The previous patches only cleaned up ATTRIBUTE_UNUSED flags cases;
auditing the drivers found other places where flags was being used
but not validated.  In particular, domainGetXMLDesc had issues with
clients accepting a different set of flags than the common
virDomainDefFormat helper function.

* src/conf/domain_conf.c (virDomainDefFormat): Add common flag check.
* src/uml/uml_driver.c (umlDomainAttachDeviceFlags)
(umlDomainDetachDeviceFlags): Reject unknown
flags.
* src/vbox/vbox_tmpl.c (vboxDomainGetXMLDesc)
(vboxDomainAttachDeviceFlags)
(vboxDomainDetachDeviceFlags): Likewise.
* src/qemu/qemu_driver.c (qemudDomainMemoryPeek): Likewise.
(qemuDomainGetXMLDesc): Document common flag handling.
* src/libxl/libxl_driver.c (libxlDomainGetXMLDesc): Likewise.
* src/lxc/lxc_driver.c (lxcDomainGetXMLDesc): Likewise.
* src/openvz/openvz_driver.c (openvzDomainGetXMLDesc): Likewise.
* src/phyp/phyp_driver.c (phypDomainGetXMLDesc): Likewise.
* src/test/test_driver.c (testDomainGetXMLDesc): Likewise.
* src/vmware/vmware_driver.c (vmwareDomainGetXMLDesc): Likewise.
* src/xenapi/xenapi_driver.c (xenapiDomainGetXMLDesc): Likewise.

This patch extends qemudDomainSetVcpusFlags() function to support
VIR_DOMAIN_AFFECT_CURRENT flag.
Signed-off-by: NTaku Izumi <izumi.taku@jp.fujitsu.com>

* src/qemu/qemu_driver.c (qemudOpen, qemuDomainScreenshot)
(qemuDomainXMLFromNative, qemuDomainXMLToNative)
(qemudDomainBlockPeek, qemuCPUCompare, qemuCPUBaseline): Reject
unknown flags.
* src/qemu/qemu_migration.c (qemuMigrationConfirm): Likewise.
(_qemuMigrationCookie, qemuMigrationCookieXMLParse)
(qemuMigrationCookieXMLParseStr, qemuMigrationBakeCookie)
(qemuMigrationEatCookie): Make flags unsigned.
* src/qemu/qemu_domain.h: (qemuDomainDefFormatXML)
(qemuDomainFormatXML): Prefer unsigned flags.
* src/qemu/qemu_domain.c (qemuDomainDefFormatXML)
(qemuDomainFormatXML): Likewise.
(qemuDomainOpenLogHelper, qemuDomainCreateLog): Rename variable.

While compiling on F15 build crashed (probably because of new GCC).

If libvirtd is restarted when a job is running, the new libvirtd process
needs to know about that to be able to recover and rollback the
operation.

Query commands are safe to be called during long running jobs (such as
migration). This patch makes them all work without the need to
special-case every single one of them.

The patch introduces new job.asyncCond condition and associated
job.asyncJob which are dedicated to asynchronous (from qemu monitor
point of view) jobs that can take arbitrarily long time to finish while
qemu monitor is still usable for other commands.

The existing job.active (and job.cond condition) is used all other
synchronous jobs (including the commands run during async job).

Locking schema is changed to use these two conditions. While asyncJob is
active, only allowed set of synchronous jobs is allowed (the set can be
different according to a particular asyncJob) so any method that
communicates to qemu monitor needs to check if it is allowed to be
executed during current asyncJob (if any). Once the check passes, the
method needs to normally acquire job.cond to ensure no other command is
running. Since domain object lock is released during that time, asyncJob
could have been started in the meantime so the method needs to recheck
the first condition. Then, normal jobs set job.active and asynchronous
jobs set job.asyncJob and optionally change the list of allowed job
groups.

Since asynchronous jobs only set job.asyncJob, other allowed commands
can still be run when domain object is unlocked (when communicating to
remote libvirtd or sleeping). To protect its own internal synchronous
commands, the asynchronous job needs to start a special nested job
before entering qemu monitor. The nested job doesn't check asyncJob, it
only acquires job.cond and sets job.active to block other jobs.

