In preparation for code re-organization, rename the Macvtap
management APIs to have the following patterns

  virNetDevMacVLanXXXXX     - macvlan/macvtap interface management
  virNetDevVPortProfileXXXX - virtual port profile management

* src/util/macvtap.c, src/util/macvtap.h: Rename APIs
* src/conf/domain_conf.c, src/network/bridge_driver.c,
  src/qemu/qemu_command.c, src/qemu/qemu_command.h,
  src/qemu/qemu_driver.c, src/qemu/qemu_hotplug.c,
  src/qemu/qemu_migration.c, src/qemu/qemu_process.c,
  src/qemu/qemu_process.h: Update for renamed APIs

Qemu will be the first driver to make use of a typed string in the
next round of additions.  Separate out the trivial addition.

* src/qemu/qemu_driver.c (qemudSupportsFeature): Advertise feature.
(qemuDomainGetBlkioParameters, qemuDomainGetMemoryParameters)
(qemuGetSchedulerParametersFlags, qemudDomainBlockStatsFlags):
Allow typed strings flag where trivially supported.

The bridge management APIs in src/util/bridge.c require a brControl
object to be passed around. This holds the file descriptor for the
control socket. This extra object complicates use of the API for
only a minor efficiency gain, which is in turn entirely offset by
the need to fork/exec the brctl command for STP configuration.

This patch removes the 'brControl' object entirely, instead opening
the control socket & closing it again within the scope of each method.

The parameter names for the APIs are also made to consistently use
'brname' for bridge device name, and 'ifname' for an interface
device name. Finally annotations are added for non-NULL parameters
and return check validation

* src/util/bridge.c, src/util/bridge.h: Remove brControl object
  and update API parameter names & annotations.
* src/lxc/lxc_driver.c, src/network/bridge_driver.c,
  src/uml/uml_conf.h, src/uml/uml_conf.c, src/uml/uml_driver.c,
  src/qemu/qemu_command.c, src/qemu/qemu_conf.h,
  src/qemu/qemu_driver.c: Remove reference to 'brControl' object

s/virDomainDeviceTypeToString/virDomainDiskDeviceTypeToString/

Report by Xu He Jie <xuhj@linux.vnet.ibm.

While Xen only has a single paravirt console, UML, and
QEMU both support multiple paravirt consoles. The LXC
driver can also be trivially made to support multiple
consoles. This patch extends the XML to allow multiple
<console> elements in the XML. It also makes the UML
and QEMU drivers support this config.

* src/conf/domain_conf.c, src/conf/domain_conf.h: Allow
  multiple <console> devices
* src/lxc/lxc_driver.c, src/xen/xen_driver.c,
  src/xenxs/xen_sxpr.c, src/xenxs/xen_xm.c: Update for
  internal API changes
* src/security/security_selinux.c, src/security/virt-aa-helper.c:
  Only label consoles that aren't a copy of the serial device
* src/qemu/qemu_command.c, src/qemu/qemu_driver.c,
  src/qemu/qemu_process.c, src/uml/uml_conf.c,
  src/uml/uml_driver.c: Support multiple console devices
* tests/qemuxml2xmltest.c, tests/qemuxml2argvtest.c: Extra
  tests for multiple virtio consoles. Set QEMU_CAPS_CHARDEV
  for all console /channel tests
* tests/qemuxml2argvdata/qemuxml2argv-channel-virtio-auto.args,
  tests/qemuxml2argvdata/qemuxml2argv-channel-virtio.args
  tests/qemuxml2argvdata/qemuxml2argv-console-virtio.args: Update
  for correct chardev syntax
* tests/qemuxml2argvdata/qemuxml2argv-console-virtio-many.args,
  tests/qemuxml2argvdata/qemuxml2argv-console-virtio-many.xml: New
  test file

Document the parameter names that will be used by
virDomain{Get,Set}SchedulerParameters{,Flags}, rather than
hard-coding those names in each driver, to match what is
done with memory, blkio, and blockstats parameters.

