The instruction "See Makefile.am" in libvirt.private_syms
always makes me think that this file is autogenerated
and should not be touched manually. This patch spares
every reader of libvirt.private_syms the hassle of
reading Makefile.am before augmenting libvirt.private_syms.
Signed-off-by: NWolfgang Mauerer <wolfgang.mauerer@siemens.com>
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>

The configuration file setting is overriden by -f or --config, but
not with -c
Signed-off-by: NWolfgang Mauerer <wolfgang.mauerer@siemens.com>

* libvirt-override.c: Add many missing calls to allow threading
  when entering C code, otherwise python blocks & then deadlocks
  when we have an async event to dispatch back into python code.
  Fix return value check for virDomainPinVcpu binding.

* tests/.valgrind.supp: Ignore capng problems

* src/test/test_driver.c: Fix leak of vcpu info, and nodedevice
  info

* src/qemu/qemu_driver.c: Free cgroup ACLs

Commit 790f0b30 causes the contents of
the names array to be freed even on success, resulting in no listing of
defined but inactive Xen domains.

Spotted by Jim Fehlig

* src/qemu/qemu_conf.c: Fix default disk type to be 'FILE'
  again, after previous commit accidentally changed it

* src/qemu/qemu_driver.c: remove the port filter if the network device
  is detached via virDomainDetachDevice.

Introduce a new type="dir"  mode for <disks> that allows use of
QEMU's  virtual FAT block device driver. eg

    <disk type='dir' device='floppy'>
      <source dir='/tmp/test'/>
      <target dev='fda' bus='fdc'/>
      <readonly/>
    </disk>

gets turned into

  -drive file=fat:floppy:/tmp/test,if=floppy,index=0

Only read-only disks are supported with virtual FAT mode

* src/conf/domain_conf.c, src/conf/domain_conf.h: Add type="dir"
* docs/schemas/domain.rng: Document new disk type
* src/xen/xend_internal.c, src/xen/xm_internal.c: Raise error for
  unsupported disk types
* tests/qemuxml2argvdata/qemuxml2argv-disk-cdrom-empty.args: Fix
  empty disk file handling
* tests/qemuxml2argvdata/qemuxml2argv-disk-drive-fat.args,
  tests/qemuxml2argvdata/qemuxml2argv-disk-drive-fat.xml,
  tests/qemuxml2argvdata/qemuxml2argv-floppy-drive-fat.args,
  tests/qemuxml2argvdata/qemuxml2argv-floppy-drive-fat.xml
  tests/qemuxml2argvtest.c: Test QEMU vitual FAT driver
* src/qemu/qemu_conf.c: Support generating fat:/some/dir type
  disk args
* src/security/security_selinux.c: Temporarily skip labelling
  of directory based disks

The cpu_set_t type can only cope with NR_CPUS <= 1024, beyond this
it is neccessary to use alternate CPU_SET maps with a dynamically
allocated CPU map

* src/util/processinfo.c: Support new unlimited size CPU set type

* src/Makefile.am: Add processinfo.h/processinfo.c
* src/util/processinfo.c, src/util/processinfo.h: Module providing
  APIs for getting/setting process CPU affinity
* src/qemu/qemu_driver.c: Switch over to new APIs for schedular
  affinity
* src/libvirt_private.syms: Export virProcessInfoSetAffinity
  and virProcessInfoGetAffinity to internal drivers

* .x-sc_prohibit_strcmp_and_strncmp: Ignore docs/

0.7.3 was broken

* configure.in docs/news.html.in: release of 0.7.4
* configure.in libvirt.spec.in: require netcf >= 0.1.4
* src/Makefile.am: node_device/node_device_udev.h was missing from
  NODE_DEVICE_DRIVER_UDEV_SOURCES breaking compilation on platforms with
  udev

* configure.in docs/news.html.in libvirt.spec.in: describe new release
* po/*.po*: regenerate

HAL has been deprecated since F12 and RHEL-6, so if building on
these platforms, switch on the udev driver instead

* libvirt.spec.in: Activate udev on F12/RHEL6

* docs/formatdomain.html.in: document that vnet and vif are reserved
  names and will be ignored if manually specified.

