In case qemu supports -nodefconfig, libvirt adds uses it when launching
new guests. Since this option may affect CPU models supported by qemu,
we need to use it when probing for available models.

pod2man prints the following warning when generating virsh.1:

    tools/virsh.pod:890: Unmatched =back

An indentation mistake meant that a check for return status
was not properly performed in all cases. This could result
in a crash on NULL pointer in a following line.

* src/qemu/qemu_monitor_json.c: Fix check for return status
  when processing JSON for blockstats

Some versions of pod2man do not support the -u flag, so this
can't be used

* daemon/Makefile.am: Remove -u flag from pod2man

A missing return statement in the python binding meant that
the callers could not get the callback ID, and thus not be
able to unregister event callbacks

* python/libvirt-override-virConnect.py: Add missing return
  statement

With gracious thanks to Chris Lalancette for helping knock the
description section into shape.

This addresses BZ #595350

  https://bugzilla.redhat.com/show_bug.cgi?id=595350

This patch adds a new --details option to the virsh vol-list
command, making its output more useful when many luns are
present.

Addresses BZ # 605543

  https://bugzilla.redhat.com/show_bug.cgi?id=605543

Signed-off-by: NChris Lalancette <clalance@redhat.com>

Signed-off-by: NChris Lalancette <clalance@redhat.com>

By specifying <vendor> element in CPU requirements a guest can be
restricted to run only on CPUs by a given vendor. Host CPU vendor is
also specified in capabilities XML.

The vendor is checked when migrating a guest but it's not forced, i.e.,
guests configured without <vendor> element can be freely migrated.

In case the set of CPUs has no features in common, report incompatible
CPUs instead of returning the simplest CPU model with all features
disabled.

All features in the baseline CPU definition were always created with
policy='require' even though an arch driver returned them with different
policy settings.

- configure.ac docs/news.html.in libvirt.spec.in: updated
- po/*/o* : updated or.po and regenerated

This allows the user to give an explicit path to configure

  ./configure --with-vbox=/path/to/virtualbox

instead of having the VirtualBox driver probe a set of possible
paths at runtime. If no explicit path is specified then configure
probes the set of "known" paths.

https://bugzilla.redhat.com/show_bug.cgi?id=609185

We only use libpciaccess for resolving device product/vendor. If
initializing the library fails (say if using qemu:///session), don't
warn so loudly, and carry on as usual.

Log some info if we can't find a config file. Make parse failures
fatal, and actually raise an error message.

Any error message raised after the process has forked needs
to be followed by virDispatchError, otherwise we have no chance of
ever seeing it. This was selectively done for hook functions in the past,
but really applies to all post-fork errors.

As pointed out by Eric Blake, using dirent->d_type breaks
compilation on MinGW. This patch addresses this by using
'#if defined' as same as doing for virCgroupForDriver.

https://bugzilla.redhat.com/show_bug.cgi?id=609044 complained
that 'virsh help pool-create-as' didn't document the shortcut
that you can do 'virsh pool-create-as $name $type --target $target'
rather than having to supply the four optional source- arguments
in order to fill out the necessary positional arguments.

This one-liner changes the help output to hopefully make this more obvious:

  NAME
    pool-create-as - create a pool from a set of args

  SYNOPSIS
    pool-create-as <name> [--print-xml] <type> [<source-host>] [<source-path>] [<source-dev>] [<source-name>] [<target>] [--source-format <string>]

  DESCRIPTION
    Create a pool.

  OPTIONS
    [--name] <string>  name of the pool
    --print-xml      print XML document, but don't define/create
    [--type] <string>  type of the pool
    [--source-host] <string>  source-host for underlying storage
    [--source-path] <string>  source path for underlying storage
    [--source-dev] <string>  source device for underlying storage
    [--source-name] <string>  source name for underlying storage
    [--target] <string>  target for underlying storage
    --source-format <string>  format for underlying storage

* tools/virsh.c (vshCmddefHelp): Make it more obvious that data
arguments may, but not must, be specified by option leaders.