* include/libvirt/libvirt.h.in (VIR_DOMAIN_SCHEDULER_CPU_SHARES)
(VIR_DOMAIN_SCHEDULER_VCPU_PERIOD)
(VIR_DOMAIN_SCHEDULER_VCPU_QUOTA, VIR_DOMAIN_SCHEDULER_WEIGHT)
(VIR_DOMAIN_SCHEDULER_CAP, VIR_DOMAIN_SCHEDULER_RESERVATION)
(VIR_DOMAIN_SCHEDULER_LIMIT, VIR_DOMAIN_SCHEDULER_SHARES): New
field name macros.
* src/qemu/qemu_driver.c (qemuSetSchedulerParametersFlags)
(qemuGetSchedulerParametersFlags): Use new defines.
* src/test/test_driver.c (testDomainGetSchedulerParamsFlags)
(testDomainSetSchedulerParamsFlags): Likewise.
* src/xen/xen_hypervisor.c (xenHypervisorGetSchedulerParameters)
(xenHypervisorSetSchedulerParameters): Likewise.
* src/xen/xend_internal.c (xenDaemonGetSchedulerParameters)
(xenDaemonSetSchedulerParameters): Likewise.
* src/lxc/lxc_driver.c (lxcSetSchedulerParametersFlags)
(lxcGetSchedulerParametersFlags): Likewise.
* src/esx/esx_driver.c (esxDomainGetSchedulerParametersFlags)
(esxDomainSetSchedulerParametersFlags): Likewise.
* src/libxl/libxl_driver.c (libxlDomainGetSchedulerParametersFlags)
(libxlDomainSetSchedulerParametersFlags): Likewise.

* src/qemu/qemu_driver.c: Fix use of uninitialized 'params'

Since all virTypedParameter APIs allow us to return the number
of slots we actually populated, we should allow the user to
call with nparams too small (without overrunning their array)
or too large (ignoring the tail of the array that we can't fill),
rather than requiring that they get things exactly right.

Making this change will make it easier for a future patch to
introduce VIR_TYPED_PARAM_STRING, with filtering in libvirt.c
rather than in every single driver, since users already have
to be prepared for *nparams to be smaller on exit than on entry.

* src/qemu/qemu_driver.c (qemuDomainGetBlkioParameters)
(qemuDomainGetMemoryParameters): Allow variable nparams on entry.
(qemuGetSchedulerParametersFlags): Drop redundant check.
(qemudDomainBlockStats, qemudDomainBlockStatsFlags): Rename...
(qemuDomainBlockStats, qemuDomainBlockStatsFlags): ...to this.
Don't return unavailable stats.

The qemu RBD driver needs access to the conn in order to get the secret
needed for connecting to the ceph cluster.
Signed-off-by: NSage Weil <sage@newdream.net>

The QEMU monitor command 'add_client' can be used to connect to
a VNC or SPICE graphics display. This allows for implementation
of the virDomainOpenGraphics API

* src/qemu/qemu_driver.c: Implement virDomainOpenGraphics
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
  src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h,
  src/qemu/qemu_monitor_text.c, src/qemu/qemu_monitor_text.h:
  Add binding for 'add_client' command

Rather than making all clients of monitor commands that are JSON-only
check whether yajl support was compiled in, it is simpler to just
avoid setting the capability bit up front if we can't use the capability.

* src/qemu/qemu_capabilities.c (qemuCapsComputeCmdFlags): Only set
capability bit if we also have yajl library to use it.
* src/qemu/qemu_driver.c (qemuDomainReboot): Drop #ifdefs.
* src/qemu/qemu_process.c (qemuProcessStart): Likewise.
* tests/qemuhelptest.c (testHelpStrParsing): Pass test even
without yajl.
* tests/qemuxml2argvtest.c (mymain): Simplify use of json flag.
* tests/qemuxml2argvdata/qemuxml2argv-disk-drive-error-*.args:
Update expected results to match.

This patch is rather cosmetic as it only moves device alias
assignation from command line construction just before that.
However, it is needed in connotation of previous and next patch.

