This converts the following public API datatypes to use the
virObject infrastructure:

  virConnectPtr
  virDomainPtr
  virDomainSnapshotPtr
  virInterfacePtr
  virNetworkPtr
  virNodeDevicePtr
  virNWFilterPtr
  virSecretPtr
  virStreamPtr
  virStorageVolPtr
  virStoragePoolPtr

The code is significantly simplified, since the mutex in the
virConnectPtr object now only needs to be held when accessing
the per-connection virError object instance. All other operations
are completely lock free.

* src/datatypes.c, src/datatypes.h, src/libvirt.c: Convert
  public datatypes to use virObject
* src/conf/domain_event.c, src/phyp/phyp_driver.c,
  src/qemu/qemu_command.c, src/qemu/qemu_migration.c,
  src/qemu/qemu_process.c, src/storage/storage_driver.c,
  src/vbox/vbox_tmpl.c, src/xen/xend_internal.c,
  tests/qemuxml2argvtest.c, tests/qemuxmlnstest.c,
  tests/sexpr2xmltest.c, tests/xmconfigtest.c: Convert
  to use virObjectUnref/virObjectRef
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Per the FSF address could be changed from time to time, and GNU
recommends the following now: (http://www.gnu.org/licenses/gpl-howto.html)

  You should have received a copy of the GNU General Public License
  along with Foobar.  If not, see <http://www.gnu.org/licenses/>.

This patch removes the explicit FSF address, and uses above instead
(of course, with inserting 'Lesser' before 'General').

Except a bunch of files for security driver, all others are changed
automatically, the copyright for securify files are not complete,
that's why to do it manually:

  src/security/security_selinux.h
  src/security/security_driver.h
  src/security/security_selinux.c
  src/security/security_apparmor.h
  src/security/security_apparmor.c
  src/security/security_driver.c

Update the QEMU driver to use virReportError instead of
the qemuReportError custom macro
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

This patch cleans up some missing "%s" before translation macros,
for strings which are const without format specifiers

Introduce new members in the virMacAddr 'class'
- virMacAddrSet: set virMacAddr from a virMacAddr
- virMacAddrSetRaw: setting virMacAddr from raw 6 byte MAC address buffer
- virMacAddrGetRaw: writing virMacAddr into raw 6 byte MAC address buffer
- virMacAddrCmp: comparing two virMacAddr
- virMacAddrCmpRaw: comparing a virMacAddr with a raw 6 byte MAC address buffer

then replace raw MAC addresses by replacing

- 'unsigned char *' with virMacAddrPtr
- 'unsigned char ... [VIR_MAC_BUFLEN]' with virMacAddr

and introduce usage of above functions where necessary.

QEMU (and librbd) flush the cache on the source before the
destination starts, and the destination does not read any
changeable data before that, so live migration with rbd caching
is safe.

This makes 'virsh migrate' work with rbd and caching without the
--unsafe flag.
Reported-by: NVladimir Bashkirtsev <vladimir@bashkirtsev.com>
Signed-off-by: NJosh Durgin <josh.durgin@inktank.com>

Now that domain listing is a thin wrapper around child listing,
it's easier to have a common entry point.  This restores the
hashForEach optimization lost in the previous patch when there
are no snapshots being filtered out of the entire list.

* src/conf/domain_conf.h (virDomainSnapshotObjListGetNames)
(virDomainSnapshotObjListNum): Add parameter.
(virDomainSnapshotObjListGetNamesFrom)
(virDomainSnapshotObjListNumFrom): Delete.
* src/libvirt_private.syms (domain_conf.h): Drop deleted functions.
* src/conf/domain_conf.c (virDomainSnapshotObjListGetNames):
Merge, and (re)add an optimization.
* src/qemu/qemu_driver.c (qemuDomainUndefineFlags)
(qemuDomainSnapshotListNames, qemuDomainSnapshotNum)
(qemuDomainSnapshotListChildrenNames)
(qemuDomainSnapshotNumChildren): Update callers.
* src/qemu/qemu_migration.c (qemuMigrationIsAllowed): Likewise.
* src/conf/virdomainlist.c (virDomainListPopulate): Likewise.

