* src/qemu/qemu_monitor_json.c: Hook up reset, shutdown,
  poweroff and stop events

* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add callbacks
  for reset, shutdown, poweroff and stop events. Add convenience
  methods for emiting those events

With addition of events there will be alot of callbacks.
To avoid having to add many APIs to register callbacks,
provide them all at once in a big table

* src/qemu/qemu_driver.c: Pass in a callback table to QEMU
  monitor code
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h Replace
  the EOF and disk secret callbacks with a callback table

Initial support for the new QEMU monitor protocol  using JSON
as the data encoding format instead of plain text

* po/POTFILES.in: Add src/qemu/qemu_monitor_json.c
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Hack to turn on QMP
  mode. Replace with a version number check on >= 0.12 later
* src/qemu/qemu_monitor.c: Delegate to json monitor if enabled
* src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h: Add
  impl of QMP protocol
* src/Makefile.am: Add src/qemu/qemu_monitor_json.{c,h}

Now that drivers are using a private domain object state blob,
the virDomainObjFormat/Parse methods are no longer able to
directly serialize all neccessary state to/from XML. It is
thus neccessary to introduce a pair of callbacks fo serializing
private state.

The code for serializing vCPU PIDs and the monitor device
config can now move out of domain_conf.c and into the
qemu_driver.c where they belong.

* src/conf/capabilities.h: Add callbacks for serializing private
  state to/from XML
* src/conf/domain_conf.c, src/conf/domain_conf.h: Remove the
  monitor, monitor_chr, monitorWatch, nvcpupids and vcpupids
  fields from virDomainObjPtr. Remove code that serialized
  those fields
* src/libvirt_private.syms: Export virXPathBoolean
* src/qemu/qemu_driver.c: Add callbacks for serializing monitor
  and vcpupid data to/from XML
* src/qemu/qemu_monitor.h, src/qemu/qemu_monitor.c: Pass monitor
  char device config into qemuMonitorOpen directly.

* src/lxc/lxc_driver.c: Introduce lxcDomainObjPrivate for storing
  monitor device state

* src/uml/uml_driver.c: Introduce umlDomainObjPrivateData for storing
  monitor device state. Remove unneccessary VIR_FREE on vcpupids

The code to start CPUs executing has nothing todo with CPU
affinity masks, so pull it out of the qemudInitCpuAffinity()
method and up into qemudStartVMDaemon()

* src/qemu/qemu_driver.c: Pull code to start CPUs executing out
  of qemudInitCpuAffinity()

The current QEMU disk media change does not support setting the
disk format. The new JSON monitor will support this, so add an
extra parameter to pass this info in

* src/qemu/qemu_driver.c: Pass in disk format when changing media
* src/qemu/qemu_monitor.h, src/qemu/qemu_monitor.c,
  src/qemu/qemu_monitor_text.c, src/qemu/qemu_monitor_text.h:
  Add a 'format' arg to qemuMonitorChangeMedia()

* src/qemu/qemu_monitor_text.c: Add missing underscore in the
  migrate_cancel monitor command impl

The qemuMonitorEscape() method, and the VIR_ENUM for migration
status will be needed by the JSON monitor too, so move that code
into the shared qemu_monitor.c file instead of qemu_monitor_text.c

* src/qemu/qemu_monitor.h: Declare qemuMonitorMigrationStatus enum
  and qemuMonitorEscapeArg and qemuMonitorEscapeShell methods
* src/qemu/qemu_monitor.c: Implement qemuMonitorMigrationStatus enum
  and qemuMonitorEscapeArg and qemuMonitorEscapeShell methods
* src/qemu/qemu_monitor_text.c: Remove above methods/enum

If QEMU shuts down while we're in the middle of processing a
monitor command, the monitor will be freed, and upon cleaning
up we attempt to do  qemuMonitorUnlock(priv->mon) when priv->mon
is NULL.

To address this we introduce proper reference counting into
the qemuMonitorPtr object, and hold an extra reference whenever
executing a command.

* src/qemu/qemu_driver.c: Hold a reference on the monitor while
  executing commands, and only NULL-ify the priv->mon field when
  the last reference is released
* src/qemu/qemu_monitor.h, src/qemu/qemu_monitor.c: Add reference
  counting to handle safe deletion of monitor objects

Fix crash on strdup in that case.

configure:     yajl: no
CC     libvirt_util_la-json.lo
util/json.c:32:27: error: yajl/yajl_gen.h: No such file or directory
util/json.c:33:29: error: yajl/yajl_parse.h: No such file or directory

* src/util/json.c: remove the includes if yajl not configured in

This solves the 'nsIEventQueue object is null' error when trying
to connect to a VirtualBox 3.1 hypervisor instance.

* src/util/json.c: Fix ReprotError typo when YAJL is not available

* configure.in: Fix inverted conditional test when yajl is not
  found

This introduces simple API for handling JSON data. There is
an internal data structure 'virJSONValuePtr' which stores a
arbitrary nested JSON value (number, string, array, object,
nul, etc).  There are APIs for constructing/querying objects
and APIs for parsing/formatting string formatted JSON data.

