virDomainDeleteConfig is meant to delete the persistent config and thus
it resets vm->autostart. Copy parts of qemuProcessRemoveDomainStatus to
a new helper to avoid using the incorrect function.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1230071

The scope name, even according to our docs is
"machine-$DRIVER\x2d$VMNAME.scope" virSystemdMakeScopeName would use the
resource partition name instead of "machine-" if it was specified thus
creating invalid scope paths.

This makes libvirt drop cgroups for a VM that uses custom resource
partition upon reconnecting since the detected scope name would not
match the expected name generated by virSystemdMakeScopeName.

The error is exposed by the following log entry:

debug : virCgroupValidateMachineGroup:302 : Name 'machine-qemu\x2dtestvm.scope' for controller 'cpu' does not match 'testvm', 'testvm.libvirt-qemu' or 'machine-test-qemu\x2dtestvm.scope'

for a "/machine/test" resource and "testvm" vm.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1238570

The nbd device pid file doesn't appear immediately after starting
qemu-nbd: adding a small loop to wait for it before getting it's
processes PIDs.

The virLXCControllerAppendNBDPids function didn't properly initialize
pids and npids. In case of failure it was crashing when freeing those.

Add the sysfs_prefix argument to the call to allow for setting the
path for tests to something other than SYSFS_SYSTEM_PATH.

Add the sysfs_prefix argument to the call to allow for setting the
path for tests to something other than SYSFS_CPU_PATH which is a
derivative of SYSFS_SYSTEM_PATH

Use cpupath for nodeCapsInitNUMAFake and remove SYSFS_CPU_PATH

Add the sysfs_prefix argument to the call to allow for setting the
path for tests to something other than SYSFS_SYSTEM_PATH.

Add the sysfs_prefix argument to the call to allow for setting the
path for tests to something other than SYSFS_SYSTEM_PATH.

Add the sysfs_prefix argument to the call to allow for setting the
path for tests to something other than SYSFS_SYSTEM_PATH.

Explicit 'enum' keyword does not work with portablexdr-rpcgeb, causing its
parser to fail. Fix method is borrowed from virnetprotocol.x
Signed-off-by: NPavel Fedin <p.fedin@samsung.com>

So, recently I was testing the LXC driver. You know, startup some
domains. But to my surprise, I was not able to start a single one:

  virsh # start --console test
  error: Reconnected to the hypervisor
  error: Failed to start domain test
  error: internal error: guest failed to start: unexpected exit status 125

So I've start digging. It turns out, that in virExec(), when I printed
out the @cmd, I got strange values: *(cmd->outfdptr) was certainly not
valid FD number: it has random value of several millions. This
obviously made prepareStdFd(childout, STDOUT_FILENO) fail (line 611).
But outfdptr is set in virCommandSetOutputFD(). The only place within
LXC driver where the function is called is in
virLXCProcessBuildControllerCmd(). If you take a closer look at the
function it looks like this:

static virCommandPtr
virLXCProcessBuildControllerCmd(virLXCDriverPtr driver,
                                ..
                                int logfd,
                                const char *pidfile)
{
    ...
    virCommandSetOutputFD(cmd, &logfd);
    virCommandSetErrorFD(cmd, &logfd);
    ...
}

Yes, you guessed it. @logfd is passed into the function by value.
However, in the function we try to get its address (an address of a
local variable) which is no longer valid once function is finished and
stack is cleaned. Therefore when cmd->outfdptr is evaluated at any
point after this function, we may get a random number, depending on
what's currently on the stack. Of course, this may work sometimes too
- it depends on the compiler how it arranges the code, when the stack
is wiped out.

In order to fix this, lets pass a pointer to @logfd instead of
figuring out (wrong) its value in a function.

The bug was introduced in e1de5521.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Although defined the same way, fortunately there hadn't been any deviation.
Ensure any assignments to onCrash use VIR_DOMAIN_LIFECYCLE_CRASH_* defs and
not VIR_DOMAIN_LIFECYCLE_* defs

Functions like virDomainOpenConsole() and virDomainOpenChannel() accept
NULL as a dev_name parameter.  Try using alias for the error message if
dev_name is not specified.

Before:
  error: internal error: character device <null> is not using a PTY

After:
  error: internal error: character device serial0 is not using a PTY
Signed-off-by: NLuyao Huang <lhuang@redhat.com>

So that they can format private data (e.g., disk private data) stored
elsewhere in the domain object.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Future kernels will mandate the use of nosuid+nodev+noexec
flags when mounting the /proc/sys filesystem. Unconditionally
add them now since they don't harm things regardless and could
mitigate future security attacks.

On older systems it shadows global declaration of daemon() function.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

This allows to have more servers in one daemon which helps isolating
some resources.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Add the qemu-nbd tasks to the container cgroup to make sure those will
be killed when the container is stopped. In order to reliably get the
qemu-nbd tasks PIDs, we use /sys/devices/virtual/block/<DEV>/pid as
qemu-nbd is daemonizing itself.

Most virDomainDiskIndexByName callers do not care about the index; what
they really want is a disk def pointer.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

So far, we are not reporting if numatune was even defined. The
value of zero is blindly returned (which maps onto
VIR_DOMAIN_NUMATUNE_MEM_STRICT). Unfortunately, we are making
decisions based on this value. Instead, we should not only return
the correct value, but report to the caller if the value is valid
at all.

For better viewing of this patch use '-w'.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Again, a clean-up for which we don't have proper syntax-check.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Upping an interface for no reason and not configuring it is a cardinal sin.