Currently, we are passing only one boolean (migrated) so there is
no real profit in this. But it creates starting position for
next patch.

otherwise migration fails for e.g. network filesystems like sheepdog
with:

   error: Invalid relative path 'virt-name': Invalid argument

while we should fail with:

    Migration may lead to data corruption if disks use cache != none

References:

    http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=676328
    https://www.redhat.com/archives/libvirt-users/2012-May/msg00088.html

If we migrate to fd, spec->fwdType is not MIGRATION_FWD_DIRECT,
we will close spec->dest.fd.local in qemuMigrationRun(). So we
should set spec->dest.fd.local to -1 in qemuMigrationRun().

Bug present since 0.9.5 (commit 32617617).

When we added the default USB controller into domain XML, we efficiently
broke migration to older versions of libvirt that didn't support USB
controllers at all (0.9.4 and earlier) even for domains that don't use
anything that the older libvirt can't provide. We still want to present
the default USB controller in any XML seen by a user/app but we can
safely remove it from the domain XML used during migration. If we are
migrating to a new enough libvirt, it will add the controller XML back,
while older libvirt won't be confused with it although it will still
tell qemu to create the controller.

Similar approach can be used in the future whenever we find out we
always enabled some kind of device without properly advertising it in
domain XML.

Always use appropriate qemuDomain{,Def}Format wrapper since it may do
some additional magic based on the flags.

Once qemu monitor reports migration has completed, we just closed our
end of the pipe and let migration tunnel die. This generated bogus error
in case we did so before the thread saw EOF on the pipe and migration
was aborted even though it was in fact successful.

With this patch we first wake up the tunnel thread and once it has read
all data from the pipe and finished the stream we close the
filedescriptor.

A small additional bonus of this patch is that real errors reported
inside qemuMigrationIOFunc are not overwritten by virStreamAbort any
more.

When QEMU reported failed or canceled migration, we correctly detected
it but didn't really consider it as an error condition and migration
protocol just went on. Luckily, some of the subsequent steps eventually
failed end we reported an (unrelated and mostly random) error back to
the caller.

In some cases (spotted with broken connection during tunneled migration)
we were overwriting the original error with worse or even misleading
errors generated when we were cleaning up after failed migration.

Currently, we have 3 boolean arguments we have to pass
to qemuProcessStart(). As libvirt grows it is harder and harder
to remember them and their position. Therefore we should
switch to flags instead.

This patch adds a netlink callback when migrating a VEPA enabled
virtual machine.  It fixes a Bug where a VM would not request a port
association when it was cleared by lldpad.

This patch requires the latest git version of lldpad to work.
Signed-off-by: ND. Herrendoerfer <d.herrendoerfer@herrendoerfer.name>

In case an API fails with "cannot acquire state change lock", searching
for the API that possibly forgot to end its job is not always easy.
Let's keep track of the job owner and print it out for easier
identification.

The code is splattered with a mix of

  sizeof foo
  sizeof (foo)
  sizeof(foo)

Standardize on sizeof(foo) and add a syntax check rule to
enforce it
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

In the current V3 migration protocol, Libvirt does not
check the result of the function

  qemuMigrationVPAssociatePortProfiles

This means that it is possible for a migration to complete
successfully even when the VM loses network connectivity on
the destination host.

With this change libvirt aborts the migration
(during the "finish" step) when the above function fails, that
is to say when at least one of the port profile associations fails.

Signed-off by: Christian Benvenuti <benve@cisco.com>

Move error reporting out of the callers, into virURIParse
and virURIFormat, to get consistency.

