In order to use more common code and set up for a future type, modify the
encryption secret to allow the "usage" attribute or the "uuid" attribute
to define the secret. The "usage" in the case of a volume secret would be
the path to the volume as dictated by the backwards compatibility brought
on by virStorageGenerateQcowEncryption where it set up the usage field as
the vol->target.path and didn't allow someone to provide it. This carries
into virSecretObjListFindByUsageLocked which takes the secret usage attribute
value from from the domain disk definition and compares it against the
usage type from the secret definition. Since none of the code dealing
with qcow/qcow2 encryption secrets uses usage for lookup, it's a mostly
cosmetic change. The real usage comes in a future path where the encryption
is expanded to be a luks volume and the secret will allow definition of
the usage field.

This code will make use of the virSecretLookup{Parse|Format}Secret common code.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

This reverts commit 0b4645a7.

This feature was accidentally pushed in the feature freeze.

For type='ethernet' interfaces only.

This option allows or disallows detection of zero-writes if it is set to
"on" or "off", respectively.  It can be also set to "unmap" in which
case it will try discarding that part of image based on the value of the
"discard" option.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1335832Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

VNC graphics already supports sockets but only via 'socket' attribute.
This patch coverts that attribute into listen type 'socket'.

For backward compatibility we need to handle listen type 'socket' and 'socket'
attribute properly to support old XMLs and new XMLs.  If both are provided they
have to match, if only one of them is provided we need to be able to parse that
configuration too.

To not break migration back to old libvirt if the socket is provided by user we
need to generate migratable XML without the listen element and use only 'socket'
attribute.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

This function doesn't follow our convention of naming functions.

This function doesn't follow our convention of naming functions.

This function doesn't follow our convention of naming functions.

Historically, we added heads=1 to videos, but for example for qxl, we
did not reflect that on the command line.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1283207Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Hand-entering indexes for 20 PCI controllers is not as tedious as
manually determining and entering their PCI addresses, but it's still
annoying, and the algorithm for determining the proper index is
incredibly simple (in all cases except one) - just pick the lowest
unused index.

The one exception is USB2 controllers because multiple controllers in
the same group have the same index. For these we look to see if 1) the
most recently added USB controller is also a USB2 controller, and 2)
the group *that* controller belongs to doesn't yet have a controller
of the exact model we're just now adding - if both are true, the new
controller gets the same index, but in all other cases we just assign
the lowest unused index.

With this patch in place and combined with the automatic PCI address
assignment, we can define a PCIe switch with several ports like this:

  <controller type='pci' model='pcie-root-port'/>
  <controller type='pci' model='pcie-switch-upstream-port'/>
  <controller type='pci' model='pcie-switch-downstream-port'/>
  <controller type='pci' model='pcie-switch-downstream-port'/>
  <controller type='pci' model='pcie-switch-downstream-port'/>
  <controller type='pci' model='pcie-switch-downstream-port'/>
  <controller type='pci' model='pcie-switch-downstream-port'/>
  ...

These will each get a unique index, and PCI addresses that connect
them together appropriately with no pesky numbers required.

Add a new element to <domain> XML:
<os>
  <acpi>
    <table type="slic">/path/to/acpi/table/file</table>
  </acpi>
</os>

To supply a path to a SLIC (Software Licensing) ACPI
table blob.

https://bugzilla.redhat.com/show_bug.cgi?id=1327537

We support qemu version 0.12.0+, which has it.

This test requests a read-only virtual FAT drive on the IDE bus.
Read-only IDE drives are unsupported, but libvirt only displays
the error if it has the QEMU_CAPS_DRIVE_READONLY capability.
Read-write FAT drives are also unsupported.

Rather than only assigning a PCI address when no address is given at
all, also do it when the config says that the address type is 'pci',
but it gives no address (virDeviceInfoPCIAddressWanted()).

There are also several places after parsing but prior to address
assignment where code previously expected that any info with address
type='pci' would have a *valid* PCI address, which isn't always the
case - now we check not only for type='pci', but also for a valid
address (virDeviceInfoPCIAddressPresent()).

The test case added in this patch was directly copied from Cole's patch titled:

    qemu: Wire up address type=pci auto_allocate

Commit 55320c23 introduced a new test for VNC to test if
vnc_auto_unix_socket is set in qemu.conf, but forget to enable it in
qemuxml2argvtest.c.

This patch also moves the code in qemuxml2xmltest.c next to other VNC
tests and refactor the test so we also check the case for parsing active
XML.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

We have stopped supporting Xenner some time ago.

This wires up qemuDomainAssignAddresses into the new
virDomainDefAssignAddressesCallback, so it's always triggered
via virDomainDefPostParse. We are essentially doing this already
with open coded calls sprinkled about.

qemu argv parse output changes slightly since previously it wasn't
hitting qemuDomainAssignAddresses.

The only case where the hardware capabilities influence the result
is when no <gic/> element was provided.

The test programs now ensure both that the correct GIC version is
picked in that case, and that hardware capabilities are not taken
into account when the user has already picked a GIC version.

Now that we choose the GIC version based on hardware features when
no <gic/> element has been provided, we need a way to fake the GIC
capabilities of the host.

Update the qemuxml2argv and qemuxml2xml tests to allow this.

