So far the namespaces were turned on by default unconditionally.
For all non-Linux platforms we provided stub functions that just
ignored whatever namespaces setting there was in qemu.conf and
returned 0 to indicate success. Moreover, we didn't really check
if namespaces are available on the host kernel.

This is suboptimal as we might have ignored user setting.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

This is a simple wrapper over mount(). However, not every system
out there is capable of moving a mount point. Therefore, instead
of having to deal with this fact in all the places of our code we
can have a simple wrapper and deal with this fact at just one
place.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

This is unnecessary wrapper around virProcessNamespaceAvailable().
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Other drivers (like qemu) would like to know if the namespaces
are available therefore it makes sense to move this function to
a shared module.

At the same time, this function had some default namespaces that
are checked with every call. It is not necessary - let callers
pass just those namespaces they are interested in.

With the move the function is renamed to
virProcessNamespaceAvailable.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Due to a copy-paste error, the debug message reads:

  Setting up disks

It should have been:

  Setting up inputs.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Add "New Features" entry to describe the overwrite flag for logical backend.

Add bug fixes description of overwrite changes for a file system storage pool

Add "Improvements" for commit id 'bb74a7ff' and '78be2e8b' which add
support for using the parent wwnn/wwpn or fabric_name rather than just
using the parent by scsi_hostX name.

Commit id 'bb74a7ff' forgot to adjust the storage docs to describe the
new fields.

List indexes where mixed up in the code looping over the USB
input devices.

When composing the path to the default known_hosts file (for the libssh
and libssh2 drivers), do not check whether the configuration directory
(determined by virGetUserConfigDirectory()) exists: both the drivers can
handle non-existing files, and are able to create them (and their
directories) in that case.

This adds a small behaviour change: before, the key for an unknown host,
and manually accepted, was saved only if the configuration directory
existed -- a bit incoherent behaviour though.

If any of them is specified for the libssh and libssh2 drivers, there is
no need to depend on checks based on other paths: in particular, a
specified path for known_hosts was ignored if the local config directory
could not be determined, and the path for keyfile was ignored if the
home could not be determined.

Instead, lazily determine and use these two paths only in case they are
needed.

Make sure that virNetLibsshSessionSetHostKeyVerification accepts a NULL
value for the path to the known_hosts file:
- call ssh_options_set(SSH_OPTIONS_KNOWNHOSTS) anyway, using /dev/null,
  otherwise libssh will use its default path
- do not call ssh_write_knownhost when no known hosts file was set

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1406457

Suggested-by: NJohn Ferlan <jferlan@redhat.com>

Surprisingly there was a virDomainPCIAddressReleaseAddr() function
already, but it was completely unused. Since we don't reserve entire
slots at once any more, there is no need to release entire slots
either, so we just replace the single call to
virDomainPCIAddressReleaseSlot() with a call to
virDomainPCIAddressReleaseAddr() and remove the now unused function.

The keen observer may be concerned that ...Addr() doesn't call
virDomainPCIAddressValidate(), as ...Slot() did. But really the
validation was pointless anyway - if the device hadn't been suitable
to be connected at that address, it would have failed validation
before every being reserved in the first place, so by definition it
will pass validation when it is being unplugged. (And anyway, even if
something "bad" happened and we managed to have a device incorrectly
at the given address, we would still want to be able to free it up for
use by a device that *did* validate properly).

This function doesn't actually reserve an entire slot any more, it
reserves a single PCI address, so this name is more appropriate.

This function is only called in two places, and the function itself is
just adding a single argument and calling
virDomainPCIAddressReserveNextAddr(), so we can remove it and instead
call virDomainPCIAddressReserveNextAddr() directly. (The main
motivation for doing this is to free up the name so that
qemuDomainPCIAddressReserveNextSlot() can be renamed in the next
patch, as its current name is now inaccurate and misleading).

This function doesn't actually reserve an entire slot any more, it
reserves a single PCI address, so this name is more appropriate.

