According to docs, we only support 2 link states for an interface
up/down, 'up' being the default state if link state is unspecified in
domain's XML, so the message when no link state is provided should be
changed a little.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1141119
(cherry picked from commit d9c7f014)

When the domain's source disk type is network, if source protocol is rbd
or sheepdog, the 'if().. break' will end the current case, which lead to
miss check the driver type is raw or qcow2. Libvirt will allow to create
internal snapshot for a running domain with raw format disk which based
on rbd storage.

While both protocols support internal snapshots of the disk qemu is not
able to use it as it requires some place to store the memory image. The
check if the disk is backed by a qcow2 image needs to be executed
always.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1179533Signed-off-by: NShanzhi Yu <shyu@redhat.com>
(cherry picked from commit f7c1410b)

We have this function networkObjFromNetwork() which for given
virNetworkPtr tries to find corresponding virNetworkObjPtr. If no
object is found, a nice error message is printed out:

  no network with matching uuid '$uuid' ($name)

Let's improve the error message produced by networkLookupByUUID to
follow that logic.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
(cherry picked from commit bf1afdd4)

https://bugzilla.redhat.com/show_bug.cgi?id=1197600

So, libvirt uses pid file to track pid of started qemus. Whenever
a domain is started, its pid is put into corresponding pid file.
The pid file path is generated based on domain name and stored
into domain object internals. However, it's not stored in the
status XML and therefore lost on daemon restarts. Hence, later,
when domain is being shut down, the daemon does not know which
pid file to unlink, and the correct pid file is left behind. To
avoid this, lets generate the pid file path again in
qemuProcessReconnect().
Reported-by: NLuyao Huang <lhuang@redhat.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
(cherry picked from commit 63889e0c)

Signed-off-by: NPrerna Saxena <prerna@linux.vnet.ibm.com>
(cherry picked from commit 8672a1e4)

Acked-by: NJán Tomko <jtomko@redhat.com>
Signed-off-by: NPrerna Saxena <prerna@linux.vnet.ibm.com>
(cherry picked from commit 0afa6be8)

In commit edd1295e I've introduced an
XML element that allows to configure state of the network interface
link. Somehow the RNG schema hunk ended up in a weird place in the
network schema definition. Move it to the right place and add a test
case.

Note that the link state is set up via the monitor at VM startup so I
originally didn't think of adding a test case.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1173468
(cherry picked from commit 8eb907b8)

Since adding the support for scheduler policy settings in commit
8680ea97, there are two enums with the same information.  That was
caused by rewriting the patch since first draft.

Find out thanks to clang, but there was no impact whatsoever.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
(cherry picked from commit 2fd5880b)

The problem here was that when opening a channel, we were checking
whether the channel given is alias (can't be NULL for running domain) or
it's name, which can be NULL (for example with spicevmc).  In case of
such domain qemuDomainOpenChannel() made the daemon crash.
STREQ_NULLABLE() is safe to use since the code in question is wrapped in
"if (name)" and is more readable, so use that instead of checking for
non-NULL "vm->def->channels[i]->target.name".
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
(cherry picked from commit b3ea0a8f)

https://bugzilla.redhat.com/show_bug.cgi?id=921426

Add to the man page a more complete description of what exactly the
command expects on input and will return on output based on what is
currently supported.

Perhaps missing findPoolSources implementations are backends for
sheepdog and rbd.  Also missing any backend is zfs.

(cherry picked from commit 567bd0fa)

The virStorageBackendISCSIFindPoolSources API only needs the 'host' name
in order to discover iSCSI pools, it returns the various device paths.
On input, it's also possible to further restrict a search by providing the
port attribute for the host element and the (undocumented) initiator element.

For example:

$  virsh find-storage-pool-sources-as iscsi
error: Failed to find any iscsi pool sources
error: invalid argument: hostname and device path must be specified for iscsi sources

$ virsh find-storage-pool-sources-as iscsi 192.168.122.1
<sources>
  <source>
    <host name='192.168.122.1' port='3260'/>
    <device path='iqn.2013-12.com.example:iscsi-chap-lclpool'/>
  </source>
</sources>

(cherry picked from commit 30f69ae8)

https://bugzilla.redhat.com/show_bug.cgi?id=1070695

Modify the virsh man page to more accurately describe which values are
set by the virsh setmem and displayed by the virsh memtune or dominfo
based on the setmem command results.

