'diskSourceNetwork' schema define was rather big and it would be hard to
simplify it. Split out the host portion subelement into a separate
define.

They don't contain any elements to interleave.

This patch introduces

    <cache level='N' mode='emulate'/>
    <cache mode='passthrough'/>
    <cache mode='disable'/>

sub element of /domain/cpu. Currently only a single <cache> element is
allowed.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

We are currently parsing only rx/frames/max because that's the only
value that makes sense for us.  The tun device just added support for
this one and the others are only supported by hardware devices which
we don't need to worry about as the only way we'd pass those to the
domain is using <hostdev/> or <interface type='hostdev'/>.  And in
those cases the guest can modify the settings itself.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

A mediated device will be identified by a UUID (with 'model' now being
a mandatory <hostdev> attribute to represent the mediated device API) of
the user pre-created mediated device. We also need to make sure that if
user explicitly provides a guest address for a mdev device, the address
type will be matching the device API supported on that specific mediated
device and error out with an incorrect XML message.

The resulting device XML:
<devices>
  <hostdev mode='subsystem' type='mdev' model='vfio-pci'>
    <source>
      <address uuid='c2177883-f1bb-47f0-914d-32a22e3a8804'>
    </source>
  </hostdev>
</devices>
Signed-off-by: NErik Skultety <eskultet@redhat.com>

The attribute can be used to request a specific way of checking whether
the virtual CPU matches created by the hypervisor matches the
specification in domain XML.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

QEMU 2.9 introduces the pcie-root-port device, which is
a generic version of the existing ioh3420 device.

Make the new device available to libvirt users.

For NVDIMM devices it is optionally possible to specify the size
of internal storage for namespaces. Namespaces are a feature that
allows users to partition the NVDIMM for different uses.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Now that NVDIMM has found its way into libvirt, users might want
to fine tune some settings for each module separately. One such
setting is 'share=on|off' for the memory-backend-file object.
This setting - just like its name suggest already - enables
sharing the nvdimm module with other applications. Under the hood
it controls whether qemu mmaps() the file as MAP_PRIVATE or
MAP_SHARED.

Yet again, we have such config knob in domain XML, but it's just
an attribute to numa <cell/>. This does not give fine enough
tuning on per-memdevice basis so we need to have the attribute
for each device too.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

NVDIMM is new type of memory introduced into QEMU 2.6. The idea
is that we have a Non-Volatile memory module that keeps the data
persistent across domain reboots.

At the domain XML level, we already have some representation of
'dimm' modules. Long story short, NVDIMM will utilize the
existing <memory/> element that lives under <devices/> by adding
a new attribute 'nvdimm' to the existing @model and introduce a
new <path/> element for <source/> while reusing other fields. The
resulting XML would appear as:

    <memory model='nvdimm'>
      <source>
        <path>/tmp/nvdimm</path>
      </source>
      <target>
        <size unit='KiB'>523264</size>
        <node>0</node>
      </target>
      <address type='dimm' slot='0'/>
    </memory>

So far, this is just a XML parser/formatter extension. QEMU
driver implementation is in the next commit.

For more info on NVDIMM visit the following web page:

    http://pmem.io/Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

bhyve supports 'gop' video device that allows clients to connect
to VMs using VNC clients. This commit adds support for that to
the bhyve driver:

 - Introducr 'gop' video device type
 - Add capabilities probing for the 'fbuf' device that's
   responsible for graphics
 - Update command builder routines to let users configure
   domain's VNC via gop graphics.
Signed-off-by: NRoman Bogorodskiy <bogorodskiy@gmail.com>

This patch adds support and documentation
for the emulation_faults perf event.
Signed-off-by: NNitesh Konkar <nitkon12@linux.vnet.ibm.com>

This patch adds support and documentation
for the alignment_faults perf event.
Signed-off-by: NNitesh Konkar <nitkon12@linux.vnet.ibm.com>

This patch adds support and documentation
for the page_faults_maj perf event.
Signed-off-by: NNitesh Konkar <nitkon12@linux.vnet.ibm.com>

This patch adds support and documentation
for the page_faults_min perf event.
Signed-off-by: NNitesh Konkar <nitkon12@linux.vnet.ibm.com>

This patch adds support and documentation
for the cpu_migrations perf event.
Signed-off-by: NNitesh Konkar <nitkon12@linux.vnet.ibm.com>

This patch adds support and documentation
for the context_switches perf event.
Signed-off-by: NNitesh Konkar <nitkon12@linux.vnet.ibm.com>

