- 18 7月, 2019 25 次提交
-
-
由 Peter Krempa 提交于
When formatting new qcow2 images we need to provide the backing store string which should not contain any authentication or irrelevant data. Add a flag for qemuBlockStorageSourceGetBackendProps which allows to skip the irrelevant data. Signed-off-by: NPeter Krempa <pkrempa@redhat.com> Reviewed-by: NJán Tomko <jtomko@redhat.com>
-
由 Peter Krempa 提交于
The 'blockdev-create' starts a job which creates a storage volume using the given protocol or formats an existing (added) volume with one of the supported storage formats. This patch adds the monitor interaction bits. Signed-off-by: NPeter Krempa <pkrempa@redhat.com> Reviewed-by: NJán Tomko <jtomko@redhat.com>
-
由 Peter Krempa 提交于
This new event is a superset of the BLOCK_JOB* events and also covers jobs which don't bind to a VM disk. In this patch the monitor part is implemented. Signed-off-by: NPeter Krempa <pkrempa@redhat.com> Reviewed-by: NJán Tomko <jtomko@redhat.com>
-
由 Peter Krempa 提交于
Signed-off-by: NPeter Krempa <pkrempa@redhat.com> Reviewed-by: NJán Tomko <jtomko@redhat.com>
-
由 Peter Krempa 提交于
This belongs to the new job management API which can manage also non-block based jobs. Signed-off-by: NPeter Krempa <pkrempa@redhat.com> Reviewed-by: NJán Tomko <jtomko@redhat.com>
-
由 Peter Krempa 提交于
This belongs to the new job management API which can manage also non-block based jobs. Since we'll need to be able to attempt to cancel jobs which potentially were not started (during reconnect) the 'quiet' flag allows to suppress errors reported. Signed-off-by: NPeter Krempa <pkrempa@redhat.com> Reviewed-by: NJán Tomko <jtomko@redhat.com>
-
由 Peter Krempa 提交于
This belongs to the new job management API for generic jobs. The dismiss command is meant to remove a concluded job after we were able to get the final status. Signed-off-by: NPeter Krempa <pkrempa@redhat.com> Reviewed-by: NJán Tomko <jtomko@redhat.com>
-
由 Peter Krempa 提交于
Allow using the delayed dismiss of the job so that we can reap the state even if libvirtd was not running when qemu emitted the job completion event. Signed-off-by: NPeter Krempa <pkrempa@redhat.com> Reviewed-by: NJán Tomko <jtomko@redhat.com>
-
由 Peter Krempa 提交于
Allow using the node name to specify the base and top of the 'commit' operation, allow specifying explicit job name and add support for delayed dismiss of the job so that we can reap the state even if libvirtd was not running when qemu emitted the job completion event. Signed-off-by: NPeter Krempa <pkrempa@redhat.com> Reviewed-by: NJán Tomko <jtomko@redhat.com>
-
由 Peter Krempa 提交于
Allow using the node name to specify the base of the 'stream' operation, allow specifying explicit job name and add support for delayed dismiss of the job so that we can reap the state even if libvirtd was not running when qemu emitted the job completion event. Signed-off-by: NPeter Krempa <pkrempa@redhat.com> Reviewed-by: NJán Tomko <jtomko@redhat.com>
-
由 Peter Krempa 提交于
When querying storage metadata after a block job we re-run virStorageFileGetMetadata on the top level storage file. This means that the workers (virStorageFileGetMetadataInternal) must not overwrite any pointers without freeing them. This was not considered for src->compat and src->features. Fix it and add a comment mentioning that. Signed-off-by: NPeter Krempa <pkrempa@redhat.com> Reviewed-by: NJán Tomko <jtomko@redhat.com> Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Peter Krempa 提交于
The function does not do any cleanup, so replace the 'cleanup' label with return of -1 and the 'done' label with return of 0. Signed-off-by: NPeter Krempa <pkrempa@redhat.com> Reviewed-by: NJán Tomko <jtomko@redhat.com> Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Michal Privoznik 提交于
