This adds two util functions (virIsCapableFCHost and virIsCapableVport),
and rename helper check_fc_host_linux as detect_scsi_host_caps,
check_capable_vport_linux is removed, as it's abstracted to the util
function virIsCapableVport. detect_scsi_host_caps nows detect both
the fc_host and vport_ops capabilities. "stat(2)" is replaced with
"access(2)" for saving.

* src/util/virutil.h:
  - Declare virIsCapableFCHost and virIsCapableVport
* src/util/virutil.c:
  - Implement virIsCapableFCHost and virIsCapableVport
* src/node_device/node_device_linux_sysfs.c:
  - Remove check_capable_vport_linux
  - Rename check_fc_host_linux as detect_scsi_host_caps, and refactor
    it a bit to detect both fc_host and vport_os capabilities
* src/node_device/node_device_driver.h:
  - Change/remove the related declarations
* src/node_device/node_device_udev.c: (Use detect_scsi_host_caps)
* src/node_device/node_device_hal.c: (Likewise)
* src/node_device/node_device_driver.c (Likewise)

The use of 'stat' in nodeDeviceVportCreateDelete is only to check
if the file exists or not, it's a bit overkill, and safe to replace
with the wrapper of access(2) (virFileExists).

"open_wwn_file" in node_device_linux_sysfs.c is redundant, on one
hand it duplicates work of virFileReadAll, on the other hand, it's
waste to use a function for it, as there is no other users of it.
So I don't see why the file opening work cannot be done in
"read_wwn_linux".

"read_wwn_linux" can be abstracted as an util function. As what all
it does is to read the sysfs entry.

So this patch removes "open_wwn_file", and abstract "read_wwn_linux"
as an util function "virReadFCHost" (a more general name, because
after changes, it can read each of the fc_host entry now).

* src/util/virutil.h: (Declare virReadFCHost)
* src/util/virutil.c: (Implement virReadFCHost)
* src/node_device/node_device_linux_sysfs.c: (Remove open_wwn_file,
  and read_wwn_linux)
src/node_device/node_device_driver.h: (Remove the declaration of
  read_wwn_linux, and the related macros)
src/libvirt_private.syms: (Export virReadFCHost)

VIR_CONNECT_LIST_NODE_DEVICES_CAP_FC_HOST to filter the FC HBA,
and VIR_CONNECT_LIST_NODE_DEVICES_CAP_VPORTS to filter the FC HBA
which supports vport.

Guess it was created for the fc_host and vports_ops capabilities
purpose, but there is enum virNodeDevScsiHostCapFlags for them,
and enum virNodeDevHBACapType is unused, and actually both
VIR_ENUM_DECL and VIR_ENUM_IMPL use the wrong enum name
"virNodeDevHBACap".

When the container has the same '/dev' mount as host (no chroot),
calling domainShutdown(WithFlags) shouldn't shutdown the host it is
running on.

For a root filesystem with type=file or type=block, the LXC
container was forgetting to actually mount it, before doing
the pivot root step.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Currently the lxc controller sets up the devpts instance on
$rootfsdef->src, but this only works if $rootfsdef is using
type=mount. To support type=block or type=file for the root
filesystem, we must use /var/lib/libvirt/lxc/$NAME.devpts
for the temporary devpts mount in the controller

Instead of using /var/lib/libvirt/lxc/$NAME for the FUSE
filesystem, use /var/lib/libvirt/lxc/$NAME.fuse. This allows
room for other temporary mounts in the same directory

Some of the LXC callbacks did not lock the virDomainObjPtr
instance. This caused transient errors like

error: Failed to start domain busy-mount
error: cannot rename file '/var/run/libvirt/lxc/busy-mount.xml.new' as '/var/run/libvirt/lxc/busy-mount.xml': No such file or directory

as 2 threads tried to update the status file concurrently
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The virDomainGetRootFilesystem was only returning filesystems
with type=mount. This is bogus - any type of filesystem is
valid as the root, if dst=/.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Noticed that parsing bond interface XML containing the miimon element
fails

  <interface type="bond" name="bond0">
    ...
    <bond mode="active-backup">
      <miimon freq="100" carrier="netif"/>
      ...
    </bond>
  </interface>

This configuration does not contain the optional updelay and downdelay
attributes, but parsing will fail due to returning the result of
virXPathULong (a -1 when the attribute doesn't exist) from
virInterfaceDefParseBond after examining the updelay attribute.

While fixing this bug, cleanup the function to use virXPathInt instead
of virXPathULong, and store the result directly instead of using a tmp
variable.  Using virXPathInt actually fixes a potential silent
truncation bug noted by Eric Blake.

Also, there is no cleanup in the error label.  Remove the label,
returning failure where failure occurs and success if the end of the
function is reached.