This is in preparation for renaming virDomainPCIAddressReserveSlot()
to virDomainPCIAddressReserveAddr(), which is a better description of
what it does.

It is now only used in domain_addr.c.

All occurences of the former use fromConfig=true, and that's exactly
how virDomainPCIAddressReserveSlot() calls
virDomainPCIaddressReserveAddr(), so just use *Slot() so that *Addr()
can be made static to conf/domain_addr.c (both functions will be
renamed in upcoming patches).

Since we don't actually reserve an entire slot at a time anymore, the
name of this function is just confusing, and it's almost identical in
operation to virDomainPCIAddressReserveNextAddr() anyway, so remove
the *Slot() function and replace calls to it with calls to *Addr(...,
-1).

With the advent of VIR_PCI_CONNECT_AGGREGATE_SLOT, the new name is
more appropriate, since the address returned may be another address
on the same slot as last time, not necessarily a new slot.

fromConfig should be true if the caller wants
virDomainPCIAddressValidate() to loosen restrictions on its
interpretation of the pciConnectFlags. In particular, either
PCI_DEVICE or PCIE_DEVICE will be counted as equivalent to both, and
HOTPLUG will be ignored. In a few cases where libvirt was manually
overriding automatic address assignment, it was setting fromConfig to
false when validating the hardcoded manual override. This patch
changes those to fromConfig=true as a preemptive strike against any
future bugs that might otherwise surface.

Although setting virDomainPCIAddressReserveAddr()'s fromConfig=true is
correct when a PCI addres is coming from a domain's config, the *true*
purpose of the fromConfig argument is to lower restrictions on what
kind of device can plug into what kind of controller - if fromConfig
is true, then a PCIE_DEVICE can plug into a slot that is marked as
only compatible with PCI_DEVICE (and vice versa), and the HOTPLUG flag
is ignored.

For a long time there have been several calls to
virDomainPCIAddressReserveAddr() that have fromConfig incorrectly set
to false - it's correct that the addresses aren't coming from user
config, but they are coming from hardcoded exceptions in libvirt that
should, if anything, pay *even less* attention to following the
pciConnectFlags (under the assumption that the libvirt programmer knew
what they were doing).

See commit b87703cf for an example of an actual bug caused by the
incorrect setting of the "fromConfig" argument to
virDomainPCIAddressReserveAddr(). Although they haven't resulted in
any reported bugs, this patch corrects all the other incorrect
settings of fromConfig in calls to virDomainPCIAddressReserveAddr().

Set the VIR_PCI_CONNECT_AGGREGATE_SLOT flag for pcie-root-ports so
that they will be assigned to all the functions on a slot.

Some qemu test case outputs had to be adjusted due to the
pcie-root-ports now being put on multiple functions.

If a PCI device has VIR_PCI_CONNECT_AGGREGATE_SLOT set in its
pciConnectFlags, then during address assignment we allow multiple
instances of this type of device to be auto-assigned to multiple
functions on the same device. A slot is used for aggregating multiple
devices only if the first device assigned to that slot had
VIR_PCI_CONNECT_AGGREGATE_SLOT set. but any device types that have
AGGREGATE_SLOT set might be mix/matched on the same slot.

(NB: libvirt should never set the AGGREGATE_SLOT flag for a device
type that might need to be hotplugged. Currently it is only planned
for pcie-root-port and possibly other PCI controller types, and none
of those are hotpluggable anyway)

There aren't yet any devices that use this flag. That will be in a
later patch.

If there are multiple devices assigned to the different functions of a
single PCI slot, they will not work properly if the device at function
0 doesn't have its "multi" attribute turned on, so it makes sense for
libvirt to turn it on during PCI address assignment. Setting multi
then assures that the new setting is stored in the config (so it will
be used next time the domain is started), preventing any potential
problems in the case that a future change in the configuration
eliminates the devices on all non-0 functions (multi will still be set
for function 0 even though it is the only function in use on the slot,
which has no useful purpose, but also doesn't cause any problems).