* include/libvirt/virterror.h, src/util/virterror.c: Add VIR_FROM_URI
* src/util/viruri.c, src/util/viruri.h: Add error reporting
* src/esx/esx_driver.c, src/libvirt.c, src/libxl/libxl_driver.c,
  src/lxc/lxc_driver.c, src/openvz/openvz_driver.c,
  src/qemu/qemu_driver.c, src/qemu/qemu_migration.c,
  src/remote/remote_driver.c, src/uml/uml_driver.c,
  src/vbox/vbox_tmpl.c, src/vmx/vmx.c, src/xen/xen_driver.c,
  src/xen/xend_internal.c, tests/viruritest.c: Remove error
  reporting
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Since we defined a custom virURIPtr type, we should use a
virURIFree method instead of assuming it will always be
a typedef for xmlURIPtr

* src/util/viruri.c, src/util/viruri.h, src/libvirt_private.syms:
  Add a virURIFree method
* src/datatypes.c, src/esx/esx_driver.c, src/libvirt.c,
  src/qemu/qemu_migration.c, src/vmx/vmx.c, src/xen/xend_internal.c,
  tests/viruritest.c: s/xmlFreeURI/virURIFree/
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

When a client which started non-p2p migration dies in a bad time, the
source libvirtd never clears the migration job and almost nothing can be
done with the domain without restarting the daemon. This patch makes use
of connection close callbacks and ensures that migration job is properly
discarded when the client disconnects.

Destination daemon should not rely on the client or source daemon
(depending on the type of migration) to call Finish when migration
fails, because the client may crash before it can do so. The domain
prepared for incoming migration is set to be destroyed (and migration
job cleaned up) when connection with the client closes but this is not
enough. If the associated qemu process crashes after Prepare step and
the domain is cleaned up before the connection gets closed, autodestroy
is not called for the domain and migration jobs remains set. In case the
domain is defined on destination host (i.e., it is not completely
removed once destroyed) we keep the job set for ever. To fix this, we
register a cleanup callback which is responsible to clean migration-in
job when a domain dies anywhere between Prepare and Finish steps. Note
that we can't blindly clean any job when spotting EOF on monitor since
normally an API is running at that time.

This reverts commit 61f2b6ba and most of
commit d8916dc8, which effectively
brings back commit ef1065cf written by
Jim Fehlig:

The qemu migration speed default is 32MiB/s as defined in migration.c

/* Migration speed throttling */
static int64_t max_throttle = (32 << 20);

There's no need to throttle migration when targeting a file, so set
migration speed to unlimited prior to migration, and restore to libvirt
default value after migration.

Default units is MB for migrate_set_speed monitor command, so
(INT64_MAX / (1024 * 1024)) is used for unlimited migration speed.

This was reverted because migration to file could not be canceled and
even monitored since qemu was not processing any monitor commands until
the migration finished. This is now different as we make sure the
file descriptor we pass to qemu is able to properly report EAGAIN.
Recent qemu changes might have helped as well.

I tested managedsave with this patch in and indeed, it is 10x faster
while I can still monitor its progress.

When host-model and host-passthrouh CPU modes were introduced, qemu
driver was properly modify to update guest CPU definition during
migration so that we use the right CPU at the destination. However,
similar treatment is needed for (managed)save and snapshots since they
need to save the exact CPU so that a domain can be properly restored.
To avoid repetition of such situation, all places that need live XML
share the code which generates it.

As a side effect, this patch fixes error reporting from
qemuDomainSnapshotWriteMetadata().

Currently, startupPolicy='requisite' was determining cold boot
by migrateFrom != NULL. That means, if domain was started up
with migrateFrom set we didn't require disk source path and allowed
it to be dropped. However, on snapshot-revert domain wasn't migrated
but according to documentation, requisite should drop disk source
as well.

This patch includes the following changes to virnetdevmacvlan.c and
virnetdevvportprofile.c:

 - removes some netlink functions which are now available in
   virnetdev.c

 - Adds a vf argument to all port profile functions.

For 802.1Qbh devices, the port profile calls can use a vf argument if
passed by the caller. If the vf argument is -1 it will try to derive the vf
if the device passed is a virtual function.

For 802.1Qbg devices, This patch introduces a null check for the device
argument because during port profile assignment on a hostdev, this argument
can be null.
Signed-off-by: NRoopa Prabhu <roprabhu@cisco.com>

No matter what cache mode is used, readonly disks are always safe wrt
migration. Shared disks are required to be readonly or to disable
host-side cache, which makes them safe as well.