(cherry picked from commit 69db32f9)

Our documentation isn't 100% clear about hostdev 'managed' attribute usage,
because it only makes sense to use it with PCI devices, yet we format
this attribute to all hostdev devices. By adding a note into the docs,
we can possibly avoid confusion from customer's side and also avoid a solution
using ternary logic.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1155887
(cherry picked from commit ccfe9e48)

If the domain is not running, the agent will not respond.
Do not even try.

https://bugzilla.redhat.com/show_bug.cgi?id=872424
(cherry picked from commit 72352232)

Not just the DomainObj's private data.

(cherry picked from commit fbb94044)

This way checks requiring the job can be done in qemuDomainAgentAvailable.

(cherry picked from commit c8b80b49)

Trying to use qemu:///session to create a storage pool pointing at
/tmp will usually fail with something like:

$ virsh pool-start tmp
error: Failed to start pool tmp
error: cannot open volume '/tmp/systemd-private-c38cf0418d7a4734a66a8175996c384f-colord.service-kEyiTA': Permission denied

If any volume in an FS pool can't be opened by the daemon, the refresh
fails, and the pool can't be used.

This causes pain for virt-install/virt-manager though. Imaging a user
downloads a disk image to /tmp. virt-manager wants to import /tmp as
a storage pool, so we can detect what disk format it is, and set the
XML correctly. However this case will likely fail as explained above.

Change the logic here to skip volumes that fail to open. This could
conceivably cause user complaints along the lines of 'why doesn't
libvirt show $ROOT-OWNED-VOLUME-FOO', but figuring that currently
the pool won't even startup, I don't think there are any current
users that care about that case.

https://bugzilla.redhat.com/show_bug.cgi?id=1103308
(cherry picked from commit 56476f6a)

When parsing XML, we validate the passed ostype + arch combo against
the detected hypervisor capabilities. This has led to the following
problem:

- Define x86 qemu guest
- qemu is inadvertently removed from the host
- libvirtd is restarted. fails to parse VM config since arch is removed
- 'virsh list --all' is now empty, user is wondering where their VMs went

Add a new internal flag VIR_DOMAIN_DEF_PARSE_SKIP_OSTYPE_CHECKS. Use
it when loading VM and snapshot configs from disk.

https://bugzilla.redhat.com/show_bug.cgi?id=1043572
(cherry picked from commit f1a89a8b)

If no <os><type> was specified:
  before: unknown OS type no OS type
  after : xml error: an os <type> must be specified

If an <os><type> is specified that's not in our capabiliities data:
  before: unknown OS type: $type
  after : unsupported configuration: no support found for os <type> '$type'

VIR_ERR_OS_TYPE is now unused (as it should be frankly) so drop its strings
as well to save our translators some effort.

(cherry picked from commit 3700c065)

Fedora doesn't ship OVMF/AAVMF builds in its repos due to licensing
issues, so the recommended way to consume these bits is via Gerd's
nightly repo: https://www.kraxel.org/repos

Let's teach fedora builds about the loader/nvram pairs these packages
installed, so users don't need to edit qemu.conf to get virt-manager
UEFI support.

(cherry picked from commit f93e1211)

(cherry picked from commit ce452877)

(cherry picked from commit 714668b5)

QEMU 2.3 adds these new models to cover Haswell and Broadwell CPUs with
updated microcode. Luckily, they also reverted former the machine type
specific changes to existing models. And since these changes were never
released, we don't need to hack around them in libvirt.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
(cherry picked from commit c563b506)

https://bugzilla.redhat.com/show_bug.cgi?id=1209948

So we have this bug. The virConnectGetDomainCapabilities() API
performs a couple of checks before it produces any result. One of
the checks is if the architecture requested by user can be run by
the binary (again user provided). However, the check is pretty
dumb. It merely compares if the default binary architecture
matches the one provided by user. However, a qemu binary can run
multiple architectures. For instance: qemu-system-ppc64 can run:
ppc, ppcle, ppc64, ppc64le and ppcemb. The default is ppc64, so
if user requested something else, like ppc64le, the check would
have failed without obvious reason.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
(cherry picked from commit 0af9325e)

The fake object is used to pass the domain name and UUID to the ACL code
for events where we don't have the full domain def when dispatching
events. The rest of the entries would be left uninitialized. While this
is not a problem code-wise as the used fields are initialized it looks
ugly in the debugger.

(cherry picked from commit 6ca857c7)

Don't unref the old identity unless we set the new one correctly and
unref the new one on failure to set it so that we don't leak any
references or use invalid pointers.

