- 21 9月, 2017 11 次提交
-
-
由 Jiri Denemark 提交于
The only real usage of this flag was removed by "cpu_conf: Drop updateCPU from virCPUDefFormat". Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
-
由 Jiri Denemark 提交于
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
-
由 Jiri Denemark 提交于
In the past we updated host-model CPUs with host CPU data by adding a model and features, but keeping the host-model mode. And since the CPU model is not normally formatted for host-model CPU defs, we had to pass the updateCPU flag to the formatting code to be able to properly output updated host-model CPUs. Libvirt doesn't do this anymore, host-model CPUs are turned into custom mode CPUs once updated with host CPU data and thus there's no reason for keeping the hacks inside CPU XML formatters. Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
-
由 Jiri Denemark 提交于
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
-
由 Pino Toscano 提交于
They are simply not supported on that machine type. Partially-resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1487499Signed-off-by: NPino Toscano <ptoscano@redhat.com>
-
由 Pino Toscano 提交于
They are simply not supported on those architectures. Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1487499Signed-off-by: NPino Toscano <ptoscano@redhat.com>
-
由 Pino Toscano 提交于
This will be used to improve the validation for this type of devices. The former @def parameter is renamed to @dev, leaving @def for the virDomainDef (following the style used elsewhere). Signed-off-by: NPino Toscano <ptoscano@redhat.com>
-
由 Pino Toscano 提交于
If a test expects either a parse error or a failure but then there is neither a parse error nor a failure, then properly mark the test as failing, instead of failing later on (e.g. trying to open a non-existing .args file). Signed-off-by: NPino Toscano <ptoscano@redhat.com>
-
由 Pino Toscano 提交于
The guest of usb-bus-missing does not cause a parse error, but a validation issue -- hence, switch from DO_TEST_PARSE_ERROR to DO_TEST_FAILURE. Fixes commit b003b978. Signed-off-by: NPino Toscano <ptoscano@redhat.com>
-
由 Daniel P. Berrange 提交于
For win32 we need EXIT_AM_SKIP which is in testutils.h. We must define NO_LIBVIRT to prevent replacement of fprintf with virFilePrintf as we can't link to libvirt_util.la Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Daniel P. Berrange 提交于
The iohelper currently calls saferead() to get data from the underlying file. This has a problem with O_DIRECT when hitting end-of-file. saferead() is asked to read 1MB, but the first read() it does may return only a few KB, so it'll try another read() to fill the remaining buffer. Unfortunately the buffer pointer passed into this 2nd read() is likely not aligned to the extent that O_DIRECT requires, so rather than seeing '0' for end-of-file, we'll get -1 + EINVAL due to misaligned buffer. The way the iohelper is currently written, it already handles getting short reads, so there is actually no need to use saferead() at all. We can simply call read() directly. The benefit of this is that we can now write() the data immediately so when we go into the subsequent reads() we'll always have a correctly aligned buffer. Technically the file position ought to be aligned for O_DIRECT too, but this does not appear to matter when at end-of-file. Tested-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com> Reviewed-by: NEric Blake <eblake@redhat.com> Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
- 20 9月, 2017 12 次提交
-
-
由 Daniel P. Berrange 提交于
The commandhelper binary is a helper for commandtest that validates what file handles were inherited. For this to work reliably we must not have any libraries that leak file descriptors into commandhelper. Unfortunately some versions of gnutls will intentionally open file handles at library load time via a constructor function. We previously hacked around this in commit 4cbc15d0 Author: Martin Kletzander <mkletzan@redhat.com> Date: Fri May 2 09:55:52 2014 +0200 tests: don't fail with newer gnutls gnutls-3.3.0 and newer leaves 2 FDs open in order to be backwards compatible when it comes to chrooted binaries [1]. Linking commandhelper with gnutls then leaves these two FDs open and commandtest fails thanks to that. This patch does not link commandhelper with libvirt.la, but rather only the utilities making the test pass. Based on suggestion from Daniel [2]. [1] http://lists.gnutls.org/pipermail/gnutls-help/2014-April/003429.html [2] https://www.redhat.com/archives/libvir-list/2014-April/msg01119.html That fix relied on fact that while libvirt.so linked with gnutls, libvirt_util.la did not link to it. With the introduction of the util/vircrypto.c file that assumption is no longer valid. We must not link to libvirt_util.la at all - only gnulib and libc can (hopefully) be relied on not to open random file descriptors in constructors. Reviewed-by: NMartin Kletzander <mkletzan@redhat.com> Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 ZhiPeng Lu 提交于
For vhost-user ports, Open vSwitch acts as the server and QEMU the client. When OVS crashed or restart, QEMU shoule be reconnect to OVS. Signed-off-by: NZhiPeng Lu <lu.zhipeng@zte.com.cn> Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Julio Faracco 提交于
