- 04 8月, 2012 4 次提交
-
-
由 Peter Krempa 提交于
Commit ba226d33 tried to fix crash of the daemon when a domain with an open console was destroyed. The fix was wrong as it tried to remove the callback also when the stream was aborted, where at that point the fd stream driver was already freed and removed. This patch clears the callbacks with a helper right before the hash is freed, so that it doesn't interfere with other codepaths where the stream object is freed.
-
由 Peter Krempa 提交于
The last message of the client was not freed leaking 4 bytes of memory in the client when the remote daemon crashed while processing a message.
-
由 Ata E Husain Bohra 提交于
Append "Byte" to set of predefined datatype objects. Signed-off-by: NAta E Husain Bohra <ata.husain@hotmail.com>
-
由 Eric Blake 提交于
Without this patch, the English phrase 'no name' would appear literally within the remaining translated message. * src/parallels/parallels_driver.c (parallelsCreateVm) (parallelsDomainDefineXML): Tweak error message.
-
- 03 8月, 2012 10 次提交
-
-
由 Laine Stump 提交于
make rpm was failing with the following error: Entering directory `/home/laine/devel/libvirt/tests' make[2]: *** No rule to make target `viratomicdata.h', needed by `distdir'. Stop. viratomicdata.h is listed in tests/Makefile.am as a dependency of viratomictest, but doesn't exist, is never referenced, and removing that dependency permits make rpm to complete successfully.
-
由 Daniel P. Berrange 提交于
-
由 Daniel P. Berrange 提交于
-
由 Peter Krempa 提交于
The stream object wasn't set to NULL after freeing causing a double free attempt on the cleanup path.
-
由 Peter Krempa 提交于
The remote driver did not fill the required snapshot parent argument in the RPC call structure that caused a client crash when trying to use this new API.
-
由 Osier Yang 提交于
* src/conf/domain_conf.c: - Add virDomainControllerFind to find controller device by type and index. - Add virDomainControllerRemove to remove the controller device from maintained controler list. * src/conf/domain_conf.h: - Declare the two new helpers. * src/libvirt_private.syms: - Expose private symbols for the two new helpers. * src/qemu/qemu_driver.c: - Support attach/detach controller device persistently * src/qemu/qemu_hotplug.c: - Use the two helpers to simplify the codes.
-
由 Hendrik Schwartke 提交于
The access, birth, modification and change times are added to storage volumes and corresponding xml representations. This shows up in the XML in this format: <timestamps> <atime>1341933637.027319099</atime> <mtime>1341933637.027319099</mtime> </timestamps> Signed-off-by: NEric Blake <eblake@redhat.com>
-
由 Ján Tomko 提交于
capability.rng: Guest features can be in any order. nodedev.rng: Added <driver> element, <capability> phys_function and virt_functions for PCI devices. storagepool.rng: Owner or group ID can be -1. schema tests: New capabilities and nodedev files; changed owner and group to -1 in pool-dir.xml. storage_conf: Print uid_t and gid_t as signed to storage pool XML.
-
由 Eric Blake 提交于
The recent changes to the testsuite to validate exported symbols flushed out a case of unconditionally exporting symbols that were only conditionally compiled under HAVE_AVAHI. * src/Makefile.am (libvirt_net_rpc_server_la_SOURCES): Compile virnetservermdns unconditionally. * configure.ac (HAVE_AVAHI): Drop unused automake conditional. * src/rpc/virnetservermdns.c: Add fallbacks when Avahi is not present.
-
由 Michal Privoznik 提交于
Since we've introduced close callbacks we can drop this SIGINT magic (which doesn't work now neither) and fully utilize the new feature.
-
- 02 8月, 2012 15 次提交
-
-
由 Michal Privoznik 提交于
One of our latest commits fbe87126 introduced this nasty typo: func(vmdef, ...); where func() dereference vmdef->ncontrollers, and vmdef was initialized to NULL. This leaves us with unconditional immediate segfault. It should be vm->def instead.
-
由 Jiri Denemark 提交于
When running libvirtd from a build directory on a system with unmodified libtool, libvirtd's binary is not renamed as "lt-libvirtd". Check for "/daemon/.libs/libvirtd" in addition to "lt-libvirtd".
-
由 Jiri Denemark 提交于
Security manager is not a dynamically loadable driver. Let's avoid the confusion by renaming libvirt_driver_security library as libvirt_security_manager.
-
由 Jiri Denemark 提交于
Security manager is not a dynamically loadable driver, it's a common infrastructure similar to util, conf, cpu, etc. used by individual drivers. Such code is allowed to be linked into libvirt.so. This reverts commit ec5b7bd2 and most of aae5cfb6. This patch is supposed to fix virdrivermoduletest failures for qemu and lxc drivers as well as libvirtd's ability to load qemu and lxc drivers.
-
由 Daniel P. Berrange 提交于
On Debian/Ubuntu, one of the libraries libvirt (indirectly) links with exports a symbol named 'base64_encode'. This takes precedence over GNULIB's base64_encode function during linking. Unfortunately they of course have different API semantics. To avoid this problem use a few #defines in config.h to rename the GNULIB provided function to have a 'libvirt_gl_' prefix
-
由 Eric Blake 提交于
With 0.10.0-rc0 out the door, we are committed to the next version number. * src/libvirt_public.syms (LIBVIRT_0.9.14): Rename... (LIBVIRT_0.10.0): ...to this. * docs/formatdomain.html.in: Fix fallout. * src/openvz/openvz_driver.c (openvzDriver): Likewise. * src/remote/remote_driver.c (remote_driver): Likewise.
-
由 Daniel P. Berrange 提交于
Several APIs in src/datatypes.c were formatting an UUID to a uuidstr variable and then not using it.