With the default addrgenmode if eui64 it sticks a link-local address to the
interface. That is not good, as NetworkManager would see an address configured,
assume the interface is already configured and won't touch it iself and the
interface might stay unconfigured until the end of the days.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1124721Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

rather then -> rather than
Signed-off-by: NYueWenyuan <yuewenyuan@huawei.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>

Every domain that grabs a domain object to work over should
reference it to make sure it won't disappear meanwhile.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

This needs to specified in way too many places for a simple validation
check. The ostype/arch/virttype validation checks later in
DomainDefParseXML should catch most of the cases that this was covering.

Rather than an opencoded string. This should be a no-op

 # virsh -c lxc:/// start helloworld
 error: Failed to start domain helloworld
 error: internal error: guest failed to start: Unknown
 failure in libvirt_lxc startup

Return success when there are no cpuset.mems to be set,
instead of failing without setting an error.
Signed-off-by: NJán Tomko <jtomko@redhat.com>

 # virsh -c lxc:/// start helloworld
 error: Failed to start domain helloworld
 error: internal error: guest failed to start: Invalid value '1-3'
 for 'cpuset.mems': Invalid argument

Free the cpu mask to avoid reusing it as a mem mask
in virCgroupSetCpusetMems
if virDomainNumatuneMaybeFormatNodeset does not set a mask.
Signed-off-by: NLuyao Huang <lhuang@redhat.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>

/var/run may reside on a tmpfs and we fail to create the PID file if
/var/run/lxc does not exist.

Since commit 0a8addc1, the lxc driver's state directory isn't
automatically created before starting a domain. Now, the lxc driver
makes sure the state directory exists when it initializes.
Signed-off-by: NLubomir Rintel <lkundrak@v3.sk>

Like we are doing in qemu driver (ea576ee5), lets call
virNumaSetupMemoryPolicy() only if really needed. Problem is, if
we numa_set_membind() child, there's no way to change it from the
daemon afterwards. So any later attempts to change the pinning
will fail. But in very weird way - CGroups will be set, but due
to membind child will not allocate memory from any other node.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

This patch adds code that parses and formats configuration for memory
devices.

A simple configuration would be:
<memory model='dimm'>
  <target>
    <size unit='KiB'>524287</size>
    <node>0</node>
  </target>
</memory>

A complete configuration of a memory device:
<memory model='dimm'>
  <source>
    <pagesize unit='KiB'>4096</pagesize>
    <nodemask>1-3</nodemask>
  </source>
  <target>
    <size unit='KiB'>524287</size>
    <node>1</node>
  </target>
</memory>

This patch preemptively forbids use of the <memory> device in individual
drivers so the users are warned right away that the device is not
supported.

Add a XML element that will allow to specify maximum supportable memory
and the count of memory slots to use with memory hotplug.

To avoid possible confusion and misuse of the new element this patch
also explicitly forbids the use of the maxMemory setting in individual
drivers's post parse callbacks. This limitation will be lifted when the
support is implemented.

virnetdevopenvswitch.h declares a few functions that can be called to
add ports to and remove them from OVS bridges, and retrieve the
migration data for a port. It does not contain any data definitions
that are used by domain_conf.h. But for some reason, domain_conf.h
virnetdevopenvswitch.h should be directly #including it. This adds a
few lines to the project, but saves all the files that don't need it
from the extra computing, and makes the dependencies more clear cut.

As there are two possible approaches to define a domain's memory size -
one used with legacy, non-NUMA VMs configured in the <memory> element
and per-node based approach on NUMA machines - the user needs to make
sure that both are specified correctly in the NUMA case.

To avoid this burden on the user I'd like to replace the NUMA case with
automatic totaling of the memory size. To achieve this I need to replace
direct access to the virDomainMemtune's 'max_balloon' field with
two separate getters depending on the desired size.

The two sizes are needed as:
1) Startup memory size doesn't include memory modules in some
hypervisors.
2) After startup these count as the usable memory size.

Note that the comments for the functions are future aware and document
state that will be present after a few later patches.

There was a mess in the way how we store unlimited value for memory
limits and how we handled values provided by user.  Internally there
were two possible ways how to store unlimited value: as 0 value or as
VIR_DOMAIN_MEMORY_PARAM_UNLIMITED.  Because we chose to store memory
limits as unsigned long long, we cannot use -1 to represent unlimited.
It's much easier for us to say that everything greater than
VIR_DOMAIN_MEMORY_PARAM_UNLIMITED means unlimited and leave 0 as valid
value despite that it makes no sense to set limit to 0.

Remove unnecessary function virCompareLimitUlong.  The update of test
is to prevent the 0 to be miss-used as unlimited in future.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1146539Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

libvirt was unconditionally calling virNetDevBandwidthClear() for
every interface (and network bridge) of a type that supported
bandwidth, whether it actually had anything set or not. This doesn't
hurt anything (unless ifname == NULL!), but is wasteful.

This patch makes sure that all calls to virNetDevBandwidthClear() are
qualified by checking that the interface really had some bandwidth
setup done, and checks for a null ifname inside
virNetDevBandwidthClear(), silently returning success if it is null
(as well as removing the ATTRIBUTE_NONNULL from that function's
prototype, since we can't guarantee that it is never null,
e.g. sometimes a type='ethernet' interface has no ifname as it is
provided on the fly by qemu).

As virDomainNumatuneSet now doesn't allocate the virDomainNuma object
any longer it's not necessary to pass the pointer to a pointer to store
the object as it will not change any longer.

While touching the parameter definitions I've also changed the name of
the parameter to "numa".

Use the virDomainDefNew() helper to allocate the definition instead of
doing it via VIR_ALLOC.