* python/generator.py python/libvirt-override-api.xml
  python/libvirt-override.c: implement the bindings for
  virConnectListInterfaces() and virConnectListDefinedInterfaces()

* tools/virsh.pod: the man page was stating that most operations
  are asynchronous while in fact most of them are synchronous except
  domain shutdown, setvcpus and setmem.

* src/xen/xm_internal.c: the XM driver was not checking for previously
  defined UUID on new defines. Similar to virDomainObjIsDuplicate()
  behaviour.

For backward compatibility we used to add the tty path as
a tty attribute on console of type pty, duplicating the value
now found in source/@path, but the Relax-NG grammar wasn't
extended for this
    <console type='pty' tty='/dev/pts/8'>
      <source path='/dev/pts/8'/>
      <target port='0'/>
    </console>

* docs/schemas/domain.rng: allow an optional tty attribute
  containing a devicePath

Recent qemu releases require command option '-enable-qemu' in order
for the kvm functionality be activated. Libvirt needs to pass this flag
to qemu when starting a domain. Note that without the option,
even if both the kernel and qemu support KVM, KVM will not be activated
and VMs will be very slow.

* src/qemu/qemu_conf.h src/qemu/qemu_conf.c: parse the extra command
  line option from help and add it when running kvm
* tests/qemuhelptest.c: this modified the flags output for qemu-0.10.5
  and qemu-kvm-0.11.0-rc2 regression tests

* src/util/iptables.c: `--option !  this` is deprecated in favor of
  `! --option this` syntax, change the output command accordingly

Erroneously included the sysfs_path and parent_sysfs_path elements in
the node device xml, they were not supposed to show up there

* src/conf/node_device_conf.c: remove the output of the 2 fields

I realized that I inadvertently added a member to the def struct to
contain each device's sysfs path when there was an existing member in the
dev struct for "OS specific path to device metadat, eg sysfs"  Since the
udev backend needs to record the sysfs path while it's in the process of
creating the device, before the dev struct gets allocated, I chose to
remove the member from the dev struct.

* src/conf/node_device_conf.c src/conf/node_device_conf.h
  src/node_device/node_device_driver.c src/node_device/node_device_hal.c
  src/node_device/node_device_udev.c: remove devicePath from the
  structure and use def->sysfs_path instead

* src/node_device/node_device_driver.c: two places where not calling
  virReportOOMError after strdup failure

The qemudStartVMDaemon() and several functions it calls use
the QEMU monitor. The QEMU driver is locked while this function
is executing, so it is rquired to release the driver lock and
reacquire it either side of issuing a monitor command. It
failed todo so, leading to deadlock

* qemu/qemu_driver.c: Release driver when in qemudStartVMDaemon
  and things it calls

updated el.po es.po or.po pl.po ta.po te.po
ran make update-po

* configure.in: Fix typo in PCIACCESS_LIBS

Fixes http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=549949

VMware uses two MAC address prefixes: 00:0c:29 and 00:50:56. The 00:0c:29
prefix is used for ESX server generated addresses. The 00:50:56 prefix is
split into two parts. MAC addresses above 00:50:56:3f:ff:ff are generated
by a vCenter. The rest of the 00:50:56 prefix can be assigned manually.
Any MAC address within the 00:0c:29 and 00:50:56 prefix can be specified
in a domain XML config and the driver will handle the details internally.

* src/esx/esx_vmx.c: fix MAC address formatting
* tests/xml2vmxdata/*: update test files accordingly

In commit 3c80fac2 'vmxnet3' handling
was added to esxVMX_ParseEthernet(), but not to the inverse function
esxVMX_FormatEthernet().

* docs/drivers.html.in: list the ESX driver
* docs/drvesx.html.in: the new ESX driver documentation
* docs/hvsupport.html.in: add the ESX driver to the matrix
* docs/index.html.in, docs/sitemap.html.in: list the ESX driver
* src/esx/esx_driver.c: fix and cleanup some comments

Debian's /etc/xml/catalog doesn't contain system identifiers, so use
public identifiers instead.

* docs/Makefile.am: use public instead of system identifier
* docs/site.xsl: use matching public identifier