Add the ability to add an 'iothread' to the controller which will be how
virtio-scsi-pci and virtio-scsi-ccw iothreads have been implemented in qemu.

Describe the new functionality and add tests to parse/validate that the
new attribute can be added.

Signed-off-by: NBoris Fiuczynski <fiuczy@linux.vnet.ibm.com>

Similarly to what commit 71408079 did with some internal paths,
clear vnc socket paths that were generated by us.  Having such path in
the definition can cause trouble when restoring the domain.  The path is
generated to the per-domain directory that contains the domain ID.
However, that ID will be different upon restoration, so qemu won't be
able to create that socket because the directory will not be prepared.

To be able to migrate to older libvirt, skip formatting the socket path
in migratable XML if it was autogenerated.  And mark it as autogenerated
if it already exists and we're parsing live XML.

Best viewed with '-C'.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1326270Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

This controller provides a single PCIe port on a new root. It is
similar to pci-expander-bus, intended to provide a bus that can be
associated with a guest-identifiable NUMA node, but is for
machinetypes with PCIe rather than PCI (e.g. q35-based machinetypes).

Aside from PCIe vs. PCI, the other main difference is that a
pci-expander-bus has a companion pci-bridge that is automatically
attached along with it, but pcie-expander-bus has only a single port,
and that port will only connect to a pcie-root-port, or to a
pcie-switch-upstream-port. In order for the bus to be of any use in
the guest, it must have either a pcie-root-port or a
pcie-switch-upstream-port attached (and one or more
pcie-switch-downstream-ports attached to the
pcie-switch-upstream-port).

This is a standard PCI root bus (not a bridge) that can be added to a
440fx-based domain. Although it uses a PCI slot, this is *not* how it
is connected into the PCI bus hierarchy, but is only used for
control. Each pci-expander-bus provides 32 slots (0-31) that can
accept hotplug of standard PCI devices.

The usefulness of pci-expander-bus relative to a pci-bridge is that
the NUMA node of the bus can be specified with the <node> subelement
of <target>. This gives guest-side visibility to the NUMA node of
attached devices (presuming that management apps only assign a device
to a bus that has a NUMA node number matching the node number of the
device on the host).

Each pci-expander-bus also has a "busNr" attribute. The expander-bus
itself will take the busNr specified, and all buses that are connected
to this bus (including the pci-bridge that is automatically added to
any expander bus of model "pxb" (see the next commit)) will use
busNr+1, busNr+2, etc, and the pci-root (or the expander-bus with next
lower busNr) will use bus numbers lower than busNr.

This allows tests to check for specific failure scenarios

After removing qemuBuildCommandLineCallbacks, testutilsqemu.h does not
need to include qemu_command.h.

Include just qemu_conf.h here and qemu_domain_address.h in files that
need it.

Commit dc98a5bc refactored the code a lot and forget about checking if
listen attribute is specified.  This ensures that listen attribute and
first listen element are compared only if both exist.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Add Spice graphics gl attribute. qemu 2.6 should have -spice gl=on argument to
enable opengl rendering context (patches on the ML). This is necessary to
actually enable virgl rendering.

Add a qemuxml2argv test for virtio-gpu + spice with virgl.
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Per-domain directories were introduced in order to be able to
completely separate security labels for each domain (commit
f1f68ca3).  However when the domain
name is long (let's say a ridiculous 110 characters), we cannot
connect to the monitor socket because on length of UNIX socket address
is limited.  In order to get around this, let's shorten it in similar
fashion and in order to avoid conflicts, throw in an ID there as well.
Also save that into the status XML and load the old status XMLs
properly (to clean up after older domains).  That way we can change it
in the future.

The shortening can be seen in qemuxml2argv tests, for example in the
hugepages-pages2 case.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Allow testing XML parsing with different flags.

This does nothing more than adding the new device and capability.
The device is present since QEMU 2.6.0.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Test all kinds of scenarios, including guests asking for GIC but
failing to specify a version, guests specifying an invalid version
and guests trying to use GIC with non-virt or even non-ARM machines.

Unify the naming to prepare for new test cases that will be added
later on.

Convert a couple of output XML files for the qemuxml2xml test to
symlinks while at it, since they were identical to the corresponding
input XML files anyways.

Moreover, since we're only interested in testing GIC support here,
simplify XML files by getting rid of the unrelevant bits.

Clarify the point of some of the test cases by renaming them. Add more
xml2xml tests.

We use the PreFormat callback for this. Many test cases need to be extended
to pass in proper qemuCaps flags so AssignAddresses doesn't throw errors.

One test case (pcie-root-port-too-many) is dropped, since it was meant
only for checking an error condition in qemuxml2argv, and one we add in
AssignAddresses it errors here too.

Long term I think AssignAddresses should be handled in qemu's PostParse
callback, but that's not entirely straightforward. Handling it here
means we can get the test suite churn over with.

This allows individual driver tests to hook in their own code before
the def is formatted and compared.

We will eventually use this in the qemuxml2xml

Similar to how we do it for qemuxml2argvtest. This will be used in future
patches.

QEMU_CAPS_DEVICE is always enabled for qemu binaries we support.
Sync qemuxml2* to match, and regenerate all test output.