-
- 02 10月, 2009 2 次提交
-
-
由 Daniel P. Berrange 提交于
The code which updated the message length after writing the payload wrote the updated length word in the wrong place since the XDR object was given a buffer pointing to the start of the header payload, rather than message start. * daemon/remote.c: Fix updating of event message length so that we actually send the payload, not just the header
-
由 Chris Lalancette 提交于
Implementation of tunnelled migration, using a Unix Domain Socket on the qemu backend. Note that this requires very new versions of qemu (0.10.7 at least) in order to get the appropriate bugfixes. Signed-off-by: NChris Lalancette <clalance@redhat.com>
-
- 30 9月, 2009 1 次提交
-
-
由 Chris Lalancette 提交于
This is necessary for the dispatch functions to be able to use streams in the future. Signed-off-by: NChris Lalancette <clalance@redhat.com>
-
- 23 9月, 2009 1 次提交
-
-
由 Chris Lalancette 提交于
Add the virStrncpy function, which takes a dst string, source string, the number of bytes to copy and the number of bytes available in the dest string. If the source string is too large to fit into the destination string, including the \0 byte, then no data is copied and the function returns NULL. Otherwise, this function copies n bytes from source into dst, including the \0, and returns a pointer to the dst string. This function is intended to replace all unsafe uses of strncpy in the code base, since strncpy does *not* guarantee that the buffer terminates with a \0. Signed-off-by: NChris Lalancette <clalance@redhat.com>
-
- 21 9月, 2009 1 次提交
-
-
由 Daniel P. Berrange 提交于
* qemud/: Rename to daemon/ * Makefile.am, configure.in, src/Makefile.am, src/remote_internal.c, tests/Makefile.am, tests/eventtest.c: s/qemud/daemon/ where needed
-
- 15 9月, 2009 2 次提交
-
-
由 Daniel P. Berrange 提交于
* include/libvirt/libvirt.h, include/libvirt/libvirt.h.in: Add virSecretGetUsageType, virSecretGetUsageID and virLookupSecretByUsage * python/generator.py: Mark virSecretGetUsageType, virSecretGetUsageID as not throwing exceptions * qemud/remote.c: Implement dispatch for virLookupSecretByUsage * qemud/remote_protocol.x: Add usage type & ID as attributes of remote_nonnull_secret. Add RPC calls for new public APIs * qemud/remote_dispatch_args.h, qemud/remote_dispatch_prototypes.h, qemud/remote_dispatch_ret.h, qemud/remote_dispatch_table.h, qemud/remote_protocol.c, qemud/remote_protocol.h: Re-generate * src/datatypes.c, src/datatypes.h: Add usageType and usageID as properties of virSecretPtr * src/driver.h: Add virLookupSecretByUsage driver entry point * src/libvirt.c: Implement virSecretGetUsageType, virSecretGetUsageID and virLookupSecretByUsage * src/libvirt_public.syms: Export virSecretGetUsageType, virSecretGetUsageID and virLookupSecretByUsage * src/remote_internal.c: Implement virLookupSecretByUsage entry * src/secret_conf.c, src/secret_conf.h: Remove the virSecretUsageType enum, now in public API. Make volume path mandatory when parsing XML * src/secret_driver.c: Enforce usage uniqueness when defining secrets. Implement virSecretLookupByUsage api method * src/virsh.c: Include usage for secret-list command
-
由 Daniel P. Berrange 提交于