The improvements to virBuffer, along with a paradigm shift to pass
the original buffer through rather than creating a second buffer,
allow us to shave off quite a few lines of code.

* src/util/sysinfo.h (virSysinfoFormat): Alter signature.
* src/util/sysinfo.c (virSysinfoFormat, virSysinfoBIOSFormat)
(virSysinfoSystemFormat, virSysinfoProcessorFormat)
(virSysinfoMemoryFormat): Change indentation parameter.
* src/conf/domain_conf.c (virDomainSysinfoDefFormat): Adjust
caller.
* src/qemu/qemu_driver.c (qemuGetSysinfo): Likewise.

There is a little difference between the output of domxml-to-native and the actual commandline.
No matter qemu is in control or readline mode, domxml-to-native always converts it to readline mode.

That is because the parameter "monitor_json" for qemuBuildCommandLine() is always set to false
in qemuDomainXMLToNative().
Signed-off-by: Ntangchen <tangchen@cn.fujitsu.com>

Noticed when testing new libvirt against old qemu that lacked the
snapshot_blkdev HMP command.  Libvirt was mistakenly treating the
command as successful, and re-writing the domain XML to use the
just-created 0-byte file, rendering the domain broken on restart.

* src/qemu/qemu_monitor_text.c (qemuMonitorTextDiskSnapshot):
Notice another possible error message.
* src/qemu/qemu_driver.c
(qemuDomainSnapshotCreateSingleDiskActive): Don't keep 0-byte file
on failure.

Explicitly disallow conflicts between domain name from dxml and dname.

Otherwise we can end up with a dangling job that can only be cleared by
restarting libvirtd.

As this is needed. Although some functions check for domain
being active before obtaining job, we need to check it after,
because obtaining job unlocks domain object, during which
a state of domain can be changed.

This patch extends qemudDomainCoreDump so it supports new VIR_DUMP_RESET
flag. If this flag is set, domain is reset on successful dump. However,
this is needed to be done after we start CPUs.

With the recent refactoring of qemu snapshot relationships, it
is now trivial to filter on leaves.

* src/conf/domain_conf.c (virDomainSnapshotObjListCount)
(virDomainSnapshotObjListCopyNames): Handle new flag.
* src/qemu/qemu_driver.c (qemuDomainSnapshotListNames)
(qemuDomainSnapshotNum, qemuDomainSnapshotListChildrenNames)
(qemuDomainSnapshotNumChildren): Pass new flag through.

The previous optimizations lead to some follow-on cleanups.

* src/conf/domain_conf.c (virDomainSnapshotForEachChild)
(virDomainSnapshotForEachDescendant): Drop dead parameter.
(virDomainSnapshotActOnDescendant)
(virDomainSnapshotObjListNumFrom)
(virDomainSnapshotObjListGetNamesFrom): Update callers.
* src/qemu/qemu_driver.c (qemuDomainSnapshotNumChildren)
(qemuDomainSnapshotListChildrenNames, qemuDomainSnapshotDelete):
Likewise.
* src/conf/domain_conf.h: Update prototypes.

Maintain the parent/child relationships of all qemu snapshots.

* src/qemu/qemu_driver.c (qemuDomainSnapshotLoad): Populate
relationships after loading.
(qemuDomainSnapshotCreateXML): Set relations on creation; tweak
redefinition to reuse existing object.
(qemuDomainSnapshotReparentChildren, qemuDomainSnapshotDelete):
Clear relations on delete.

Not too hard to wire up.  The trickiest part is realizing that
listing children of a snapshot cannot use SNAPSHOT_LIST_ROOTS,
and that we overloaded that bit to also mean SNAPSHOT_LIST_DESCENDANTS;
we use that bit to decide which iteration to use, but don't want
the existing counting/listing functions to see that bit.

* src/conf/domain_conf.h (virDomainSnapshotObjListNumFrom)
(virDomainSnapshotObjListGetNamesFrom): New prototypes.
* src/conf/domain_conf.c (virDomainSnapshotObjListNumFrom)
(virDomainSnapshotObjListGetNamesFrom): New functions.
* src/libvirt_private.syms (domain_conf.h): Export them.
* src/qemu/qemu_driver.c (qemuDomainSnapshotNumChildren)
(qemuDomainSnapshotListChildrenNames): New functions.

