Making this change makes it easier to spot the memory leaks
that will be fixed in the next patch.

* cfg.mk (sc_prohibit_xmlGetProp): New rule.
* .x-sc_prohibit_xmlGetProp: New exception.
* Makefile.am (EXTRA_DIST): Ship exception file.
* tools/virsh.c (cmdDetachInterface, cmdDetachDisk): Adjust
offenders.
* src/conf/storage_conf.c (virStoragePoolDefParseSource):
Likewise.
* src/conf/network_conf.c (virNetworkDHCPRangeDefParseXML)
(virNetworkIPParseXML): Likewise.

https://bugzilla.redhat.com/show_bug.cgi?id=656795

* src/qemu/qemu_monitor.c (qemuMonitorFree): Also free the buffer.

* Makefile.am (EXTRA_DIST): Factor exceptions files...
(syntax_check_excpetions): into new list.  Include recently added
exceptions.
* cfg.mk (sc_x_sc_dist_check): New check, copied from coreutils.

* cfg.mk (sc_prohibit_close): New syntax-check rule.
* src/util/pci.c (pciWaitForDeviceCleanup): Fix violation.
* .x-sc_prohibit_close: New exceptions.
* Makefile.am (EXTRA_DIST): Distribute new file.

virConnectClose calls virUnrefConnect which in turn closes
all open drivers when the refcount of that connection dropped
to zero. This works fine when you free all other objects that
hold a ref to the connection before you close it, because in
this case virUnrefConnect is the one that removes the last
ref to the connection.

But it doesn't work when you close the connection first before
freeing the other objects. This is because the other virUnref*
functions call virReleaseConnect when they detect that the
connection's refcount dropped to zero. In this case another
virUnref* function (different from virUnrefConnect) removes the
last ref to the connection. This results in not closing the
open drivers and leaking things that should have been cleaned
up in the driver close functions.

To fix this move the driver close calls to virReleaseConnect.

Except LXC and UML driver, implementations of all other drivers
simply return 0, because these drivers doesn't have config both
in memory and on disk, no need to track if the domain of these
drivers updated or not.

Rename "xenUnifiedDomainisPersistent" to "xenUnifiedDomainIsPersistent"

* esx/esx_driver.c
* lxc/lxc_driver.c
* opennebula/one_driver.c
* openvz/openvz_driver.c
* phyp/phyp_driver.c
* test/test_driver.c
* uml/uml_driver.c
* vbox/vbox_tmpl.c
* xen/xen_driver.c
* xenapi/xenapi_driver.c

* src/qemu/qemu_driver.c (add function qemuDomainIsUpdated)

* daemon/remote.c
* daemon/remote_dispatch_args.h
* daemon/remote_dispatch_prototypes.h
* daemon/remote_dispatch_ret.h
* daemon/remote_dispatch_table.h
* src/remote/remote_driver.c
* src/remote/remote_protocol.c
* src/remote/remote_protocol.h
* src/remote/remote_protocol.x
* src/remote_protocol-structs

* src/libvirt.c

* src/driver.h (new typedef, new callback member for "_virDriver")
* src/esx/esx_driver.c
* src/lxc/lxc_driver.c
* src/opennebula/one_driver.c
* src/openvz/openvz_driver.c
* src/phyp/phyp_driver.c
* src/qemu/qemu_driver.c
* src/remote/remote_driver.c
* src/test/test_driver.c
* src/uml/uml_driver.c
* src/vbox/vbox_tmpl.c
* src/xen/xen_driver.c
* src/xenapi/xenapi_driver.c

introduce new public API "virDomainIsUpdated"

* src/conf/domain_conf.h (new member "updated" for "virDomainObj")
* src/libvirt_public.syms
* include/libvirt/libvirt.h.in

* src/libvirt_private.syms (buf.h): Sort.

gnulib wraps Windows' SOCKET handle based send() and recv() functions
into file descriptor based ones that are used in libvirt.

