Move the code that formats the /domain/cpu/numa element to numa_conf as
it belongs there.

The mask was stored both as a bitmap and as a string. The string is used
for XML output only. Remove the string, as it can be reconstructed from
the bitmap.

The test change is necessary as the bitmap formatter doesn't "optimize"
using the '^' operator.

Rewrite the function to save a few local variables and reorder the code
to make more sense.

Additionally the ncells_max member of the virCPUDef structure is used
only for tracking allocation when parsing the numa definition, which can
be avoided by switching to VIR_ALLOC_N as the array is not resized
after initial allocation.

For weird historical reasons NUMA cells are added as a subelement of
<cpu> while the actual configuration is done in <numatune>.

This patch splits out the cell parser code from cpu config to NUMA
config. Note that the changes to the code are minimal just to make it
work and the function will be refactored in the next patch.

For a while now there are two places that gather information about NUMA
related guest configuration. While the XML can't be changed we can at
least store the data in one place in the definition.

Rename the numatune_conf.[ch] files to numa_conf as later patches will
move the rest of the definitions from the cpu definition to this one.

This function is going to be needed in the near future.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Extract the logic to determine which nodeset has to be used for a domain
from the formatting step so that it can be reused separately when the
nodeset is used in a different way.

After virBitmapEqual is able to compare NULL bitmaps few bits of code
can be cleaned up.

This is a reaction to Michal's fix [1] for non-NUMA systems that also
splits out conf/ out of util/ because libvirt_util shouldn't require
libvirt_conf if it is the other way around.  This particular use case
worked, but we're trying to avoid it as mentioned [2], many times.

The only functions from virnuma.c that needed numatune_conf were
virDomainNumatuneNodesetIsAvailable() and virNumaSetupMemoryPolicy().
The first one should be in numatune_conf as it works with
virDomainNumatune, the second one just needs nodeset and mode, both of
which can be passed without the need of numatune_conf.

Apart from fixing that, this patch also fixes recently added
code (between commits d2460f85^..5c851562) that doesn't support
non-contiguous nodesets.  It uses new function
virNumaNodesetIsAvailable(), which doesn't need a stub as it doesn't use
any libnuma functions, to check if every specified nodeset is available.

[1] https://www.redhat.com/archives/libvir-list/2014-November/msg00118.html
[2] http://www.redhat.com/archives/libvir-list/2011-June/msg01040.htmlSigned-off-by: NMartin Kletzander <mkletzan@redhat.com>

There was no check for 'nodeset' attribute in numatune-related
elements.  This patch adds validation that any nodeset specified does
not exceed maximum host node.
Signed-off-by: NChen Fan <chen.fan.fnst@cn.fujitsu.com>

I noticed a line 'int nparams = 0;;' in remote_dispatch.h, and
tracked down where it was generated.  While at it, I found a
couple of other double semicolons.  Additionally, I noticed that
commit df0b57a9 left a stale reference to the file name
remote_dispatch_bodies.h.

* src/conf/numatune_conf.c (virDomainNumatuneNodeParseXML): Drop
empty statement.
* tests/virdbustest.c (testMessageStruct, testMessageSimple):
Likewise.
* src/rpc/gendispatch.pl (remote_dispatch_bodies.h): Likewise, and
update stale comments.
Signed-off-by: NEric Blake <eblake@redhat.com>

When trying to set numatune mode directly using virsh numatune command,
correct error is raised, however numatune structure was not deallocated,
thus resulting in creating an empty numatune element in the guest XML,
if none was present before. Running the same command aftewards results
in a successful change with broken XML structure. Patch fixes the
deallocation problem as well as checking for invalid attribute
combination VIR_DOMAIN_NUMATUNE_PLACEMENT_AUTO + a nonempty nodeset.

Resolves https://bugzilla.redhat.com/show_bug.cgi?id=1129998

This patch adds back the virDomainDef typedef into domain_conf and
makes all the numatune_conf functions independent of any virDomainDef
definitions.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

There were numerous places where numatune configuration (and thus
domain config as well) was changed in different ways.  On some
places this even resulted in persistent domain definition not to be
stable (it would change with daemon's restart).