If parsing qemu command line fails (e.g. because of non-existing
process number supplied), we jump to cleanup label where we free
pidfile. Therefore it needs to be initialized. Otherwise we free
random pointer.

Implements the documentation for snapshot revert vs. force.

Part of the patch tightens existing behavior (previously, reverting
to an old snapshot without <domain> was blindly attempted, now it
requires force), while part of it relaxes behavior (previously, it
was not possible to revert an active domain to an ABI-incompatible
active snapshot, now force allows this transition).

* src/qemu/qemu_driver.c (qemuDomainRevertToSnapshot): Check for
risky situations, and allow force to get past them.

Qemu driver tries to update balloon data in virDomainGetInfo and if it
can't do so because there is another monitor job running, it just
reports what's known in domain def. However, if there was no job running
but getting the data from qemu fails, we would fail the whole API. This
doesn't make sense. Let's make the failure nonfatal.

Currently, qemuDomainGetXMLDesc and qemudDomainGetInfo check for
outstanding synchronous job before (eventual) monitor entering.
However, there can be already async job set, e.g. migration.

Signed-off-by: NXu He Jie <xuhj@linux.vnet.ibm.com>

If the daemon is restarted so we reconnect to monitor, cdrom media
can be ejected. In that case we don't want to show it in domain xml,
or require it on migration destination.

To check for disk status use 'info block' monitor command.

First hypervisor implementation of the new API.
Allows 'virsh snapshot-list --tree' to be more efficient.

* src/qemu/qemu_driver.c (qemuDomainSnapshotGetParent): New
function.

Thus, when libvirtd is restarted, it will know if a domain is supposed
to be killed or reset when it shuts down.

Commit 282fe1f0 documented that transient domains will auto-delete
any snapshot metadata when the last reference to the domain is
removed, and that management apps are in charge of grabbing any
snapshot metadata prior to that point.  However, this was not
actually implemented for qemu until now.

* src/qemu/qemu_driver.c (qemudDomainCreate)
(qemuDomainDestroyFlags, qemuDomainSaveInternal)
(qemudDomainCoreDump, qemuDomainRestoreFlags, qemudDomainDefine)
(qemuDomainUndefineFlags, qemuDomainMigrateConfirm3)
(qemuDomainRevertToSnapshot): Clean up snapshot metadata.
* src/qemu/qemu_migration.c (qemuMigrationPrepareAny)
(qemuMigrationPerformJob, qemuMigrationPerformPhase)
(qemuMigrationFinish): Likewise.
* src/qemu/qemu_process.c (qemuProcessHandleMonitorEOF)
(qemuProcessReconnect, qemuProcessReconnectHelper)
(qemuProcessAutoDestroyDom): Likewise.

This patch is mostly code motion - moving some functions out
of qemu_driver and into qemu_domain so they can be reused by
multiple qemu_* files (since qemu_driver.h must not grow).
It also adds a new helper function, qemuDomainRemoveInactive,
which will be used in the next patch.

* src/qemu/qemu_domain.h (qemuFindQemuImgBinary)
(qemuDomainSnapshotWriteMetadata, qemuDomainSnapshotForEachQcow2)
(qemuDomainSnapshotDiscard, qemuDomainSnapshotDiscardAll)
(qemuDomainRemoveInactive): New prototypes.
(struct qemu_snap_remove): New struct.
* src/qemu/qemu_domain.c (qemuDomainRemoveInactive)
(qemuDomainSnapshotDiscardAllMetadata): New functions.
(qemuFindQemuImgBinary, qemuDomainSnapshotWriteMetadata)
(qemuDomainSnapshotForEachQcow2, qemuDomainSnapshotDiscard)
(qemuDomainSnapshotDiscardAll): Move here...
* src/qemu/qemu_driver.c (qemuFindQemuImgBinary)
(qemuDomainSnapshotWriteMetadata, qemuDomainSnapshotForEachQcow2)
(qemuDomainSnapshotDiscard, qemuDomainSnapshotDiscardAll): ...from
here.
(qemuDomainUndefineFlags): Update caller.
* src/conf/domain_conf.c (virDomainRemoveInactive): Doc fixes.