(cherry picked from commit ad886fa6)

- Remove all qemu emulators
- Restart libvirtd
- Install qemu emulators
- Call 'virsh version' -> errors

The only thing that will force the qemu driver to refresh it's cached
capablities info is an explict API call to GetCapabilities.

However in the case when the initial caps lookup at driver connect didn't
find a single qemu emulator to poll, the driver is effectively useless
and really can't do anything until it's populated some qemu capabilities
info.

With the above steps, the user would have to either know about the
magic refresh capabilities call, or restart libvirtd to pick up the
changes.

Instead, this patch changes things so that every time a part of th
driver requests access to capabilities info, check to see if
we've previously seen any emulators. If not, force a refresh.

In the case of 'still no emulators found', this is still very quick, so
I can't think of a downside.

https://bugzilla.redhat.com/show_bug.cgi?id=1000116
(cherry picked from commit 95546c43)
(cherry picked from commit 9ebc1631)

Similar to what was done for the channel socket in the previous commit.

(cherry picked from commit 19425d11)

Rather than depend on the RPM to put it in place, since this doesn't
cover the qemu:///session case. Currently auto allocated socket path is
completely busted with qemu:///session

https://bugzilla.redhat.com/show_bug.cgi?id=1105274

And because we chown the directory at driver startup now, this also fixes
autosocket startup failures when using user/group=root

https://bugzilla.redhat.com/show_bug.cgi?id=1044561
https://bugzilla.redhat.com/show_bug.cgi?id=1146886
(cherry picked from commit e31ab02f)

==19015== 968 (416 direct, 552 indirect) bytes in 1 blocks are definitely lost in loss record 999 of 1,049
==19015==    at 0x4C2C070: calloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==19015==    by 0x52ADF14: virAllocVar (viralloc.c:560)
==19015==    by 0x5302FD1: virObjectNew (virobject.c:193)
==19015==    by 0x1DD9401E: virQEMUDriverConfigNew (qemu_conf.c:164)
==19015==    by 0x1DDDF65D: qemuStateInitialize (qemu_driver.c:666)
==19015==    by 0x53E0823: virStateInitialize (libvirt.c:777)
==19015==    by 0x11E067: daemonRunStateInit (libvirtd.c:905)
==19015==    by 0x53201AD: virThreadHelper (virthread.c:206)
==19015==    by 0xA1EE1F2: start_thread (in /lib64/libpthread-2.19.so)
==19015==    by 0xA4EFC8C: clone (in /lib64/libc-2.19.so)
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
(cherry picked from commit 225aa802)

Not sure if this is required, but it makes things consistent with the
rest of the directories.

(cherry picked from commit db3ccd58)

Rather than duplicate libDir for each new path

(cherry picked from commit c19f43ae)

These cannot be represented in XML.

We have been stripping them, but only if the string had
characters that needed escaping: <>"'&

Extend the strcspn check to include control codes, and strip
them even if we don't do any escaping.

https://bugzilla.redhat.com/show_bug.cgi?id=1184131
https://bugzilla.redhat.com/show_bug.cgi?id=1066564
(cherry picked from commit aeb5262e)

The current auto-indentation buffer code applies indentation only on
complete strings. To allow adding a string containing newlines and
having it properly indented this patch adds virBufferAddStr.

(cherry picked from commit 6ff59cbc)

To prevent generating invalid XML.

https://bugzilla.redhat.com/show_bug.cgi?id=1066564
(cherry picked from commit 60db2bc8)

Including them in the XML makes them unparsable.

https://bugzilla.redhat.com/show_bug.cgi?id=1184131
(cherry picked from commit 55710750)

Add virStringHasControlChars that checks if the string has
any control characters other than \t\r\n,
and virStringStripControlChars that removes them in-place.

(cherry picked from commit 2a530a3e)

For reuse with other Strip* functions.

(cherry picked from commit e892842d)

 # virsh -c lxc:/// start helloworld
 error: Failed to start domain helloworld
 error: internal error: guest failed to start: Unknown
 failure in libvirt_lxc startup

Return success when there are no cpuset.mems to be set,
instead of failing without setting an error.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
(cherry picked from commit 930e8697)

 # virsh -c lxc:/// start helloworld
 error: Failed to start domain helloworld
 error: internal error: guest failed to start: Invalid value '1-3'
 for 'cpuset.mems': Invalid argument

Free the cpu mask to avoid reusing it as a mem mask
in virCgroupSetCpusetMems
if virDomainNumatuneMaybeFormatNodeset does not set a mask.
Signed-off-by: NLuyao Huang <lhuang@redhat.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>
(cherry picked from commit 461eafec)