Initially, update the UUID field to have the proper format, but
then also changed the type, id, and name fields.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

When virDomainObjParseFile runs, it returns a locked @obj with
one reference. Rather than just use virObjectUnref to clean that
up, use virObjectEndAPI.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Create a common helper to add an object to the locked domain
objlist hash tables and use it.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

If the virHashAddEntry fails, then we need to "careful" about
how we free the @obj. When virDomainObjParseFile returns there
is one reference and the object is locked, so use virDomainObjEndAPI
when done.

Add a virObjectRef in the error path for the second virHashAddEntry
call since it doesn't call virObjectRef, but virHashRemoveEntry
will call virObjectUnref because virObjectFreeHashData is called
when the element is removed from the hash table as set up in
virDomainObjListNew.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

If the virHashAddEntry fails, then we need to "careful" about
how we free the @vm. When virDomainObjNew returns there is one
reference and the object is locked, so use virDomainObjEndAPI
when done.

Add a virObjectRef in the error path for the second virHashAddEntry
call since it doesn't call virObjectRef, but virHashRemoveEntry
will call virObjectUnref because virObjectFreeHashData is called
when the element is removed from the hash table as set up in
virDomainObjListNew.

Eventually these paths should goto error and error should be changed
to use EndAPI as well, but that requires more adjustments to other
paths in the code to have a locked and ref counted @vm.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

This variable is not actually used in the function. Especially
after 31869efe.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Since its introduction in 5d5c732d it has been never used.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Now that support for the pcie-to-pci-bridge controller has
been implemented, adding the QEMU_CAPS_DEVICE_PCIE_PCI_BRIDGE
capability to the existing test is enough to cause the guest
to use pcie-to-pci-bridge instead of dmi-to-pci-bridge.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Both pcie-to-pci-bridge and dmi-to-pci-bridge can be used to
create a traditional PCI topology in a pure PCIe guest such as
those using the x86_64/q35 or aarch64/virt machine type;
however, the former should be preferred, as it doesn't need to
obey limitation of real hardware and is completely
architecture-agnostic.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1520821Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Just like the existing areMultipleRootsSupported, this will
allow us to change the results of the driver-agnostic PCI
address allocation logic based on whether the QEMU binary
supports certain features.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

The new controller will not yet be used automatically by
libvirt, but at this point it's already possible to configure
a guest to use it.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

This capability will be set when the pcie-pci-bridge device
is available in the QEMU binary.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

We're going to add a similarly-named attribute later, and we'd
like to be consistent.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

This test shows what happens when you add a traditional PCI
device such as pci-serial to a pure PCIe machine type such
as aarch64/virt.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Instead of first listing the models on their own, and then
listing them again grouped by the libvirt release they were
introduced in, have a single list.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

s/netork/network/
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

When preparing for migration, the libxl driver creates a new TCP listen
socket for the incoming migration by calling virNetSocketNewListenTCP,
passing the destination host name. virNetSocketNewListenTCP calls
virSocketAddrParse to check if the host name is a wildcard address, in
which case it avoids adding the AI_ADDRCONFIG flag to the hints passed to
getaddrinfo. If the host name is not an IP address, virSocketAddrParse
reports an error

error : virSocketAddrParseInternal:121 : Cannot parse socket address
'myhost.example.com': Name or service not known

But virNetSocketNewListenTCP succeeds regardless and the overall migration
operation succeeds.

Introduce virSocketAddrParseAny and use it when simply testing if a host
name/addr is parsable.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Signed-off-by: NJim Fehlig <jfehlig@suse.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1557769

Problem with device mapper targets is that there can be several
other devices 'hidden' behind them. For instance, /dev/dm-1 can
consist of /dev/sda, /dev/sdb and /dev/sdc. Therefore, when
setting up devices CGroup and namespaces we have to take this
into account.

This bug was exposed after Linux kernel was fixed. Initially,
kernel used different functions for getting block device in
open() and ioctl(). While CGroup permissions were checked in the
former case, due to a bug in kernel they were not checked in the
latter case. This changed with the upstream commit of
519049afead4f7c3e6446028c41e99fde958cc04 (v4.16-rc5~11^2~4).
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

This helper fetches dependencies for given device mapper target.

At the same time, we need to provide a dummy log function because
by default libdevmapper prints out error messages to stderr which
we need to suppress.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

We store all JSON numbers as strings. To allow using json libraries
that store them in numeric types, use a more predictable and normalized
value.
Signed-off-by: NJán Tomko <jtomko@redhat.com>

Rather than using virDomainObjListFindByID, let's be more consistent
and return a reffed and locked object. Since we're using the Ref API,
use virDomainObjEndAPI on @dom and not just virObjectUnlock.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
Reviewed-by: NMarc Hartmayer <mhartmay@linux.vnet.ibm.com>

Rather than using virDomainObjListFindByUUID, let's be more consistent
and return a reffed and locked object. Since we're using the Ref API,
use virDomainObjEndAPI on @dom and not just virObjectUnlock.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
Reviewed-by: NMarc Hartmayer <mhartmay@linux.vnet.ibm.com>

For all @dom's fetched from a testDomObjFromDomain because
virDomainObjListRemove will return an unlocked domain object
we should relock it prior to the cleanup label which will use
virDomainObjEndAPI which would Unlock and Unref the passed
object (and we should avoid unlocking an unlocked object).
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
Reviewed-by: NMarc Hartmayer <mhartmay@linux.vnet.ibm.com>

Similarly to 3506f1ec, the contents of 'cmpcontent' may be an empty
string so the following code would access memory out of the array.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

Since RPC support moved out of glibc we need to have explicit deps on
the new packages providing this functionality
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

The qemu command line generator code set disk caching of shareable disks
to 'none' when formatting the command line silently. Move this code to a
common place when preparing the domain definition for startup so that it
does not have to be duplicated.

The new test case shows that the actual cache mode will now be recorded
in the live XML definition.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

Add a new kind of XML output test for the files in qemuxml2argvtest
where we can validate setup and defaults applied when starting up the
VM.

This is achieved by formatting of the definition processed by the
qemuxml2argvtest into a XML and it's compared against files in
qemuxml2startupxmloutdata. This test is automatically executed if the
output file is present and it's skipped otherwise.

The first example test case is created from 'disk-drive-shared' test
case.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

The old qcow2 encryption format was buggy, so the new approach is to use
luks inside qcow2. As it turns out, it didn't require that many changes.

It was necessary to fix the command line formatter to stop mangling the
format when secrets are present and specify the encryption format and
secret in correct format.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

Reject configurations when qemu would not support the image.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

This format is used by the storage driver and other hypervisors but qemu
does not have notion of the 'iso' format and libvirt does not translate
it to anything useful, so it would not work anyways. Users should use
'raw' instead.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

This is a storage driver type, which is not handled in qemu driver
properly. For accessing directories, disk type 'dir' is used instead.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

QEMU does not support it so save us the hassle and forbid it right away.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

It will be necessary to initialize various aspects for the detected
members of the backing chain. Add a function that will handle it and
call it from qemuDomainPrepareDiskSource and qemuDomainDetermineDiskChain
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

For some reason we've decided to silently translate the disk
detect_zeroes mode if it would be invalid. Extract the
logic so that it does not need to be copypasta'd across the code base.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

In some use cases (mostly in tests) it is not required to check the
seclabel definition validity. Add possibility to call
virDomainDiskDefParse without the domain definition.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>