Commit 19f8c980 introduced VIR_DOMAIN_UNDEFINE_SNAPSHOTS_METADATA,
with the intent that omitting the flag makes undefine fail, and
including the flag deletes metadata.  But it used the wrong logic.
Also, hoist the transient domain sooner, so that we don't
accidentally remove metadata of a transient domain.

* src/qemu/qemu_driver.c (qemuDomainUndefineFlags): Check correct
flag value.

The commit that prevents disk corruption on domain shutdown
(96fc4784) causes regression with QEMU
0.14.* and 0.15.* because of a regression bug in QEMU that was fixed
only recently in QEMU git. The affected versions of QEMU do not quit on
SIGTERM if started with -no-shutdown, which we use to implement fake
reboot. Since -no-shutdown tells QEMU not to quit automatically on guest
shutdown, domains started using the affected QEMU cannot be shutdown
properly and stay in a paused state.

This patch disables fake reboot feature on such QEMU by not using
-no-shutdown, which makes shutdown work as expected. However,
virDomainReboot will not work in this case and it will report "Requested
operation is not valid: Reboot is not supported with this QEMU binary".

Virsh man page lists driver types to be used with attach-device
command, but does not specify that those are usable only with the XEN
Hypervisor.

This patch adds statement, that those options specified are applicable
only on the Xen hypervisor and adds option usable with qemu emulator.

This patch also changes type of error returned by QEMU driver if the
user specifies incompatible driver type from VIR_ERR_INTERNAL_ERROR to
VIR_ERR_CONFIG_UNSUPPORTED.

For all types of disks other than qcow2, we were requesting that
SELinux labeling visit the new file as if it were qcow2, which
means labeling would try to find the backing files of an empty file.
And for a pre-existing qcow2 disk, we were passing NULL, which meant
that labelling tried to probe the file type (and if probing is
disabled, per the default qemu.conf, this made snapshots fail).
What we really want is to make SELinux labeling visit the new
file as raw; it will later be converted to qcow2 if qemu successfully
made the snapshot.

* src/qemu/qemu_driver.c
(qemuDomainSnapshotCreateSingleDiskActive): Force SELinux labeling
to avoid probe of new file.

For external snapshots to be useful on persistent domains, we must
alter the persistent definition alongside the running definition.
Thanks to the possibility of disk hotplug as well as of edits that
only affect the persistent xml, we can't assume that vm->def and
vm->newDef have the same disk at the same index, so we can only
update the persistent copy if the device destination matches up.

* src/qemu/qemu_driver.c (qemuDomainSnapshotCreateDiskActive)
(qemuDomainSnapshotCreateSingleDiskActive): Also affect newDef, if
present.

Ever since we introduced fake reboot, we call qemuProcessKill as a
reaction to SHUTDOWN event. Unfortunately, qemu doesn't guarantee it
flushed all internal buffers before sending SHUTDOWN, in which case
killing the process forcibly may result in (virtual) disk corruption.

By sending just SIGTERM without SIGKILL we give qemu time to to flush
all buffers and exit. Once qemu exits, we will see an EOF on monitor
connection and tear down the domain. In case qemu ignores SIGTERM or
just hangs there, the process stays running but that's not any different
from a possible hang anytime during the shutdown process so I think it's
just fine.

Also qemu (since 0.14 until it's fixed) has a bug in SIGTERM processing
which causes it not to exit but instead send new SHUTDOWN event and keep
waiting. I think the best we can do is to ignore duplicate SHUTDOWN
events to avoid a SHUTDOWN-SIGTERM loop and leave the domain in paused
state.

/usr/lib/stdlib.h in Mac OS X and probably also in BSD's
exports this symbol :(