If users build with --enable-test-oom configure option,
they get this error saying, virAllocTest* functions are
not defined within tests/testutils.c.

The 'nodeset' variable was never initialized, causing a later
VIR_FREE(nodeset) to free uninitialized memory.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

This does nothing more than adding the new device and capability.
The device is present since QEMU 1.2.0.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

A better way to do this would be to use a configuration file like

   [iscsi "target-name"]
   user = name
   password = pwd

and pass it via -readconfig.  This would remove the username and password
from the "ps" output.  For now, however, keep this solution.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Only sheepdog actually required it in the code, and we can use 7000 as the
default---the same value that QEMU uses for the simple "sheepdog:VOLUME"
syntax.  With this change, the schema can be fixed to allow no port.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This enables usage of commands like persistent reservations.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

libiscsi provides a userspace iSCSI initiator.

The main advantage over the kernel initiator is that it is very
easy to provide different initiator names for VMs on the same host.
Thus libiscsi supports usage of persistent reservations in the VM,
which otherwise would only be possible with NPIV.

libiscsi uses "iscsi" as the scheme, not "iscsi+tcp".  We can change
this in the tests (while remaining backwards-compatible manner, because
QEMU uses TCP as the default transport for both Gluster and NBD).
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

When the blockjob fails for some reason an event is emitted but the disk
wasn't unmarked as being part of a active block copy operation.

Some code mistakenly called virIdentityOnceInit directly
instead of virIdentityInitialize(). This meant that one-time
initializer was run many times with predictably bad results.

The VIR_ERR_NO_SUPPORT error code is reserved for cases where an
API is not implemented in a driver. It definitely should not be
used when an API execution fails due to unsupported operation.

The recent commit moved some of the use of libnuma out of the
driver code, and into src/util/. It did not, however, update
libvirt_util.la to link against libnuma. This caused linkage
failure with virt-aa-helper, since nothing else caused libnuma
to be pulled onto the linker command line.

The fix removes all reference to NUMACTL_LIBS/CFLAGS from the
various modules in src/Makefile.am and just adds them to the
libvirt_util.la module, which everything else depends on.

Technically a build-breaker fix, but wanted to wait for feedback
on this
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

We should record the new disk src in the shared disk table for
updating disk (CD-ROM or Floppy) API. Fortunately, we only allow
to update the disk source now, otherwise we might also want to
set the unpriv_sgio setting.

This plumbs in the XML description of iSCSI shares.  The next patches
will add support for the libiscsi userspace initiator.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Now that VCPU number are removed from qemu_monitor_text.c
(commit cc78d7ba), VCPU string checking also should be removed.
Report-by: NJohn Ferlan <jferlan@redhat.com>
Signed-off-by: NLi Zhang <zhlcindy@linux.vnet.ibm.com>

We will use virCgroupRemoveRecursively to remove cgroup
directories in the coming patch.
Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com>

but libvirt is built with --with-selinux. In this case getpeercon
returns ENOPROTOOPT so don't return an error in that case but simply
don't set seccon.

The virNetSocket & virIdentity classes accidentally got some
conditionals using HAVE_SELINUX instead of WITH_SELINUX.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

This patch adds cpuset cgroup support for LXC.
Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com>

Intend to reduce the redundant code,use virNumaSetupMemoryPolicy
to replace virLXCControllerSetupNUMAPolicy and
qemuProcessInitNumaMemoryPolicy.

This patch also moves the numa related codes to the
file virnuma.c and virnuma.h
Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com>

Compilation error when WITH_GNUTLS is 0, introduced in commit d5e83ad9.

Allow lxc using the advisory nodeset from querying numad,
this means if user doesn't specify the numa nodes that
the lxc domain should assign to, libvirt will automatically
bind the lxc domain to the advisory nodeset which queried from
numad.
Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com>

qemuGetNumadAdvice will be used by LXC driver, rename
it to virNumaGetAutoPlacementAdvice and move it to virnuma.c
Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com>

The "dtb" option sets the filename for the device tree.
If without this option support, "-dtb file" will be converted into
<qemu:commandline> in domain XML file.
For example, '-dtb /media/ram/test.dtb' will be converted into
  <qemu:commandline>
    <qemu:arg value='-dtb'/>
    <qemu:arg value='/media/ram/test.dtb'/>
  </qemu:commandline>

This is not very friendly.
This patchset add special <dtb> tag like <kernel> and <initrd>
which is easier for user to write domain XML file.
  <os>
    <type arch='ppc' machine='ppce500v2'>hvm</type>
    <kernel>/media/ram/uImage</kernel>
    <initrd>/media/ram/ramdisk</initrd>
    <dtb>/media/ram/test.dtb</dtb>
    <cmdline>root=/dev/ram rw console=ttyS0,115200</cmdline>
  </os>
Signed-off-by: NEric Blake <eblake@redhat.com>