Some, but not all, codepaths in the qemuMonitorOpen() method
would trigger the destroy callback. The caller does not expect
this to be invoked if construction fails, only during normal
release of the monitor. This resulted in a possible double-unref
of the virDomainObjPtr, because the caller explicitly unrefs
the virDomainObjPtr  if qemuMonitorOpen() fails

* src/qemu/qemu_monitor.c: Don't invoke destroy callback from
  qemuMonitorOpen() failure paths

ENOENT happens normally when a subsystem is enabled with any other
subsystems and the directory of the target group has already removed
in a prior loop. In that case, the function should just return without
leaving an error message.

NB this is the same behavior as before introducing virCgroupRemoveRecursively.

Make sure to *not* call qemuDomainPCIAddressReleaseAddr if
QEMUD_CMD_FLAG_DEVICE is *not* set (for older qemu).  This
prevents a crash when trying to do device detachment from
a qemu guest.
Signed-off-by: NChris Lalancette <clalance@redhat.com>

In the current libvirt PCI code, there is no checking whether
a PCI device is in use by a guest when doing node device
detach or reattach.  This causes problems when a device is
assigned to a guest, and the administrator starts issuing
nodedevice commands.  Make it so that we check the list
of active devices when trying to detach/reattach, and only
allow the operation if the device is not assigned to a guest.
Signed-off-by: NChris Lalancette <clalance@redhat.com>

This patch adds a new --details option to the virsh pool-list
command, making its output more useful to people who use virsh
for significant lengths of time.

Addresses BZ # 605543

  https://bugzilla.redhat.com/show_bug.cgi?id=605543

https://bugzilla.redhat.com/show_bug.cgi?id=608092

* src/util/util.c (virFileResolveLink): Use
canonicalize_file_name, rather than areadlink.

Fix regression introduced in commit a4a28724 - basically, the
phyp storage driver should only accept the same URIs that the
main phyp driver is willing to accept.  Blindly accepting all
URIs meant that the phyp storage driver was being consulted for
'virsh -c qemu:///session pool-list --all', rather than the
qemu storage driver, then since the URI was not for phyp, attempts
to then use the phyp driver crashed because it was not initialized.

* src/phyp/phyp_driver.c (phypStorageOpen): Only accept connections
already open to a phyp driver.

This code was just recently added (by me) and didn't account for the
fact that stdin_path is sometimes NULL. If it's NULL, and
SetSecurityAllLabel fails, a segfault would result.

Because tty path is unexpectedly not saved in the live configuration
file of a domain, libvirtd cannot get the console of the domain back
after restarting.

The reason why the tty path isn't saved is that, to save the tty path,
the save function, virDomainSaveConfig, requires that the target domain
is running (pid != -1), however, lxc driver calls the function before
starting the domain to pass the configuration to controller.

To ensure to save the tty path, the patch lets lxc driver call the save
function again after starting the domain.

The function is expected to return negative value on failure,
however, it returns positive value when either setInterfaceName
or vethInterfaceUpOrDown fails. Because the function returns
the return value of either as is, however, the two functions
may return positive value on failure.

The patch fixes the defects and add error messages.

The message is actually not of error but of debugging.
02:22:56.091: error : lxcControllerMain:316 : monitor=3 client=4 appPty=19 contPty=7

When the saved domain image is on an NFS share, at least some part of
domainSetSecurityAllLabel will fail (for example, selinux labels can't
be modified). To allow domain restore to still work in this case, just
ignore the errors.

Previously, this function had it's own bit of code performing the same
function. Since there's now an equivalent utility function, let's use it.

virStorageFileIsSharedFS would previously only work if the entire path
in question was stat'able by the uid of the libvirtd process. This
patch changes it to crawl backwards up the path retrying the statfs
call until it gets to a partial path that *can* be stat'ed.

This is necessary to use the function to learn the fstype for files
stored as a different user (and readable only by that user) on a
root-squashed remote filesystem.

Also restore the label to its original value after qemu is finished
with the file.

Prior to this patch, qemu domain restore did not function properly if
selinux was set to enforce.

(EXTRA_DIST): Remove redundant listing of xml files.
(html/%-%.html, html/%-virterror.html, %-api.xml, %-refs.xml):
Rewrite with...
(python_generated_files): ...new macro, since make didn't see
through the dependency chain correctly otherwise.