This patch adds support and documentation
for the page_faults perf event.
Signed-off-by: NNitesh Konkar <nitkon12@linux.vnet.ibm.com>

This patch adds support and documentation for
the task_clock perf event.
Signed-off-by: NNitesh Konkar <nitkon12@linux.vnet.ibm.com>

This patch adds support and documentation for
the cpu_clock perf event.
Signed-off-by: NNitesh Konkar <nitkon12@linux.vnet.ibm.com>

With that users could access files outside /dev/shm.  That itself
isn't a security problem, but might cause some errors we want to
avoid.  So let's forbid slashes as we do with domain and volume names
and also mention that in the schema.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1395496Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Add a new attribute 'rendernode' to <gl> spice element.

Give it to QEMU if qemu supports it (queued for 2.9).
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

This part introduces new xml elements for file based
memorybacking support and their parsing.
(It allows vhost-user to be used without hugepages.)

New xml elements:
<memoryBacking>
  <source type="file|anonymous"/>
  <access mode="shared|private"/>
  <allocation mode="immediate|ondemand"/>
</memoryBacking>

So far we allow to set MTU for libvirt networks. However, not all
domain interfaces have to be plugged into a libvirt network and
even if they are, they might want to have a different MTU (e.g.
for testing purposes).
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

This reverts commit ae16c95f.

This patch adds support and documentation for
a generalized hardware cache event called cache_l1d
perf event.
Signed-off-by: NNitesh Konkar <nitkon12@linux.vnet.ibm.com>

This patch adds support and documentation for
the ref_cpu_cycles perf event.
Signed-off-by: NNitesh Konkar <nitkon12@linux.vnet.ibm.com>

This patch adds support and documentation for
the stalled_cycles_backend perf event.
Signed-off-by: NNitesh Konkar <nitkon12@linux.vnet.ibm.com>

This patch adds support and documentation
for the stalled_cycles_frontend perf event.
Signed-off-by: NNitesh Konkar <nitkon12@linux.vnet.ibm.com>

This patch adds support and documentation
for the bus_cycles perf event.
Signed-off-by: NNitesh Konkar <nitkon12@linux.vnet.ibm.com>

This patch adds support and documentation
for the branch_misses perf event.
Signed-off-by: NNitesh Konkar <nitkon12@linux.vnet.ibm.com>

With current perf framework, this patch adds support and documentation
for the branch_instructions perf event.
Signed-off-by: NNitesh Konkar <nitkon12@linux.vnet.ibm.com>

Modify _virDomainBlockIoTuneInfo and rng schema to support the group_name
option for iotune throttling. Document the new value.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

With the QEMU components in place, provide the XML parsing to
invoke that code when given the following XML snippet:

    <hostdev mode='subsystem' type='scsi_host'>
      <source protocol='vhost' wwpn='naa.501234567890abcd'/>
    </hostdev>

An optional address element can be specified within the hostdev
(pick CCW or PCI as necessary):

    <address type='ccw' cssid='0xfe' ssid='0x0' devno='0x0625'/>
    <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/>

Add basic vhost-scsi tests which were cloned from hostdev-scsi-virtio-scsi
in both xml2argv and xml2xml. Added ones for both vhost-scsi-ccw and
vhost-scsi-pci since the syntaxes are slightly different between them.

Also adjusted the docs to describe the changes.
Signed-off-by: NEric Farman <farman@linux.vnet.ibm.com>
Reviewed-by: NBoris Fiuczynski <fiuczy@linux.vnet.ibm.com>

The old ivshmem is deprecated in QEMU, so let's use the better
ivshmem-{plain,doorbell} variants instead.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Just the default one now, new ones will be added in following commits.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Modify _virDomainBlockIoTuneInfo and rng schema to support the _length
options for bps/iops throttling values. Document the new values.

Add an optional "tls='yes|no'" attribute for a TCP chardev.

For QEMU, this will allow for disabling the host config setting of the
'chardev_tls' for a domain chardev channel by setting the value to "no" or
to attempt to use a host TLS environment when setting the value to "yes"
when the host config 'chardev_tls' setting is disabled, but a TLS environment
is configured via either the host config 'chardev_tls_x509_cert_dir' or
'default_tls_x509_cert_dir'
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

As with all other devices, it's not part of 'address'.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

The smbios docs allow any string to be passed and libvirt does not
really do any validation on them. Allow passing any string.

Partially resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1373535