This defines the internal driver API and stubs out each driver

* src/driver.h: Define virDrvDomainGetBlockInfo signature
* src/libvirt.c, src/libvirt_public.syms: Glue public API to drivers
* src/esx/esx_driver.c, src/lxc/lxc_driver.c, src/opennebula/one_driver.c,
  src/openvz/openvz_driver.c, src/phyp/phyp_driver.c,
  src/test/test_driver.c, src/uml/uml_driver.c, src/vbox/vbox_tmpl.c,
  src/xen/xen_driver.c, src/xenapi/xenapi_driver.c: Stub out driver

Some applications need to be able to query a guest's disk info,
even for paths not managed by the storage pool APIs. This adds
a very simple API to get this information, modelled on the
virStorageVolGetInfo API, but with an extra field 'physical'.
Normally 'physical' and 'allocation' will be identical, but
in the case of a qcow2-like file stored inside a block device
'physical' will give the block device size, while 'allocation'
will give the qcow2 image size

* include/libvirt/libvirt.h.in: Define virDomainGetBlockInfo

When running virsh edit, we are unlinking and setting
the tmp variable to NULL before going to the end of the
function, meaning that we never free tmp.  Since the
exit to the function will always unlink and free tmp,
just remove this bit of code and let it get done at the
end.
Signed-off-by: NChris Lalancette <clalance@redhat.com>

qemuDomainPCIAddressSetFree was freeing up the hash
table for the pci addresses, but not freeing up the addr
structure.  Looking over the callers of this function, it
seems like they expect it to also free up the structure,
so do that here.
Signed-off-by: NChris Lalancette <clalance@redhat.com>

We were over-writing a pointer without freeing it in
case of a disk device, leading to a memory leak.
Signed-off-by: NChris Lalancette <clalance@redhat.com>

When building on Ubuntu with make -j3 (or more), it would always
fail when trying to build virt-aa-helper.  I'm not an expert in
automake by any means, but I think the entry for virt-aa-helper
is mis-using LDADD; it shouldn't be putting direct paths to
libvirt_conf.la and libvirt_util.la, but instead referencing those
names.  With this patch in place, I'm able to successfully build
on Ubuntu 9.04 with make -j3.
Signed-off-by: NChris Lalancette <clalance@redhat.com>

Signed-off-by: NChris Lalancette <clalance@redhat.com>

The previous commit changes a goto from 'endjob' to 'cleanup',
leaving the endjob label unused. Remove it to avoid compile
warning.

* src/qemu/qemu_driver.c: Remove 'endjob' label

I have primarily followed the pattern of the 'secret' driver to provide
support for the missing python bindings for the network filter API.

* src/qemu/qemu_driver.c (qemuDomainSnapshotCreateXML): When setting
"vm" to NULL, jump over vm-dereferencing code to "cleanup".
(qemuDomainRevertToSnapshot): Likewise.

* src/qemu/qemu_driver.c (qemudDomainCreate): Goto cleanup,
not "endjob", since we know "vm" is already NULL.  No semantic change.

Let configure detect ld instead of hardcoding /usr/bin/ld, because
MinGW may have ld in /bin.

Only use a .def file to export symbols on MinGW. Cygwin's ld supports
the normal .syms file used on Linux.

* cfg.mk (gnulib_srcdir): Override maint.mk default.
(_update_required): Run in correct directory.

use /var/lib/libvirt/dnsmasq since /var/lib/libvirt/network is
unreadable by the dnsmasq binary

* src/network/bridge_driver.c: update DNSMASQ_STATE_DIR
* src/Makefile.am: create it on make install
* libvirt.spec.in: take the new directory into account

So far the references to other filters needed to appear before filtering
rules. With the below patch they can now appear in any order.

Also I forgot to add a couple of 'rarp's.

In cases where the security driver failed to restore a label after a
guest has saved, we mistakenly jumped to the error cleanup paths.
This is not good, because the operation has in fact completed and
cannot be rolled back completely. Label restore is non-critical, so
just log the problem instead. Also add a missing restore call in
the error cleanup path

* src/qemu/qemu_driver.c: Fix handling of security driver
  restore failures in QEMU domain save

When cgroups is enabled, access to block devices is likely to be
restricted to a whitelist. Prior to saving a guest to a block device,
it is necessary to add the block device to the whitelist. This is
not required upon restore, since QEMU reads from stdin

* src/qemu/qemu_driver.c: Add block device to cgroups whitelist
  if neccessary during domain save.

The save process was relying on use of the shell >> append
operator to ensure the save data was placed after the libvirt
header + XML. This doesn't work for block devices though.
Replace this code with use of 'dd' and its 'seek' parameter.
This means that we need to pad the header + XML out to a
multiple of dd block size (in this case we choose 512).

The qemuMonitorMigateToCommand() monitor API is used for both
save/coredump, and migration via UNIX socket. We can't simply
switch this to use 'dd' since this causes problems with the
migration usage. Thus, create a dedicated qemuMonitorMigateToFile
which can accept an filename + offset, and remove the filename
from the current qemuMonitorMigateToCommand() API

* src/qemu/qemu_driver.c: Switch to qemuMonitorMigateToFile
  for save and core dump
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
  src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h,
  src/qemu/qemu_monitor_text.c, src/qemu/qemu_monitor_text.h: Create
  a new qemuMonitorMigateToFile, separate from the existing
  qemuMonitorMigateToCommand to allow handling file offsets

It is possible to use block devices with domain save/restore. Upon
failure QEMU unlinks the path being saved to. This isn't good when
it is a block device !