The LXC and UML drivers can both make use of auditing. Move
the qemu_audit.{c,h} files to src/conf/domain_audit.{c,h}

* src/conf/domain_audit.c: Rename from src/qemu/qemu_audit.c
* src/conf/domain_audit.h: Rename from src/qemu/qemu_audit.h
* src/Makefile.am: Remove qemu_audit.{c,h}, add domain_audit.{c,h}
* src/qemu/qemu_audit.h, src/qemu/qemu_cgroup.c,
  src/qemu/qemu_command.c, src/qemu/qemu_driver.c,
  src/qemu/qemu_hotplug.c, src/qemu/qemu_migration.c,
  src/qemu/qemu_process.c: Update for changed audit API names

Given a PID, the QEMU driver reads /proc/$PID/cmdline and
/proc/$PID/environ to get the configuration. This is fed
into the ARGV->XML convertor to build an XML configuration
for the process.

/proc/$PID/exe is resolved to identify the full command
binary path

After checking for name/uuid uniqueness, an attempt is
made to connect to the monitor socket. If successful
then 'info status' and 'info kvm' are issued to determine
whether the CPUs are running and if KVM is enabled.

* src/qemu/qemu_driver.c: Implement virDomainQemuAttach
* src/qemu/qemu_process.h, src/qemu/qemu_process.c: Add
  qemuProcessAttach to connect to the monitor of an
  existing QEMU process

When converting QEMU argv into a virDomainDefPtr, also extract
the pidfile, monitor character device config and the monitor
mode.

* src/qemu/qemu_command.c, src/qemu/qemu_command.h: Extract
  pidfile & monitor config from QEMU argv
* src/qemu/qemu_driver.c, tests/qemuargv2xmltest.c: Add extra
  params when calling qemuParseCommandLineString

* src/qemu/qemu_driver.c (doCoreDump): Guarantee fd is closed.

The drivers were accepting domain configs without checking if those
were actually meant for them. For example the LXC driver happily
accepts configs with type QEMU.

Add a check for the expected domain types to the virDomainDefParse*
functions.

When dynamic ownership is disabled we don't want to chown any files,
not just local.

Now that the public APIs always use unsigned flags, the internal
driver callbacks might as well do likewise.

* src/driver.h (vrDrvOpen, virDrvDomainCoreDump)
(virDrvDomainGetXMLDesc, virDrvNetworkGetXMLDesc)
(virDrvNWFilterGetXMLDesc): Update type.
* src/remote/remote_protocol.x (remote_open_args)
(remote_domain_core_dump_args, remote_domain_get_xml_desc_args)
(remote_network_get_xml_desc_args)
(remote_nwfilter_get_xml_desc_args): Likewise.
* src/test/test_driver.c: Update clients.
* src/remote/remote_driver.c: Likewise.
* src/xen/xen_hypervisor.c: Likewise.
* src/xen/xen_hypervisor.h: Likewise.
* src/xen/xen_driver.c: Likewise.
* src/xen/xend_internal.c: Likewise.
* src/xen/xend_internal.h: Likewise.
* src/xen/xm_internal.c: Likewise.
* src/xen/xm_internal.h: Likewise.
* src/xen/xs_internal.c: Likewise.
* src/xen/xs_internal.h: Likewise.
* src/xen/xen_inotify.c: Likewise.
* src/xen/xen_inotify.h: Likewise.
* src/phyp/phyp_driver.c: Likewise.
* src/openvz/openvz_driver.c: Likewise.
* src/vmware/vmware_driver.c: Likewise.
* src/vbox/vbox_driver.c: Likewise.
* src/vbox/vbox_tmpl.c: Likewise.
* src/xenapi/xenapi_driver.c: Likewise.
* src/esx/esx_driver.c: Likewise.
* src/esx/esx_interface_driver.c: Likewise.
* src/esx/esx_network_driver.c: Likewise.
* src/esx/esx_storage_driver.c: Likewise.
* src/esx/esx_device_monitor.c: Likewise.
* src/esx/esx_secret_driver.c: Likewise.
* src/esx/esx_nwfilter_driver.c: Likewise.
* src/interface/netcf_driver.c: Likewise.
* src/nwfilter/nwfilter_driver.c: Likewise.
* src/libxl/libxl_driver.c: Likewise.
* src/qemu/qemu_driver.c: Likewise.
* src/lxc/lxc_driver.c: Likewise.
* src/uml/uml_driver.c: Likewise.
* src/network/bridge_driver.c: Likewise.
* src/secret/secret_driver.c: Likewise.
* src/storage/storage_driver.c: Likewise.
* src/node_device/node_device_hal.c: Likewise.
* src/node_device/node_device_udev.c: Likewise.
* src/remote_protocol-structs: Likewise.