Add de-association handling for 802.1qbg (vepa) via lldpad
netlink messages. Also adds the possibility to perform an
association request without waiting for a confirmation.
Signed-off-by: ND. Herrendoerfer <d.herrendoerfer@herrendoerfer.name>

This hook is called during the Prepare phase on destination host and may
be used for changing domain XML.

Function xmlParseURI does not remove square brackets around IPv6
address when parsing. One of the solutions is making wrappers around
functions working with xmlURI*. This assures that uri->server will be
always properly assigned and it doesn't have to be changed when used
on some new place in the code.
For this purpose, functions virParseURI and virSaveURI were
added. These function are wrappers around xmlParseURI and xmlSaveUri
respectively.
Also there is one new syntax check function to prohibit these functions
anywhere else.

File changes:
 - src/util/viruri.h        -- declaration
 - src/util/viruri.c        -- definition
 - src/libvirt_private.syms -- symbol export
 - src/Makefile.am          -- added source and header files
 - cfg.mk                   -- added sc_prohibit_xmlURI
 - all others               -- ID name and include fixes

Migrating domains with disks using cache != none is unsafe unless the
disk images are stored on coherent clustered filesystem. Thus we forbid
migrating such domains unless VIR_MIGRATE_UNSAFE flags is used.

When migrating a qemu domain, we enter the monitor, send some commands,
try to connect to destination qemu, send other commands, end exit the
monitor. However, if we couldn't connect to destination qemu we forgot
to exit the monitor.

Bug introduced by commit d9d518b1.

An upcoming patch will add a <virtualport> element to interfaces of
type='bridge', so it makes sense to give this function a more generic
name.

Calling qemuDomainMigrateGraphicsRelocate notifies spice clients to
connect to destination qemu so that they can seamlessly switch streams
once migration is done. Unfortunately, current qemu is not able to
accept any connections while incoming migration connection is open.
Thus, we need to delay opening the migration connection to the point
spice client is already connected to the destination qemu.

compat{a->i}bility
erron{->e}ous
nec{c->}essary.
Either "the" or "a".
Signed-off-by: NPhilipp Hahn <hahn@univention.de>

Commit 5d784bd6 was a nice attempt to
clarify the semantics by requiring domain name from dxml to either match
original name or dname. However, setting dxml domain name to dname
doesn't really work since destination host needs to know the original
domain name to be able to use it in migration cookies. This patch
requires domain name in dxml to match the original domain name. The
change should be safe and backward compatible since migration would fail
just a bit later in the process.

When sVirt is integrated with the LXC driver, it will be neccessary
to invoke the security driver APIs using only a virDomainDefPtr
since the lxc_container.c code has no virDomainObjPtr available.
Aside from two functions which want obj->pid, every bit of the
security driver code only touches obj->def. So we don't need to
pass a virDomainObjPtr into the security drivers, a virDomainDefPtr
is sufficient. Two functions also gain a 'pid_t pid' argument.

* src/qemu/qemu_driver.c, src/qemu/qemu_hotplug.c,
  src/qemu/qemu_migration.c, src/qemu/qemu_process.c,
  src/security/security_apparmor.c,
  src/security/security_dac.c,
  src/security/security_driver.h,
  src/security/security_manager.c,
  src/security/security_manager.h,
  src/security/security_nop.c,
  src/security/security_selinux.c,
  src/security/security_stack.c: Change all security APIs to use a
  virDomainDefPtr instead of virDomainObjPtr

A generic error code was returned, if the user aborted a migration job.
This made it hard to distinguish between a user requested abort and an
error that might have occured. This patch introduces a new error code,
which is returned in the specific case of a user abort, while leaving
all other failures with their existing code. This makes it easier to
distinguish between failure while mirgrating and an user requested
abort.

 * include/libvirt/virterror.h: - add new error code
 * src/util/virterror.c: - add message for the new error code
 * src/qemu/qemu_migration.h: - Emit operation aborted error instead of
                                operation failed, on migration abort