Since fb9f6ce6 we are including a libxml header file in the network driver but never link with it. This hasn't caused an immediate problem because in the end the network driver links with libvirt.la. But apparently, it's causing a build issue on old Ubuntu. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Michal Privoznik 提交于
This is a very simple completer for completing --cap argument of nodedev-list command. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com> Reviewed-by: NJán Tomko <jtomko@redhat.com> Reviewed-by: NErik Skultety <eskultet@redhat.com>
-
由 Michal Privoznik 提交于
There are more arguments than 'shutdown --mode' that accept a list of strings separated by commas. 'nodedev-list --cap' is one of them. To avoid duplicating code, let's separate interesting bits of virshDomainShutdownModeCompleter() into a function that can then be reused. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com> Reviewed-by: NJán Tomko <jtomko@redhat.com> Reviewed-by: NErik Skultety <eskultet@redhat.com>
-
由 Peter Krempa 提交于
virCommandMassCloseGetFDsLinux fails when running libvird on valgrind with the following message: libvirt: error : internal error: unable to set FD as open: 1024 This is because valgrind opens few file descriptors beyond the limit: 65701125 lr-x------. 1 root root 64 Jul 18 14:48 1024 -> /home/pipo/build/libvirt/gcc/src/.libs/libvirtd 65701126 lrwx------. 1 root root 64 Jul 18 14:48 1025 -> '/tmp/valgrind_proc_3849_cmdline_186612e3 (deleted)' 65701127 lrwx------. 1 root root 64 Jul 18 14:48 1026 -> '/tmp/valgrind_proc_3849_auxv_186612e3 (deleted)' 65701128 lrwx------. 1 root root 64 Jul 18 14:48 1027 -> /dev/pts/11 65701129 lr-x------. 1 root root 64 Jul 18 14:48 1028 -> 'pipe:[65689522]' 65701130 l-wx------. 1 root root 64 Jul 18 14:48 1029 -> 'pipe:[65689522]' 65701131 lr-x------. 1 root root 64 Jul 18 14:48 1030 -> /tmp/vgdb-pipe-from-vgdb-to-3849-by-root-on-angien Ignore bitmap errors in this case since we'd leak those FD's anyways in the previous scenario. Signed-off-by: NPeter Krempa <pkrempa@redhat.com> Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Michal Privoznik 提交于
There are couple of functions that are meant to be exposed but are missing syms file adjustment. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Michal Privoznik 提交于
If there are two paths on the list that are the same we need to lock it only once. Because when we try to lock it the second time then open() fails. And if it didn't, locking it the second time would fail for sure. After all, it is sufficient to lock all paths just once satisfy the caller. Reported-by: NDaniel Henrique Barboza <danielhb413@gmail.com> Signed-off-by: NMichal Privoznik <mprivozn@redhat.com> Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com> Tested-by: NDaniel Henrique Barboza <danielhb413@gmail.com>
-
由 Michal Privoznik 提交于
Document why we need to sort paths while it's still fresh in my memory. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com> Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com> Tested-by: NDaniel Henrique Barboza <danielhb413@gmail.com>
-
由 Julio Faracco 提交于
This commit is similar with 596aa144. It fixes an uninitialized variable to avoid garbage value. This case, it uses time 't' 0 if an error occurs with virTimeMillisNowRaw. Signed-off-by: NJulio Faracco <jcfaracco@gmail.com> Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Cole Robinson 提交于
Reviewed-by: NLaine Stump <laine@laine.org> Signed-off-by: NCole Robinson <crobinso@redhat.com>
-
由 Cole Robinson 提交于