Convert all the secret/storage encryption APIs / wire format to handle UUIDs in raw format instead of non-canonical printable format. Guarentees data format correctness. * docs/schemas/storageencryption.rng: Make UUID mandatory for a secret and validate fully * docs/schemas/secret.rng: Fully validate UUID * include/libvirt/libvirt.h, include/libvirt/libvirt.h.in, Add virSecretLookupByUUID and virSecretGetUUID. Make virSecretGetUUIDString follow normal API design pattern * python/generator.py: Skip generation of virSecretGetUUID, virSecretGetUUIDString and virSecretLookupByUUID * python/libvir.c, python/libvirt-python-api.xml: Manual impl of virSecretGetUUID,virSecretGetUUIDString and virSecretLookupByUUID * qemud/remote.c: s/virSecretLookupByUUIDString/virSecretLookupByUUID/ Fix get_nonnull_secret/make_nonnull_secret to use unsigned char * qemud/remote_protocol.x: Fix remote_nonnull_secret to use a remote_uuid instead of remote_nonnull_string for UUID field. Rename REMOTE_PROC_SECRET_LOOKUP_BY_UUID_STRING to REMOTE_PROC_SECRET_LOOKUP_BY_UUID_STRING and make it take an remote_uuid value * qemud/remote_dispatch_args.h, qemud/remote_dispatch_prototypes.h, qemud/remote_dispatch_ret.h, qemud/remote_dispatch_table.h, qemud/remote_protocol.c, qemud/remote_protocol.h: Re-generate * src/datatypes.h, src/datatypes.c: Store UUID in raw format instead of printable. Change virGetSecret to use raw format UUID * src/driver.h: Rename virDrvSecretLookupByUUIDString to virDrvSecretLookupByUUID and use raw format UUID * src/libvirt.c: Add virSecretLookupByUUID and virSecretGetUUID and re-implement virSecretLookupByUUIDString and virSecretGetUUIDString in terms of those * src/libvirt_public.syms: Add virSecretLookupByUUID and virSecretGetUUID * src/remote_internal.c: Rename remoteSecretLookupByUUIDString to remoteSecretLookupByUUID. Fix typo in args for remoteSecretDefineXML impl. Use raw UUID format for get_nonnull_secret and make_nonnull_secret * src/storage_encryption_conf.c, src/storage_encryption_conf.h: Storage UUID in raw format, and require it to be present in XML. Use UUID parser to validate. * secret_conf.h, secret_conf.c: Generate a UUID if none is provided. Storage UUID in raw format. * src/secret_driver.c: Adjust to deal with raw UUIDs. Save secrets in a filed with printable UUID, instead of base64 UUID. * src/virsh.c: Adjust for changed public API contract of virSecretGetUUIDString. * src/storage_Backend.c: DOn't undefine secret we just generated upon successful volume creation. Fix to handle raw UUIDs. Generate a non-clashing UUID * src/qemu_driver.c: Change to use lookupByUUID instead of lookupByUUIDString
-
- 02 9月, 2009 1 次提交
-
-
由 Miloslav Trmač 提交于
* qemud/remote_protocol.x: Define wire protocol for secrets public APIs * qemud/remote_protocol.h, qemud/remote_protocol.c, qemud/remote_dispatch_table.h, qemud/remote_dispatch_ret.h, qemud/remote_dispatch_prototypes.h, qemud/remote_dispatch_args.h: Re-generate from updated protocol definition * qemud/remote.c: Implement RPC dispatchers for new secrets APIs
-
- 26 8月, 2009 1 次提交
-
-
由 Daniel P. Berrange 提交于
* src/remote_internal.c: Split remoteAuthPolkit into separate impls for v0 and v1 to avoid compile warnings due to unused variables/params * qemud/remote.c: Remove accidental tabs
-
- 25 8月, 2009 1 次提交
-
-
由 Daniel P. Berrange 提交于
* configure.in: Check for pkcheck which indicates new policykit * qemud/Makefile.am: Install different versions of policy * qemud/libvirtd.policy: Rename to libvirtd.policy-0 * qemud/libvirtd.policy-1: new style policy * qemud/qemud.c, qemud/qemud.h, qemud/remote.c: Support new policykit API via external pkcheck helper * src/remote_internal.c: Don't prompt for polkit auth with new policykit API * libvirt.spec.in: deal with new policy install locations & deps
-
- 23 7月, 2009 1 次提交
-
-
由 Laine Stump 提交于
* qemud/remote.c src/interface_conf.[ch] src/veth.[ch]: more renaming from interface to iface