Even though GnuTLS is using gnulib too, it explicitly doesn't use
gnulib's replacement functions on Windows. By default GnuTLS uses the
SOCKET handle based send() and recv(). This makes gnutls_handshake()
fail internally with a WSAENOTSOCK error because libvirt passes a
file descriptor; GnuTLS needs the SOCKET handle.

To avoid this mismatch make sure that GnuTLS uses gnulib's replacment
functions, by setting custom pull() and push() functions for GnuTLS.

Without this fix, the test suite doesn't print error messages when a libvirt
function fails. Additionally, only print error reports if DEBUG or VERBOSE
requested.

* daemon/libvirtd.c (qemudRunLoop): Pass allocation size, not
current count, to VIR_SHRINK_N.
* docs/hacking.html.in: Update doc example.
* HACKING: Regenerate.

The stdio.h header has a function called 'remove' declared. This
clashes with the 'remove' parameter in virShrinkN

* src/util/memory.c: Rename 'remove' to 'toremove'

* src/util/memory.c: Avoid 32-bit truncation extracting a 64bit int

virsh was not checking for a error code when listing storage
volumes. So when listing volumes in a pool that was shutoff,
no output was displayed

* tools/virsh.c: Fix error handling when listing volumes

The SCSI volumes currently get a name like '17:0:0:1' based
on $host:$bus:$target:$lun. The names are intended to be unique
per pool and stable across pool restarts. The inclusion of the
$host component breaks this, because the $host number for iSCSI
pools is dynamically allocated by the kernel at time of login.
This changes the name to be 'unit:0:0:1', ie removes the leading
host component. The 'unit:' prefix is just to ensure the volume
name doesn't start with a number and make it clearer when seen
out of context.

* src/storage/storage_backend_scsi.c: Improve volume name
  field value stability and uniqueness

Many operations are not valid on inactive storage pools. The
storage driver is currently returning VIR_ERR_INTERNAL_ERROR
in these cases, rather than the more suitable error code
VIR_ERR_OPERATION_INVALID

* src/storage/storage_driver.c: Fix error code when pool
  is not active

When libvirt starts up all storage pools default to the inactive
state, even if the underlying storage is already active on the
host. This introduces a new API into the internal storage backend
drivers that checks whether a storage pool is already active. If
the pool is active at libvirtd startup, the volume list will be
immediately populated.

* src/storage/storage_backend.h: New internal API for checking
  storage pool state
* src/storage/storage_driver.c: Check whether a pool is active
  upon driver startup
* src/storage/storage_backend_fs.c, src/storage/storage_backend_iscsi.c,
  src/storage/storage_backend_logical.c, src/storage/storage_backend_mpath.c,
  src/storage/storage_backend_scsi.c: Add checks for pool state

The "find-storage-pool-sources-as" command takes two arguments,
a hostname and a port number. For some reason the code would
also then look for a port number appended to the hostname
string by searching for ':'. This totally breaks if the user
gives an IPv6 address, and is redundant, since you can already
provide a port as a separate argument

* tools/virsh.c: Remove bogus port number handling code

Allow an iSCSI initiator IQN to be set with the XML for the
find-storage-pool-sources-as virsh command

* tools/virsh.c: Add iSCSI IQN support

The code generating XML for storage pool source discovery is
hardcoded to only allow a hostname and optional port number.
Refactor this code to make it easier to add support for extra
parameters.

* tools/virsh.c: Refactor XML generator

Since the previous patch added support for parsing the output of
the 'sendtargets' command, it is now trivial to support the
storage pool discovery API.

Given a hostname and optional portnumber and initiator IQN,
the code can return a full list of storage pool source docs,
each one representing a iSCSI target.

* src/storage/storage_backend_iscsi.c: Wire up target
  auto-discovery

The Linux iSCSI initiator toolchain has the dubious feature that
if you ever run the 'sendtargets' command to merely query what
targets are available from a server, the results will be recorded
in /var/lib/iscsi. Any time the '/etc/init.d/iscsi' script runs
in the future, it will then automatically login to all those
targets. /etc/init.d/iscsi is automatically run whenever a NIC
comes online.