This maps to XML like: <network xmlns:dnsmasq='http://libvirt.org/schemas/network/dnsmasq/1.0'> ... <dnsmasq:options> <dnsmasq:option value="foo=bar"/> <dnsmasq:option value="cname=*.foo.example.com,master.example.com"/> </dnsmasq:options> </network> To dnsmasq config options ... foo=bar cname=*.foo.example.com,master.example.com Reviewed-by: NLaine Stump <laine@laine.org> Signed-off-by: NCole Robinson <crobinso@redhat.com>
-
由 Cole Robinson 提交于
Just the plumbing, no real implementation yet Reviewed-by: NLaine Stump <laine@laine.org> Signed-off-by: NCole Robinson <crobinso@redhat.com>
-
由 Cole Robinson 提交于
Pass an xmlopt argument through all the needed network conf functions, like is done for domain XML handling. No functional change for now Reviewed-by: NLaine Stump <laine@laine.org> Signed-off-by: NCole Robinson <crobinso@redhat.com>
-
由 Cole Robinson 提交于
Just a stub for now that is unused. Add init+cleanup plumbing and demostrate it in bridge_driver.c Reviewed-by: NLaine Stump <laine@laine.org> Signed-off-by: NCole Robinson <crobinso@redhat.com>
-
- 17 7月, 2019 7 次提交
-
-
由 Ján Tomko 提交于
Wrap each release headline in an <a> element with the id set to the release value and page.xsl will take care of the rest. Reported-by: NKashyap Chamarthy <kchamart@redhat.com> Signed-off-by: NJán Tomko <jtomko@redhat.com> Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
-
由 Ján Tomko 提交于
Set a default namespace in the stylesheet instead. Signed-off-by: NJán Tomko <jtomko@redhat.com> Acked-by: NPeter Krempa <pkrempa@redhat.com> Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
-
由 Ján Tomko 提交于
As of commit 7373c4e4 the QEMU driver also supports TSC. Signed-off-by: NJán Tomko <jtomko@redhat.com> Acked-by: NPeter Krempa <pkrempa@redhat.com>
-
由 Ján Tomko 提交于
Signed-off-by: NJán Tomko <jtomko@redhat.com> Acked-by: NPeter Krempa <pkrempa@redhat.com>
-
由 Ján Tomko 提交于
It has not aged well. Signed-off-by: NJán Tomko <jtomko@redhat.com> Acked-by: NPeter Krempa <pkrempa@redhat.com>
-
由 Ján Tomko 提交于
Signed-off-by: NJán Tomko <jtomko@redhat.com> Acked-by: NPeter Krempa <pkrempa@redhat.com>
-
由 Ján Tomko 提交于
Signed-off-by: NJán Tomko <jtomko@redhat.com> Acked-by: NPeter Krempa <pkrempa@redhat.com>
-
- 16 7月, 2019 8 次提交
-
-
由 Ján Tomko 提交于
Having a translation enum full of empty strings seems excessive. Now that the validiation is performed in qemuDomainDeviceDefValidateFS, remove it completely and open-code the two allowed cases. Signed-off-by: NJán Tomko <jtomko@redhat.com> Acked-by: NPeter Krempa <pkrempa@redhat.com>
-
由 Ján Tomko 提交于
Signed-off-by: NJán Tomko <jtomko@redhat.com> Acked-by: NPeter Krempa <pkrempa@redhat.com>
-
由 Ján Tomko 提交于
Move validation of the filesystem device out of qemu_command. Signed-off-by: NJán Tomko <jtomko@redhat.com> Acked-by: NPeter Krempa <pkrempa@redhat.com>
-
由 Ján Tomko 提交于
Introduce two separate variables instead of reusing the same one for clarity. Signed-off-by: NJán Tomko <jtomko@redhat.com> Acked-by: NPeter Krempa <pkrempa@redhat.com>
-
由 Ján Tomko 提交于
This time it only builds one device. Signed-off-by: NJán Tomko <jtomko@redhat.com> Acked-by: NPeter Krempa <pkrempa@redhat.com>
-
由 Ján Tomko 提交于
This function iterates over all filesystems, not just -fsdevs. Rename it to free the name for a function that actually builds fsdevs. Signed-off-by: NJán Tomko <jtomko@redhat.com> Acked-by: NPeter Krempa <pkrempa@redhat.com>
-
由 Ján Tomko 提交于
Commit b27375a9 omitted one zero. Signed-off-by: NJán Tomko <jtomko@redhat.com> Acked-by: NPeter Krempa <pkrempa@redhat.com>
-
由 Ján Tomko 提交于
Use the existing fs9p.xml and fs9p-ccw.xml to run the tests with latest caps on x86_64 and s390x. Signed-off-by: NJán Tomko <jtomko@redhat.com> Acked-by: NPeter Krempa <pkrempa@redhat.com>
-