-
- 16 7月, 2009 6 次提交
-
-
由 Laine Stump 提交于
* src/driver.h: add new driver functions virDrvNumOfDefinedInterfaces and virDrvListDefinedInterfaces * src/libvirt.c: implements the entry points, calling new driver functions * qemud/remote.c qemud/remote_dispatch_args.h qemud/remote_protocol.[chx] qemud/remote_dispatch_prototypes.h qemud/remote_dispatch_ret.h qemud/remote_dispatch_table.h src/remote_internal.c: implement the client/server side of the RPC
-
由 Daniel P. Berrange 提交于
The 'remote_message_header' struct has a mis-leadingly named field 'direction'. It is really a reflection of the type of message, and some types can be sent in either direction. Thus the field is more accurately named 'type'. No function change. * qemud/remote_protocol.x: Rename 'direction' to 'type' in 'remote_message_header. Write better docs describing the message header field semantics & usage * qemud/remote_protocol.c, qemud/remote_protocol.h: Regenerate * qemud/remote.c, qemud/dispatch.c, src/remote_internal.c Update to reflect rename of 'direction' to 'type'
-
由 Daniel P. Berrange 提交于
The current qemudRegisterClientEvent() code is used both for registering the initial socket watch, and updating the already registered watch. This causes unneccessary complexity in alot of code which only cares about updating existing watches. The updating of a watch cannot ever fail, nor is a reference to the 'qemud_server' object required. This introduces a new qemudUpdateClientEvent() method for that case, allowing the elimination of unneccessary error checking and removal of the server back-reference in struct qemud_client. * qemud/qemud.h: Remove 'server' field from struct qemud_client. Add qemudUpdateClientEvent() method. Remove 'update' param from qemudRegisterClientEvent method * qemud/dispatch.c, qemud/qemud.c, qemud/remote.c: Update alot of code to use qemudUpdateClientEvent() instead of qemudRegisterClientEvent(). Move more logic from remoteRelayDomainEvent into remoteDispatchDomainEventSend.
-
由 Daniel P. Berrange 提交于
The naming convention for structs used in the RPC layer is for incoming requests to be called XXXX_args, and the associated outgoing reply to be called XXXX_ret. Asynchronously emitted messages (eg events) are re-using the XXXX_ret naming scheme. This patch changes that such that async messages are XXXX_msg, and stops adding entries for them in the dispatch table, avoiding the need for a dummy no-op implementation. * qemud/remote.c: Remove dummy remoteDispatchDomainEvent, no longer required. Update to replace remote_domain_event_ret with xdr_remote_domain_event_msg * qemud/remote_protocol.x: Rename remote_domain_event_ret to remote_domain_event_msg * qemud/remote_generate_stubs.pl: Adding handling for new XXX_msg structs. * src/remote_internal.c: Rename remote_domain_event_ret to remote_domain_event_msg * qemud/remote_dispatch_prototypes.h, qemud/remote_dispatch_ret.h, qemud/remote_dispatch_table.h, qemud/remote_protocol.h, qemud/remote_protocol.c: auto-regenerate
-
由 Daniel P. Berrange 提交于
Introduces an API for encoding the header field for outgoing messages allowing some duplicated code to be eliminated * qemud/dispatch.c, qemud/dispatch.h: add remoteEncodeClientMessageHeader for encoding message header. Update remoteDispatchClientRequest to use this method. * qemud/remote.c: Update remoteDispatchDomainEventSend to use the generic remoteEncodeClientMessageHeader() for encoding event message hedaders. Push some logic from remoteRelayDomainEvent down into remoteDispatchDomainEventSend.