In order to uniformly change how numatune config is dealt with, all
the internals are now accessible directly only in numatune_conf.c and
outside this file accessors must be used.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Since there was already public virDomainNumatune*, I changed the
private virNumaTune to match the same, so all the uses are unified and
public API is kept:

s/vir\(Domain\)\?Numa[tT]une/virDomainNumatune/g

then shrunk long lines, and mainly functions, that were created after
that:

sed -i 's/virDomainNumatuneMemPlacementMode/virDomainNumatunePlacement/g'

And to cope with the enum name, I haad to change the constants as
well:

s/VIR_NUMA_TUNE_MEM_PLACEMENT_MODE/VIR_DOMAIN_NUMATUNE_PLACEMENT/g

Last thing I did was at least a little shortening of already long
name:

s/virDomainNumatuneDef/virDomainNumatune/g
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

There are many places with numatune-related code that should be put
into special numatune_conf and this patch creates a basis for that.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

The qemuxml2argvtest is run on more platforms than linux. For instance
FreeBSD. On these platforms we are, however, not mocking time() which
results in current time being fetched from system and hence tests number
32 and 33 failing.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

When trying to introduce a test for previous patch, I've
noticed that the command line is constructed using current
time. This won't work in our test suite (unless you guys
wants to set a specific time prior to each test run :) ).
Therefore we need to mock calls to time(2) to return the
same value every time it's called.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

https://www.gnu.org/licenses/gpl-howto.html recommends that
the 'If not, see <url>.' phrase be a separate sentence.

* tests/securityselinuxhelper.c: Remove doubled line.
* tests/securityselinuxtest.c: Likewise.
* globally: s/;  If/.  If/

Per the FSF address could be changed from time to time, and GNU
recommends the following now: (http://www.gnu.org/licenses/gpl-howto.html)

  You should have received a copy of the GNU General Public License
  along with Foobar.  If not, see <http://www.gnu.org/licenses/>.

This patch removes the explicit FSF address, and uses above instead
(of course, with inserting 'Lesser' before 'General').

Except a bunch of files for security driver, all others are changed
automatically, the copyright for securify files are not complete,
that's why to do it manually:

  src/security/security_selinux.h
  src/security/security_driver.h
  src/security/security_selinux.c
  src/security/security_apparmor.h
  src/security/security_apparmor.c
  src/security/security_driver.c

Don't require dlopen, but link to ole32 and oleaut32 on Windows.

Don't expose g_pVBoxFuncs anymore. It was only used to get the
version of the API. Make VBoxCGlueInit return the version instead.
This simplifies the implementation of the MSCOM glue layer.

Get the VirtualBox version from the registry.

Add a dummy implementation of the nsIEventQueue to the MSCOM glue
as there seems to be no direct equivalent with MSCOM. It might be
implemented using the normal window message loop. This requires
additional investigation.

Replace 'method' with 'function' and get the filename's suffix right.

* global: patch created by running:
for f in $(git ls-files '*.[ch]') ; do
    cppi $f > $f.t && mv $f.t $f
done

This stops libvirt from probing for a libvirtd on the ESX server and
sets the base for the implementation of the secondary drivers.

* src/bridge.c, src/bridge.h, src/buf.c, src/buf.h, src/cgroup.c,
  src/cgroup.h, src/conf.c, src/conf.h, src/event.c, src/event.h,
  src/hash.c, src/hash.h, src/hostusb.c, src/hostusb.h,
  src/iptables.c, src/iptables.h, src/logging.c, src/logging.h,
  src/memory.c, src/memory.h, src/pci.c, src/pci.h, src/qparams.c,
  src/qparams.h, src/stats_linux.c, src/stats_linux.h,
  src/threads-pthread.c, src/threads-pthread.h, src/threads-win32.c,
  src/threads-win32.h, src/threads.c, src/threads.h, src/util.c,
  src/util.h, src/uuid.c, src/uuid.h, src/virterror.c,
  src/virterror_internal.h, src/xml.c, src/xml.h: Move all files
  into src/util/
* daemon/Makefile.am: Add -Isrc/util/ to build flags
* src/Makefile.am: Add -Isrc/util/ to build flags and update for
  moved files
* src/libvirt_private.syms: Export cgroup APIs since they're now
  in util rather than linking directly to drivers
* src/xen/xs_internal.c: Disable bogus virEventRemoveHandle call
  when built under PROXY
* proxy/Makefile.am: Update for changed file locations. Remove
  bogus build of event.c
* tools/Makefile.am, tests/Makefile.am: Add -Isrc/util/ to build flags

* src/internal.h: move xstrol() variants from here ...

* src/util.[ch]: ... to here and rename to virStrToLong()

* src/libvirt_sym.version: export __virStrToLong_i() for
virsh and qemud.

* src/nodeinfo.c, src/stats_linux.c, src/virsh.c,
  src/xend_internal.c, qemud/qemud.c: replace xstrtol()
calls with virStrToLong()

* src/nodeinfo.h: don't include internal.h, which was only
needed for xstrtol(), but instead include libvirt.h which
is suffificient for the declarations in the header.

  stylesheet
* docs/*: regenerated
* src/bridge.c src/bridge.h src/buf.c src/iptables.c src/libvirt.c
  src/qemu_driver.c src/qemu_driver.h src/uuid.c src/uuid.h: cleanup,
  addd comments, made functions static and fixe a few bugs
Daniel