(NB: If we were to instead just decide on the setting for
multifunction at runtime, a later removal of the non-0 functions of a
slot would result in a silent change in the guest ABI for the
remaining device on function 0 (although it may seem like an
inconsequential guest ABI change, it *is* a guest ABI change to turn
off the multi bit).)

This utility function iterates through all devices looking for any
with a PCI address that has function != 0 (which implies that multiple
functions are in use on that slot), then uses an inner iterator to
find the device that's on function 0 of that same slot and sets the
"multi" in its virDomainDeviceInfo (as long as it hasn't already been
set explicitly by someone who presumably has better information than
we do).

It isn't yet called from anywhere, so will have no functional effect.

There is a very slight time advantage to beginning the search for the
next unused PCI address at the slot *after* the previous find (which
is now used), but if we do that, we will miss allocating the other
functions of the same slot (when we implement a
VIR_PCI_CONNECT_AGGREGATE_SLOT flag to support that).

virDomainPCIAddressGetNextSlot() starts searching from the last
allocated address and goes to the end of all the buses, then goes back
to the first bus and searches from there up to the starting point (in
case any address has been freed since the last time an address was
allocated. The loops for these two are almost, but not exactly, the
same, so they have remained as separate loops with the same code
inside the loop. To lessen maintenance headaches, the identical code
has been moved out into the function
virDomainPCIAddressFindUnusedFunctionOnBus(), which is called in place
of the loop contents.

setting reserveEntireSlot really accomplishes nothing - instead of
going to the trouble of computing the value for reserveEntireSlot and
then possibly setting *all* functions of the slot as in-use, we can
just set the in-use bit only for the specific function being used by a
device.  Later we will know from the context (the PCI connect flags,
and whether we are reserving a specific address or asking for "the
next available") whether or not it is okay to allocate other functions
on the same slot.

Although it's not used yet, we allow specifying "-1" for the function
number when looking for the "next available slot" - this is going to
end up meaning "return the lowest available function in the slot, but
since we currently only provide a function from an otherwise unused
slot, "-1" ends up meaning "0".

When keeping track of which functions of which slots are allocated, we
will need to have more information than just the current bitmap with a
bit for each function that is currently stored for each slot in a
virDomainPCIAddressBus. To prepare for adding more per-slot info, this
patch changes "uint8_t slots" into "virDomainPCIAddressSlot slot", which
currently has a single member named "functions" that serves the same
purpose previously served directly by "slots".

libxl doesn't provide a way to write one log for each domain. Thus
we need to demux the messages. If our logger doesn't know to which
domain to attribute a message, then it will write it to the default
log file.

Starting with Xen 4.9 (commit f9858025 and following), libxl will
write the domain ID in an easy to grab manner. The logger introduced
by this commit will use it to demux the libxl log messages.

Thanks to the default log file, this logger will also work with older
versions of Xen.

By default, pool-info will convert sizes to human friendly units.

This patch will introduce option [--bytes].
If specified, the raw sizes will be in the output.
Signed-off-by: NChen Hanxiao <chenhanxiao@gmail.com>

Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

* remove _vboxIID_v2_x and _vboxIID_v3_x structs and repalce with one
  _vboxIID as all supprted vbox versions have the same IID structure.
* remove vboxIIDUnion that was used to abstract version depended IID
  differences.
* remove IID_MEMBER macro and use the new vboxIID directly.

This function was not implemented for vbox 5+ which removed
TakeScreenShotPNGToArray but provides TakeScreenShotToArray with
BitmapFormat_PNG argument which is the same thing.

The IVRDxServer was used because vbox < 4 used to have IVRDPServer
whereas vbox >= 4 has IVRDEServer. Now that support for legacy
versions is being removed, we can use IVRDEServer.

* removed oldMediumInterface flag and related code that was used for
  vbox 2.x
* remove accelerate2DVideo and networkRemoveInterface flags which were
  also conditionals for handling legacy vbox versions.