Some callers expected virFileMakePath to set errno, some expected
it to return an errno value. Unify this to return 0 on success and
-1 on error. Set errno to report detailed error information.

Also optimize virFileMakePath if stat fails with an errno different
from ENOENT.

add a new API pciDeviceReAttachInit() in pci.c to initialize state values for nodedev reattach

Initialize three state value of device driver to 1. This is just for a new call to
qemudNodeDeviceReAttach()

Although most functions with flags check to verify no application is
passing in flag bits that are currently undefined, for some reason
this function wasn't.

virFileMakePath returns an errno value on error, that will never
be negative. An virFileMakePath error would have been ignored here,
instead of being reported correctly.

The qemudDomainSaveFlag method will call EndJob on the 'vm'
object it is passed in. This can result in the 'vm' object
being free'd if the last reference is removed. Thus no caller
of 'qemudDomainSaveFlag' must *ever* reference 'vm' again
upon return.

Unfortunately qemudDomainSave and qemuDomainManagedSave
both call 'virDomainObjUnlock', which can result in a
crash. This is non-deterministic since it involves a race
with the monitor I/O thread.

Fix this by making qemudDomainSaveFlag responsible for
calling virDomainObjUnlock instead.

* src/qemu/qemu_driver.c: Fix potential use after free
  when saving guests

If we pass VIR_DOMAIN_AFFECT_LIVE | VIR_DOMAIN_AFFECT_CONFIG to
qemuGetSchedulerParametersFlags() or *nparams is less than 1,
we will unlock qemu_driver without locking it. It's very dangerous.

We should lock qemu_driver after calling virCheckFlags().

We should save domain status after modifing vcpupin. If not,
we will get wrong vcpupin information after rebooting libvirtd.

Although we create a temporary file, it is owned by root:root and have
rights 0600. In case qemu does not run under root, it is unable to write
to that file and thus we transfer 0B sized file.

When CURRENT and FORCE flags were used together, UpdateDeviceFlags did
nothing because it failed to transform CURRENT into either LIVE or
CONFIG.

We already have a public virDomainPinVcpu, which implies that
Pin and Vcpu are treated as separate words.  Unreleased commit
e261987c introduced virDomainGetVcpupinInfo as the first public
API that used Vcpupin, although we had prior internal uses of
that spelling.  For consistency, change the spelling to be two
words everywhere, regardless of whether pin comes first or last.

* daemon/remote.c: Treat vcpu and pin as separate words.
* include/libvirt/libvirt.h.in: Likewise.
* src/conf/domain_conf.c: Likewise.
* src/conf/domain_conf.h: Likewise.
* src/driver.h: Likewise.
* src/libvirt.c: Likewise.
* src/libvirt_private.syms: Likewise.
* src/libvirt_public.syms: Likewise.
* src/libxl/libxl_driver.c: Likewise.
* src/qemu/qemu_driver.c: Likewise.
* src/remote/remote_driver.c: Likewise.
* src/xen/xend_internal.c: Likewise.
* tools/virsh.c: Likewise.
* src/remote/remote_protocol.x: Likewise.
* src/remote_protocol-structs: Likewise.
Suggested by Matthias Bolte.

Caught by gcc -O2, during autobuild.sh.

* src/qemu/qemu_driver.c (qemudDomainGetVcpupinInfo): Initialize vm.

This patch implements the code to address the new API (virDomainGetVcpupinInfo)
in the qemu driver.
Signed-off-by: NTaku Izumi <izumi.taku@jp.fujitsu.com>

This reverts commit 784ee08d.

If an application is using libvirt + KVM as a piece of its
internal infrastructure to perform a specific task, it can
be desirable to guarentee the VM dies when the virConnectPtr
disconnects from libvirtd. This ensures the app can't leak
any VMs it was using. Adding VIR_DOMAIN_START_AUTOKILL as
a flag when starting guests enables this to be done.