-
由 Daniel P. Berrange 提交于
There are a few issues with the current virAtomic APIs - They require use of a virAtomicInt struct instead of a plain int type - Several of the methods do not implement memory barriers - The methods do not implement compiler re-ordering barriers - There is no Win32 native impl The GLib library has a nice LGPLv2+ licensed impl of atomic ops that works with GCC, Win32, or pthreads.h that addresses all these problems. The main downside to their code is that the pthreads impl uses a single global mutex, instead of a per-variable mutex. Given that it does have a Win32 impl though, we don't expect anyone to seriously use the pthread.h impl, so this downside is not significant. * .gitignore: Ignore test case * configure.ac: Check for which atomic ops impl to use * src/Makefile.am: Add viratomic.c * src/nwfilter/nwfilter_dhcpsnoop.c: Switch to new atomic ops APIs and plain int datatype * src/util/viratomic.h: inline impls of all atomic ops for GCC, Win32 and pthreads * src/util/viratomic.c: Global pthreads mutex for atomic ops * tests/viratomictest.c: Test validate to validate safety of atomic ops. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Daniel P. Berrange 提交于
Remove the use of a manually run virLogStartup and virNodeSuspendInitialize methods. Instead make sure they are automatically run using VIR_ONCE_GLOBAL_INIT Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Peter Krempa 提交于
This patch enables the "none" USB controller for qemu guests and adds valdiation on hot-plugged devices if the guest has USB disabled. This patch also adds a set of tests to check parsing of domain XMLs that use the "none" controller and some forbidden situations concerning it.
-
由 Peter Krempa 提交于
This patch adds helpers that validate domain's device configuration. This will be needed later on to verify devices being hot-plugged to guests. If the guest has no USB bus, then it's not valid to plug a USB device to that guest.
-
由 Peter Krempa 提交于
Libvirt adds a USB controller to the guest even if the user does not specify any in the XML. This is due to back-compat reasons. To allow disabling USB for a guest this patch adds a new USB controller type "none" that disables USB support for the guest.
-
由 Osier Yang 提交于
Some of the macros use tab, while the left use spaces, this patch change it to always use the spaces. And a few aligning fixes.
-
由 Guannan Ren 提交于
The option 'srcSpec' to virsh command find-storage-pool-sources is optional for logical type of storage pool, but mandatory for netfs and iscsi type. When missing the option for netfs and iscsi, libvirt reports XML parsing error due to null string option srcSpec. before error: Failed to find any netfs pool sources error: (storage_source_specification):1: Document is empty (null) after: error: pool type 'iscsi' requires option --srcSpec for source discovery
-
由 Gerd v. Egidy 提交于
-
- 01 8月, 2012 11 次提交
-
-
由 Michal Privoznik 提交于
One of our latest patches added some files to .gitignore. However, not in the right place leaving the file not sorted. Since my git is set up to sort these files contents, fix this issue as it keeps showing up in git status.
-
由 Jiri Denemark 提交于
-
由 Jiri Denemark 提交于
Commit aae5cfb6 removed security driver from libvirt_la but forgot to link it into libvirtd in case libvirt is built without modules.
-
由 Daniel Veillard 提交于
The 'make check' was rebuilding the binaries just overrided, so for more safety also override the C program Also daemon-conf isn't built anymore so remove it from the list
-
由 Daniel Veillard 提交于
Otherwise the file is missing from the dist tarball and distcheck fails
-
由 Dmitry Guryanov 提交于
To create a new VM in Parallels Clud Server we should issue "prlctl create" command, and give path to the directory, where VM should be created. VM's storage will be in that directory later. So in this first version find out location of first VM's hard disk and create VM there. Signed-off-by: NDmitry Guryanov <dguryanov@parallels.com>
-
由 Dmitry Guryanov 提交于
Parallels Cloud Server has one serious discrepancy with libvirt: libvirt stores domain configuration files in one place, and storage files in other places (with the API of storage pools and storage volumes). Parallels Cloud Server stores all domain data in a single directory, for example, you may have domain with name fedora-15, which will be located in '/var/parallels/fedora-15.pvm', and it's hard disk image will be in '/var/parallels/fedora-15.pvm/harddisk1.hdd'. I've decided to create storage driver, which produces pseudo-volumes (xml files with volume description), and they will be 'converted' to real disk images after attaching to a VM. So if someone creates VM with one hard disk using virt-manager, at first virt-manager creates a new volume, and then defines a domain. We can lookup a volume by path in XML domain definition and find out location of new domain and size of its hard disk. Signed-off-by: NDmitry Guryanov <dguryanov@parallels.com>
-
由 Dmitry Guryanov 提交于
Add parallelsDomainDefineXML function, it works only for existing domains for the present. It's too hard to convert libvirt's XML domain configuration into Parallel's one, so I've decided to compare virDomainDef structures: current domain definition and the one created from XML, given to the function. And change only different parameters. Currently only name, description, number of cpus, memory amount and video memory can be changed. Video device and console added, because libvirt supposes that VM must always have one video device, if there are some graphics and one console. Signed-off-by: NDmitry Guryanov <dguryanov@parallels.com>
-
由 Dmitry Guryanov 提交于
Add support for reading VNC parameters of the VM. Signed-off-by: NDmitry Guryanov <dguryanov@parallels.com>
-
由 Dmitry Guryanov 提交于
Add support of collecting information about serial ports. This change is needed mostly as an example, support of other devices will be added later. Signed-off-by: NDmitry Guryanov <dguryanov@parallels.com>
-
由 Dmitry Guryanov 提交于
Add functions for create/shutdown/destroy and suspend/resume domain. Signed-off-by: NDmitry Guryanov <dguryanov@parallels.com>
-