* src/qemu/qemu_driver.c: Don't unlink block devices if save fails

If a transient QEMU crashes during save attempt, then the virDomainPtr
object may be freed. If a persistent QEMU crashes during save, then
the 'priv->mon' field is no longer valid since it will be inactive.

* src/qemu/qemu_driver.c: Fix two crashes when QEMU exits
  during a save attempt

Qemu currently sends an Ethernet packet with protocol id 0x835 once a VM
was successfully migrated. The content of the packet looks like a
gratuitous RARP, just with the wrong protocol ID, which should be
0x8035. I wrote some filters to let either one of the packets pass and
am adapting the clean-traffic sample filter to use it. I am also
doing some changes on the existing ARP filter which was lacking a
test for source MAC address.

Signed-off-by: NChris Lalancette <clalance@redhat.com>

Signed-off-by: NGuido Günther <agx@sigxcpu.org>

In particular I was forgetting to take the qemuMonitorPrivatePtr
lock (via qemuDomainObjBeginJob), which would cause problems
if two users tried to access the same domain at the same time.
This patch also fixes a problem where I was forgetting to remove
a transient domain from the list of domains.

Thanks to Stephen Shaw for pointing out the problem and testing
out the initial patch.
Signed-off-by: NChris Lalancette <clalance@redhat.com>

Just removing reverences to the deprecated CVS server and the old git
on et.redhat.com

This patch adds support for the RARP protocol. This may be needed due to
qemu sending out a RARP packet (at least that's what it seems to want to
do even though the protocol id is wrong) when migration finishes and
we'd need a rule to let the packets pass.

Unfortunately my installation of ebtables does not understand -p RARP
and also seems to otherwise depend on strings in /etc/ethertype
translated to protocol identifiers. Therefore I need to pass -p 0x8035
for RARP. To generally get rid of the dependency of that file I switch
all so far supported protocols to use their protocol identifier in the
-p parameter rather than the string.

I am also extending the schema and added a test case.

changes from v1 to v2:
- added test case into patch

With JSON qemu monitor, we get a STOP event from qemu whenever qemu
stops guests CPUs. The downside of it is that vm->state is changed to
PAUSED and a new generic paused event is send to applications. However,
when we ask qemu to stop the CPUs we are not really interested in qemu
event and we usually want to issue a more specific event.

By setting vm->status to PAUSED before actually sending the request to
qemu (and resetting it back if the request fails) we can ignore the
event since the event handler does nothing when the guest is already
paused. This solution is quite hacky but unfortunately it's the best
solution which I was able to come up with and it doesn't introduce a
race condition.

* virStorageEncryptionFormat is called from both
  virDomainDiskDefFormat and virStorageVolTargetDefFormat.  The proper
  indentation in the generated XML depends on the caller.  My earlier
  patch to fix the incorrect indentation for the domain XML broke the
  indentation for the storage XML.  This patch adopts Laine's
  suggestion of requring the caller of virStorageEncryptionFormat to
  provide an unsigned int with the number of spaces the output should
  be indented.  The patch modifies both callers to provide the
  additional argument.

* Add a regression test for the domain XML

* src/conf/domain_conf.c src/conf/storage_conf.c
  src/conf/storage_encryption_conf.c src/conf/storage_encryption_conf.h:
  change the indentation code
* tests/qemuxml2xmltest.c
  tests/qemuxml2argvdata/qemuxml2argv-encrypted-disk.args
  tests/qemuxml2argvdata/qemuxml2argv-encrypted-disk.xml: add a regression test

as their drivers requires linux only headers

Cygwin's XDR implementation defines xdr_u_int64_t instead of
xdr_uint64_t and lacks IXDR_PUT_INT32/IXDR_GET_INT32.

Alter the IXDR_GET_LONG regex in rpcgen_fix.pl so it doesn't destroy
the #define IXDR_GET_INT32 IXDR_GET_LONG in remote_protocol.x.

Also fix the remote_protocol.h regex in rpcgen_fix.pl.

With this patch I want to enable hex number inputs in the filter XML. A
number that was entered as hex is also printed as hex unless a string
representing the meaning can be found.

I am also extending the schema and adding a test case. A problem with
the DSCP value is fixed on the way as well.

Changes from V1 to V2:

- using asHex boolean in all printf type of functions to select the
output format in hex or decimal format

This patch makes libvirtd start the dnsmasq daemon with a
--dhcp-hostsfile option instead of --dhcp-host options for each
'//ip/dhcp/host' entries defined in network xml file.

the dnsmasq host file is stored into /var/lib/libvirt/network

* src/network/bridge_driver.c: define the directory for the hostfiles
  and save/delete them to be used by dnsmasq

* po/POTFILES.in: the new module contains translatable strings
* src/Makefile.am: include the files in the utils set
* src/libvirt_private.syms: exports the symbols internally

It implements an idea to save dhcp hosts' macaddr vs. ipaddr mappings to
static file and make dnsmasq loading it with "--dhcp-hostsfile" option,
originally suggested by Dan, and can address the problem that too
many "--dhcp-host" args hitting ARG_MAX limit

* src/util/dnsmasq.h src/util/dnsmasq.c: adds the 2 new files

new method generated files are missing from dist tarball.

We were forgetting to release the memory allocated by
virDomainSnapshotListNames.  Free the memory properly.
Signed-off-by: NChris Lalancette <clalance@redhat.com>

While doing some testing of the snapshot code I noticed that
if qemuDomainSnapshotLoad failed, it would print a NULL as
part of the error.  That's not desirable, so leave the
full_path variable around until after we are done printing
errors.
Signed-off-by: NChris Lalancette <clalance@redhat.com>