* include/libvirt/libvirt.h.in: All VIR_DOMAIN_START_AUTOKILL
* src/qemu/qemu_driver.c: Support automatic killing of guests
  upon connection close
* tools/virsh.c: Add --autokill flag to 'start' and 'create'
  commands

Sometimes it is useful to be able to automatically destroy a guest when
a connection is closed. For example, kill an incoming migration if
the client managing the migration dies. This introduces a map between
guest 'uuid' strings and virConnectPtr objects. When a connection is
closed, any associated guests are killed off.

* src/qemu/qemu_conf.h: Add autokill hash table to qemu driver
* src/qemu/qemu_process.c, src/qemu/qemu_process.h: Add APIs
  for performing autokill of guests associated with a connection
* src/qemu/qemu_driver.c: Initialize autodestroy map

For controlled shutdown we issue a 'system_powerdown' command
to the QEMU monitor. This triggers an ACPI event which (most)
guest OS wire up to a controlled shutdown. There is no equiv
ACPI event to trigger a controlled reboot. This patch attempts
to fake a reboot.

 - In qemuDomainObjPrivatePtr we have a bool fakeReboot
   flag.
 - The virDomainReboot method sets this flag and then
   triggers a normal 'system_powerdown'.
 - The QEMU process is started with '-no-shutdown'
   so that the guest CPUs pause when it powers off the
   guest
 - When we receive the 'POWEROFF' event from QEMU JSON
   monitor if fakeReboot is not set we invoke the
   qemuProcessKill command and shutdown continues
   normally
 - If fakeReboot was set, we spawn a background thread
   which issues 'system_reset' to perform a warm reboot
   of the guest hardware. Then it issues 'cont' to
   start the CPUs again

* src/qemu/qemu_command.c: Add -no-shutdown flag if
  we have JSON support
* src/qemu/qemu_domain.h: Add 'fakeReboot' flag to
  qemuDomainObjPrivate struct
* src/qemu/qemu_driver.c: Fake reboot using the
  system_powerdown command if JSON support is available
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
  src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h,
  src/qemu/qemu_monitor_text.c, src/qemu/qemu_monitor_text.h: Add
  binding for system_reset command
* src/qemu/qemu_process.c: Reset the guest & start CPUs if
  fakeReboot is set

GCC complained about a C99 for-loop declaration outside of C99 mode
when compiling on RHEL 5.

* src/qemu/qemu_driver.c (qemudDomainPinVcpuFlags): Avoid C99 for
loop, since gcc 4.1.2 hates it.

Since we virEventRegisterDefaultImpl is now a public API, callers need
a way to invoke the default registered Handle and Timeout functions. We
already have general functions for these internally, so promote
them to the public API.

v2:
    Actually add APIs to libvirt.h

Pinning to all physical cpus means resetting, hence it is preferable to
delete vcpupin setting of XML.

This patch changes qemu driver to delete vcpupin setting by invoking
virDomainVcpupinDel API when pinning the specified virtual cpu to
all host physical cpus.
Signed-off-by: NTaku Izumi <izumi.taku@jp.fujitsu.com>

The virDomainBlockPull* family of commands are enabled by the
'block_stream' and 'info block_stream' qemu monitor commands.

* src/qemu/qemu_driver.c src/qemu/qemu_monitor_text.[ch]: implement disk
  streaming by using the stream and info stream text monitor commands
* src/qemu/qemu_monitor_json.[ch]: implement commands using the qmp monitor
Signed-off-by: NAdam Litke <agl@us.ibm.com>
Acked-by: NDaniel P. Berrange <berrange@redhat.com>

Signed-off-by: NMinoru Usui <usui@mxm.nes.nec.co.jp>

Signed-off-by: NMinoru Usui <usui@mxm.nes.nec.co.jp>

This patch deprecates following enums:

VIR_DOMAIN_MEM_CURRENT
VIR_DOMAIN_MEM_LIVE
VIR_DOMAIN_MEM_CONFIG

VIR_DOMAIN_VCPU_LIVE
VIR_DOMAIN_VCPU_CONFIG

VIR_DOMAIN_DEVICE_MODIFY_CURRENT
VIR_DOMAIN_DEVICE_MODIFY_LIVE
VIR_DOMAIN_DEVICE_MODIFY_CONFIG

And modify internal codes to use virDomainModificationImpact.