This commit adds new events for two methods and operations: *PoolBuild() and *PoolDelete(). Using the event-test and the commands set below we have the following outputs: $ sudo ./event-test Registering event callbacks myStoragePoolEventCallback EVENT: Storage pool test Defined 0 myStoragePoolEventCallback EVENT: Storage pool test Created 0 myStoragePoolEventCallback EVENT: Storage pool test Started 0 myStoragePoolEventCallback EVENT: Storage pool test Stopped 0 myStoragePoolEventCallback EVENT: Storage pool test Deleted 0 myStoragePoolEventCallback EVENT: Storage pool test Undefined 0 Another terminal: $ sudo virsh pool-define test.xml Pool test defined from test.xml $ sudo virsh pool-build test Pool test built $ sudo virsh pool-start test Pool test started $ sudo virsh pool-destroy test Pool test destroyed $ sudo virsh pool-delete test Pool test deleted $ sudo virsh pool-undefine test Pool test has been undefined This commits can be a solution for RHBZ #1475227. Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1475227Signed-off-by: NJulio Faracco <jcfaracco@gmail.com> Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 ZhiPeng Lu 提交于
The patch passes the reconnect timeout to QEMU by monitor on chardev hotplug. Signed-off-by: NZhiPeng Lu <lu.zhipeng@zte.com.cn> Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Daniel P. Berrange 提交于
The util/vircrypto.c file uses gnutls, so we must directly link libvirt_util.la with gnutls to avoid errors on OS which do not resolve symbols against indirectly linked libraries. This fixes a build failure on Ubuntu Trusty CCLD storagevolxml2argvtest /usr/bin/ld: ../src/.libs/libvirt_util.a(libvirt_util_la-vircrypto.o): undefined reference to symbol 'gnutls_strerror@@GNUTLS_1_4' //usr/lib/x86_64-linux-gnu/libgnutls.so.26: error adding symbols: DSO missing from command line Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Ashish Mittal 提交于
The VxHS block device will only use the newer formatting options and avoid the legacy URI syntax. An excerpt for a sample QEMU command line is: -drive file.driver=vxhs,file.vdisk-id=eb90327c-8302-4725-9e1b-4e85ed4dc251,\ file.server.type=tcp,file.server.host=192.168.0.1,\ file.server.port=9999,format=raw,if=none,id=drive-virtio-disk0,cache=none \ -device virtio-blk-pci,bus=pci.0,addr=0x4,drive=drive-virtio-disk0,\ id=virtio-disk0 Update qemuxml2argvtest with a simple test. Signed-off-by: NAshish Mittal <Ashish.Mittal@veritas.com> Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
-
由 Ashish Mittal 提交于
Extract out the "guts" of building a server entry into it's own separately callable/usable function in order to allow building a server entry for a consumer with src->nhosts == 1.
-
由 Ashish Mittal 提交于
Add the backing parse and a test case to verify parsing of VxHS backing storage. Signed-off-by: NAshish Mittal <Ashish.Mittal@veritas.com> Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
-
由 Ashish Mittal 提交于
Alter the schema to allow a VxHS block device. Sample XML is: <disk type='network' device='disk'> <driver name='qemu' type='raw' cache='none'/> <source protocol='vxhs' name='eb90327c-8302-4725-9e1b-4e85ed4dc251'> <host name='192.168.0.1' port='9999'/> </source> <target dev='vda' bus='virtio'/> <serial>eb90327c-8302-4725-9e1b-4e85ed4dc251</serial> <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/> </disk> Update the html docs to describe the capability for VxHS. Alter the qemuxml2xmltest to validate the formatting. Signed-off-by: NAshish Mittal <Ashish.Mittal@veritas.com> Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
-
由 Ashish Mittal 提交于
Add a new virStorageNetProtocol for Veritas HyperScale (VxHS) disks Signed-off-by: NAshish Mittal <Ashish.Mittal@veritas.com> Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
-
由 John Ferlan 提交于
Using the query-qmp-schema introspection - look for the 'vxhs' blockdevOptions type. NB: This is a "best effort" type situation as there is not a mechanism to determine whether the running QEMU has been built with '--enable-vxhs'. All we can do is check if the option to use vxhs for a blockdev-add exists in the command infrastructure which does not take that into account when building its table of commands and options. Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
-
由 Laine Stump 提交于
The mlx4 (Mellanox) netdev driver implements the sysfs phys_port_id file for both VFs and PFs, so you can find the VF netdev plugged into the same physical port as any given PF netdev by comparing the contents of phys_port_id of the respective netdevs. That's what libvirt does when attempting to find the PF netdev for a given VF netdev (or vice versa). Most other netdev's drivers don't implement phys_port_id, so the file is visible in sysfs directory listing, but attempts to read it result in ENOTSUPP. In these cases, libvirt is unable to read phys_port_id of either the PF or the VF, so it just returns the first entry in the PF/VF's list of netdevs. But we've found that the i40e driver is in between those two situations - it implements phys_port_id for PF netdevs, but doesn't implement it for VF netdevs. So libvirt would successfully read the phys_port_id of the PF netdev, then try to find a VF netdev with matching phys_port_id, but would fail because phys_port_id is NULL for all VFs. This would result in a message like the following: Could not find network device with phys_port_id '3cfdfe9edc39' under PCI device at /sys/class/net/ens4f1/device/virtfn0 To solve this problem in a way that won't break functionality for anyone else, this patch saves the first netdev name we find for the device, and returns that if we fail to find a netdev with the desired phys_port_id.