So from the moment you ask a server what targets are available,
your client will forever more automatically try to login to all
targets without ever asking if you actually want it todo this.

To stop this stupid behaviour, we need to run

  iscsiadm --portal $PORTAL --target $TARGET
   --op update --name node.startup --value manual

For every target on the server.

* src/storage/storage_backend_iscsi.c: Disable automatic login
  for targets found as a result of a 'sendtargets' command

The following series of patches are adding significant
extra functionality to the iSCSI driver. THe current
internal helper methods are not sufficiently flexible
to cope with these changes. This patch refactors the
code to avoid needing to have a virStoragePoolObjPtr
instance as a parameter, instead passing individual
target, portal and initiatoriqn parameters.

It also removes hardcoding of port 3260 in the portal
address, instead using the XML value if any.

* src/storage/storage_backend_iscsi.c: Refactor internal
  helper methods

The XML docs describe a 'port' attribute for the
storage source <host> element, but the parser never
handled it.

* docs/schemas/storagepool.rng: Define port attribute
* src/conf/storage_conf.c: Add missing parsing/formatting
  of host port number
* src/conf/storage_conf.h: Remove bogus/unused 'protocol' field

libvirtd no longer deals with SIGCHLD in its signal handler
since the QEMU driver switched to always daemonize processes.
Thus remove the sigaction for it, to avoid warning log
messages

* daemon/libvirtd.c: Don't catch SIGCHLD

When running non-root, the QEMU log file is usually opened with
truncation, since there is no logrotate for non-root usage.
This means that when libvirt logs the shutdown timestamp, the
log is accidentally truncated

* src/qemu/qemu_driver.c: Never truncate log file with shutdown
  message

The QEMU logger appends a ':' to the timestamp when it deems
it neccessary, so the virTimestamp API should not duplicate
this

* src/util/util.c: Remove trailing ':' from timestamp

Everytime a public API returns an error, libvirtd pollutes
syslog with that error message. Reduce the error logging
level to INFO so these don't appear by default.

* src/util/virterror.c: Log all errors at INFO

The virFork call resets all logging handlers that may have been
set. Re-enable them after fork in virExec, so that env variables
fir LIBVIRT_LOG_OUTPUTS and LIBVIRT_LOG_FILTERS take effect
until the execve()

* src/util/util.c: Preserve logging in child in virExec

To allow messages from different threads to be untangled,
include an integer thread identifier in log messages.

* src/util/logging.c: Include thread ID
* src/util/threads.h, src/util/threads.h, src/util/threads-pthread.c:
  Add new virThreadSelfID() function
* configure.ac: Check for sys/syscall.h

Currently changes to the persistent config aren't flushed to disk, meaning
they are lost if the domain is redefined or libvirtd is restarted.

Do this by adding a helper function to get the persistent domain config. This
should be useful for other functions that may eventually want to alter
the persistent domain config (attach/detach device). Also make similar changes
to the test drivers setvcpus command.

A caveat is that the function will return the running config for a transient
domain, rather than error. This simplifies callers, as long as they use
other methods to ensure the guest is persistent.

Doing 'virsh setvcpus $vm --config 10' doesn't check the value against the
domains maxvcpus value. A larger value for example will prevent the guest
from starting.

Also make a similar change to the test driver.

The current semantics of non-persistent hotplug/update are confusing: the
changes will persist as long as the in memory domain definition isn't
overwritten. This means hotplug changes stay around until the domain is
redefined or libvirtd is restarted.

Call virDomainObjSetDefTransient at VM startup, so that we properly discard
hotplug changes when the VM is shutdown.

This function sets the running domain definition as transient, by reparsing
the persistent config and assigning it to newDef. This ensures that any
changes made to the running definition and not the persistent config are
discarded when the VM is shutdown.