-
由 Daniel P. Berrange 提交于
* po/POTFILES.in: Add qemud/dispatch.c * qemud/dispatch.c, qemud/dispatch.h: Generic code handling dispatch of RPC messages. * qemud/Makefile.am: Add dispatch.c to build * qemud/qemud.c: Include dispatch.h * qemud/qemud.h: Remove remoteDispatchClientRequest, remoteRelayDomainEvent now in dispatch.h * qemud/remote.c: Remove remoteDispatchClientRequest, remoteRelayDomainEvent now in dispatch.c, and dispatch_args, dispatch_ret, dispatch_fn & dispatch_data now in remote.h * qemud/remote.h: Add typedefs for dispatch_args, dispatch_ret, dispatch_fn, dispath_data. Add remoteGetDispatchData() API
-
- 15 7月, 2009 1 次提交
-
-
由 Daniel P. Berrange 提交于
* qemud/remote.c: Send back the actual libvirt connection error rather than formatting a generic error for security driver methods * src/libvirt.c: Fix virDomainGetSecurityLabel, and virNodeGetSecurityModel to correctly set the error on the virConnectPtr object, and raise a full error rather than warning when not supported
-
- 11 6月, 2009 1 次提交
-
-
由 Daniel Veillard 提交于
* qemud/remote.c: fixing a typo pointed out by Runa Bhattacharjee Daniel
-
- 29 5月, 2009 1 次提交
-
-
由 Daniel P. Berrange 提交于
-
- 21 5月, 2009 1 次提交
-
-
由 Daniel P. Berrange 提交于
-
- 20 5月, 2009 1 次提交
-
-
由 Daniel Veillard 提交于
* configure.in include/libvirt/libvirt.h[.in] include/libvirt/virterror.h qemud/remote.c qemud/remote_dispatch_args.h qemud/remote_dispatch_prototypes.h qemud/remote_dispatch_ret.h qemud/remote_dispatch_table.h qemud/remote_protocol.[chx] src/Makefile.am src/datatypes.c src/datatypes.h src/driver.h src/libvirt.c src/remote_internal.c src/virterror.c src/libvirt_private.syms src/libvirt_public.syms: Add the Interface config APIs and remote stubs for those, patch by Laine Stump * AUTHORS: add Laine daniel
-
- 19 5月, 2009 1 次提交
-
-
由 Cole Robinson 提交于
-
- 13 5月, 2009 1 次提交
-
-
由 Cole Robinson 提交于
-
- 24 4月, 2009 1 次提交
-
-
由 Daniel P. Berrange 提交于
-
- 03 4月, 2009 1 次提交
-
-
由 Daniel P. Berrange 提交于
-
- 16 3月, 2009 1 次提交
-
-
由 Daniel P. Berrange 提交于
-
- 03 3月, 2009 2 次提交
-
-
由 Daniel P. Berrange 提交于
-
由 Daniel Veillard 提交于
* qemud/remote.c qemud/remote_dispatch_args.h qemud/remote_dispatch_prototypes.h qemud/remote_dispatch_table.h qemud/remote_protocol.c qemud/remote_protocol.h qemud/remote_protocol.x src/remote_internal.c: Implement attach/reattach/reset in the remote driver, patch by Mark McLoughlin. Daniel
-
- 06 2月, 2009 1 次提交
-
-
由 Jim Meyering 提交于
* qemud/qemud.c (GET_CONF_STR): Use virStrerror, not strerror. * qemud/remote.c (remoteDispatchDomainBlockPeek): Likewise. (remoteDispatchDomainMemoryPeek, remoteDispatchAuthSaslInit): Likewise. (remoteDispatchAuthPolkit): Likewise. * src/lxc_container.c (lxcContainerAvailable): Likewise. * src/network_driver.c (networkStartNetworkDaemon): Likewise. (networkShutdownNetworkDaemon): Likewise. * src/qemu_conf.c (qemudExtractVersion, qemudNetworkIfaceConnect): * src/storage_conf.c (virStoragePoolLoadAllConfigs): Likewise. * src/storage_driver.c (storagePoolUndefine): Likewise. * src/uml_driver.c (umlStartup, umlStartVMDaemon): Likewise. * src/util.c (virFileReadAll): Likewise. * src/uuid.c (virUUIDGenerate): Likewise. * src/xen_internal.c (get_cpu_flags): Likewise.
-