This uses the YAJL library for parsing/formatting from

 http://lloyd.github.com/yajl/

* src/util/json.h, src/util/json.c: Data structures and APIs
  for representing JSON data, and parsing/formatting it
* configure.in: Add check for yajl library
* libvirt.spec.in: Add build requires for yajl
* src/Makefile.am: Add json.c/h
* src/libvirt_private.syms: Export JSON symbols to drivers

Add a --system flag to autogen.sh which gets turned into the args
--prefix=/usr --sysconfdir=/etc --localstatedir=/var to make it
easy to build with settings that match an RPM build

* autogen.sh: Add --system flag

Some of the very useful calls for XML parsing provided by util/xml.[ch]
were not exported as private symbols. This patch fixes this.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

add a set of tests for Xen interface type and model configurations

Xen HVM guests with PV drivers end up with two network interfaces for
each configured interface. One of them being emulated by qemu and the
other one paravirtual. As this might not be desirable, the attached
patch provides a way for users to specify that only paravirtual network
interface should be presented to the guest.

The configuration was inspired by qemu/kvm driver, for which users can
specify model='virtio' to use paravirtual network interface.

The patch adds support for model='netfront' which results in
type=netfront instead of type=ioemu (or nothing for newer xen versions)
in guests native configuration. Xen's qemu ignores interfaces with
type != ioemu and only paravirtual network device will be seen in the
guest.

Four possible configuration scenarios follow:

- no model specified in domain's XML
    - libvirt will behave like before this change; it will set
      type=ioemu for HVM guests on xen host which is not newer than
      XEND_CONFIG_MAX_VERS_NET_TYPE_IOEMU
    - covered by existing tests

- PV guest, any model
    - no functional change, model is passed as is (and ignored by the
      hypervisor)
    - covered by existing tests (e.g., *-net-e1000.*)
- HVM guest, model=netfront
    - type is set to "netfront", model is not specified
    - covered by new *-net-netfront.* tests

- HVM guest, model != netfront
    - type is set to "ioemu", model is passed as is
    - covered by new *-net-ioemu.* tests

The fourth scenario feels like a regression for xen newer than
XEND_CONFIG_MAX_VERS_NET_TYPE_IOEMU as users who had a model specified
in their guest's configuration won't see a paravirtual interface in
their guests any more. On the other hand, the reason for specifying a
model is most likely the fact that they want to use such model which
implies emulated interface. Users of older xen won't be affected at all
as their xen provides paravirtual interface regardless of the type used.

- src/xen/xend_internal.c: add netfront support for the xend backend
- src/xen/xm_internal.c: add netfront support for the XM serialization too

Also fixed serial port configuration which was broken due to recent
change in virDomainChrDef where targetType was newly added.

* src/Makefile.am: add new files
* src/vbox/vbox_driver.c: add case for version 3.1
* src/vbox/vbox_tmpl.c: refactor common patterns into macros, support for
  version 3.1, serial port configuration fix
* src/vbox/vbox_CAPI_v3_1.h, src/vbox/vbox_V3_1.c: generated code

esxVMX_IndexToDiskName handles indices up to 701. This limit comes
from a mapping gap in virDiskNameToIndex:

  sdzy -> 700
  sdzz -> 701
  sdaaa -> 728
  sdaab -> 729

This line in virDiskNameToIndex causes this gap:

  idx = (idx + i) * 26;

Fixing it by altering this line to:

  idx = (idx + (i < 1 ? 0 : 1)) * 26;

Also add a new version of virIndexToDiskName that handles the inverse
mapping for arbitrary indices.

* src/esx/esx_vmx.[ch]: remove esxVMX_IndexToDiskName
* src/util/util.[ch]: add virIndexToDiskName and fix mapping gap
* tests/esxutilstest.c: update test to verify that the gap is fixed

* src/conf/domain_conf.c: don't call virDomainObjUnlock twice
* src/qemu/qemu_driver.c: relock driver lock if an error occurs in
  qemuDomainObjBeginJobWithDriver, enter/exit monitor with driver
  in qemudDomainSave

On kernels with HZ=100, the resolution of sleeps in poll() is
quite bad. Doing a precise check on the expiry time vs the
current time will thus often thing the timer has not expired
even though we're within 10ms of the expected expiry time. This
then causes another pointless sleep in poll() for <10ms. Timers
do not need to have such precise expiration, so we treat a timer
as expired if it is within 20ms of the expected expiry time. This
also fixes the eventtest.c test suite on kernels with HZ=100

* daemon/event.c: Add 20ms fuzz when checking for timer expiry

* docs/drvqemu.html.in: Fix typo describing URI driver protocol

* src/xen/xend_internal.c (xend_op): Add ATTRIBUTE_SENTINEL.

The instruction "See Makefile.am" in libvirt.private_syms
always makes me think that this file is autogenerated
and should not be touched manually. This patch spares
every reader of libvirt.private_syms the hassle of
reading Makefile.am before augmenting libvirt.private_syms.
Signed-off-by: NWolfgang Mauerer <wolfgang.mauerer@siemens.com>
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>

The configuration file setting is overriden by -f or --config, but
not with -c
Signed-off-by: NWolfgang Mauerer <wolfgang.mauerer@siemens.com>

* libvirt-override.c: Add many missing calls to allow threading
  when entering C code, otherwise python blocks & then deadlocks
  when we have an async event to dispatch back into python code.
  Fix return value check for virDomainPinVcpu binding.

* tests/.valgrind.supp: Ignore capng problems

* src/test/test_driver.c: Fix leak of vcpu info, and nodedevice
  info

* src/qemu/qemu_driver.c: Free cgroup ACLs

Commit 790f0b30 causes the contents of
the names array to be freed even on success, resulting in no listing of
defined but inactive Xen domains.

Spotted by Jim Fehlig

* src/qemu/qemu_conf.c: Fix default disk type to be 'FILE'
  again, after previous commit accidentally changed it

* src/qemu/qemu_driver.c: remove the port filter if the network device
  is detached via virDomainDetachDevice.