-
- 19 9月, 2017 17 次提交
-
-
由 Peter Krempa 提交于
Documentation states: "'offset' and 'size' represent an area which must lie entirely within the device or file." Enforce the that the buffer lies within fully.
-
由 Peter Krempa 提交于
Commit 3956af49 broke the blockPeek API since virStorageFileRead allocates a return buffer and fills it with the data, while the API fills a user-provided buffer. This did not get caught by the compiler since the API prototype uses a 'void *'. Fix it by transferring the data from the allocated buffer to the user provided buffer. Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1491217
-
由 Andrea Bolognani 提交于
Turns out a build job can be stuck waiting for a macOS worker to become available for a pretty long time: if more than 5 commits have been pushed in the meantime, the clone will be too shallow for the worker to find the commit it's supposed to verify, and the build job will fail. See https://travis-ci.org/libvirt/libvirt/jobs/277244110 for an example of the failure described. This reverts commit 2e975abd. Signed-off-by: NAndrea Bolognani <abologna@redhat.com> Reviewed-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Andrea Bolognani 提交于
This is particularly useful on operating systems that don't ship Python as part of the base system (eg. FreeBSD) while still working just as well as it did before on Linux. While at it, make it explicit that our scripts are only going to work with Python 2, and remove the usage of unbuffered I/O, which as far as I can tell has no effect on the output files. Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
-
由 Andrea Bolognani 提交于
This is particularly useful on operating systems that don't ship Perl as part of the base system (eg. FreeBSD) while still working just as well as it did before on Linux. In one case (src/rpc/genprotocol.pl) the interpreter path was missing altogether. Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
-
由 Michal Privoznik 提交于
I don't want to mask the real problem, but one can advocate that we should be marking graphics ports as already in use on qemuProcessReconnect anyway, because we already know that they are taken. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Ján Tomko 提交于
Instead of checking for all possible constants that every kernel header with devlink support should have (and defining HAVE_DECL_DEVLINK as 1 if any of them is present due to the way AC_CHECK_DECLS works), only check for DEVLINK_CMD_ESWITCH_GET. This is the name of the constant since kernel 4.11. Between 4.8 and 4.11, the now deprecated spelling DEVLINK_CMD_ESWITCH_MODE_GET was used. Assume DEVLINK_ESWITCH_MODE_SWITCHDEV is available, since it was introduced along with the deprecated spelling.
-
由 John Ferlan 提交于
Use the new accessor API for storage_driver.
-
由 John Ferlan 提交于
Use the new accessor APIs for storage_driver.
-
由 John Ferlan 提交于
Since it's been used that way anyway, let's just convert it to a bool and only make the external representation be an int.
-
由 John Ferlan 提交于
Use the new accessor APIs for storage_driver and test_driver.
-
由 John Ferlan 提交于
Use the new accessor APIs for storage_driver, test_driver, and gluster backend.
-
由 John Ferlan 提交于
Use the new accessor API for storage_driver.
-
由 John Ferlan 提交于
Use the new accessor APIs for storage_driver and test_driver.
-
由 John Ferlan 提交于
Introduce virStoragePoolObjForEachVolume to scan each volume calling the passed callback function until all volumes have been processed in the storage pool volume list, unless the callback function returns an error. Introduce virStoragePoolObjSearchVolume to search each volume calling the passed callback function until it returns true indicating that the desired volume was found. Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
-
由 John Ferlan 提交于
Create/use virStoragePoolObjAddVol in order to add volumes onto list. Create/use virStoragePoolObjRemoveVol in order to remove volumes from list. Create/use virStoragePoolObjGetVolumesCount to get count of volumes on list. For the storage driver, the logic alters when the volumes.obj list grows to after we've fetched the volobj. This is an optimization of sorts, but also doesn't "needlessly" grow the volumes.objs list and then just decr the count if the virGetStorageVol fails. Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
-
由 John Ferlan 提交于
It's a bool not an int, so use true/false and not 1/0
-