- 25 5月, 2017 2 次提交
-
-
由 Michal Privoznik 提交于
The checks are scattered all over the place. Move them into a single function. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Chen Hanxiao 提交于
Many vendor id's and product id's have leading zeros. We should show them in the logs. Signed-off-by: NChen Hanxiao <chenhanxiao@gmail.com> Reviewed-by: NLaine Stump <laine@laine.org>
-
- 24 5月, 2017 10 次提交
-
-
由 Yi Wang 提交于
The @meminfo allocated in qemuMonitorGetMemoryDeviceInfo() may be lost when qemuDomainObjExitMonitor() failed. Signed-off-by: NYi Wang <wang.yi59@zte.com.cn> Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 John Ferlan 提交于
https://bugzilla.redhat.com/show_bug.cgi?id=1420740 Testing found an inventive way to cause an error at shutdown by providing the parent name for the fc host creation using the "same name" as the HBA. Since the code thus assumed the parent host name provided was the parent HBA and just extracted out the host number and sent that along to the vport_destroy this avoided checks made for equality. So just add the equality check to that path to resolve.
-
由 Pavel Hrdina 提交于
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
-
由 Peter Krempa 提交于
While most of the APIs are okay with 16M messages, the bulk stats API can run into the limit in big configurations. Before we devise a new plan for this, bump this limit slightly to accomodate some more configs.
-
由 Pavel Hrdina 提交于
If the first console is just a copy of the first serial device we don't need to iterate over the same device twice in order to perform actions like security labeling, cgroup configuring, etc. Currently only security SELinux manager was aware of this fact. Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
-
由 Konstantin Neumoin 提交于
No need begin job for asynchronous operation. Signed-off-by: NKonstantin Neumoin <kneumoin@virtuozzo.com>
-
由 Konstantin Neumoin 提交于
Put domain access after acquiring job condition, otherwise another job can change it meanwhile. Signed-off-by: NKonstantin Neumoin <kneumoin@virtuozzo.com> Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Konstantin Neumoin 提交于
We have to use waitDomainJob instead of waitJob, because of it unlock the domain until job has finished, so domain will be available for other clients. Signed-off-by: NKonstantin Neumoin <kneumoin@virtuozzo.com>
-
由 Peter Krempa 提交于
Setting the 'group_name' for a disk would falsely trigger a error path as in commit 4b57f765 we did not properly check the return value of VIR_STRDUP.
-
由 Jim Fehlig 提交于
Attempting to start a domain with USB hostdevs but no USB controllers fails with the rather cryptic error libxl: error: libxl_qmp.c:287:qmp_handle_error_response: received an error message from QMP server: Bus 'xenusb-0.0' not found This can be fixed by creating default USB controllers. When no USB controllers are defined, create the number of 8 port controllers necessary to accommodate the number of defined USB devices. Note that USB controllers are already created as needed in the domainAttachDevice code path. E.g. a USB controller will be created, if necessary, when attaching a USB device with 'virsh attach-device dom usbdev.xml'.
-
- 23 5月, 2017 6 次提交
-
-
由 Peter Krempa 提交于
Otherwise the private data entry would be kept across instances of the same VM even if it's not configured to do so. Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1453142
-
由 Kothapally Madhu Pavan 提交于
priv and qemuCaps variables are not used anymore. Signed-off-by: NKothapally Madhu Pavan <kmp@linux.vnet.ibm.com>
-
由 Laine Stump 提交于
This reverts commit 2841e675. It turns out that adding the host_mtu field to the PCI capabilities in the guest bumps the length of PCI capabilities beyond the 32 byte boundary, so the virtio-net device gets 64 bytes of ioport space instead of 32, which offsets the address of all the other following devices. Migration doesn't work very well when the location and length of PCI capabilities of devices is changed between source and destination. This means that we need to make sure that the absence/presence of host_mtu on the qemu commandline always matches between source and destination, which means that we need to make setting of host_mtu an opt-in thing (it can't happen automatically when the bridge being used has a non-default MTU, which is what commit 2841e675 implemented). I do want to re-implement this feature with an <mtu auto='on'/> setting, but probably won't backport that to any stable branches, so I'm first reverting the original commit, and that revert can be pushed to the few releases that have been made since the original (3.1.0 - 3.3.0) Resolves: https://bugzilla.redhat.com/1449346
-
由 Jim Fehlig 提交于
If a VNC listen address is not specified in domXML, libxl will default to 127.0.0.1, but this is never reflected in the domXML. In the case of spice, a missing listen address resulted in listening on all interfaces, i.e. '0.0.0.0'. If not specified, set the listen address in virDomainGraphicsDef struct to the libxl default when creating the frame buffer device. Additionally, set default spice listen address to 127.0.0.1.
-
由 Jim Fehlig 提交于
Use a macro instead of hardcoding "127.0.0.1" throughout the sources.
-
由 Daniel P. Berrange 提交于
The current README file contents has almost no useful info, and that which does exist is very outdated. Reviewed-by: NAndrea Bolognani <abologna@redhat.com> Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
- 22 5月, 2017 7 次提交
-
-
由 Michal Privoznik 提交于
There's a slight problem with the current function. Assume we are currently in a data section and we have say 42 bytes until next section. Therefore, just before (handler) is called to fill up the buffer with data, @want is changed to 42 to match the amount of data left in the current section. However, after hole is processed, we are back in data section but with incredibly small @want size. Nobody will ever reset it back. This results in incredible data fragmentation. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Andrea Bolognani 提交于
Commit 6fb5dd4f removed docs/archnetwork.html.in, but left behind a pointer to it in docs/formatnetwork.html.in. Update it so that it points to the wiki, which contains more detailed and recent information anyway.
-
由 Michal Privoznik 提交于
To every virDirOpen we must have VIR_DIR_CLOSE otherwise FD is leaked. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com> Reviewed-by: NPavel Hrdina <phrdina@redhat.com>
-
由 Ján Tomko 提交于
Only set releaseaddr to true after the address has been reserved successfully. https://bugzilla.redhat.com/show_bug.cgi?id=1452581Reviewed-by: NJohn Ferlan <jferlan@redhat.com>
-
由 Peter Krempa 提交于
The error message would contain first vcpu id after the list of vcpus selected for modification. To print the proper vcpu id remember the first vcpu selected to be modified.
-
由 Wang King 提交于
@reply is a DBusMessage object returned by virDBusCallMethod in get machine object call path, dereference it before calling virDBusCallMethod again to get machine name. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Julio Faracco 提交于
Both variables for gcov and oom have wrong names inside configure.ac. For this reason, the Test Suite configuration is not showing the current configuration. Before patching: configure: windres: no configure: configure: Test suite configure: configure: Coverage: configure: Alloc OOM: configure: configure: Miscellaneous After patching (using --enable-test-coverage and --enable-test-oom): configure: windres: no configure: configure: Test suite configure: configure: Coverage: yes configure: Alloc OOM: yes configure: configure: Miscellaneous Signed-off-by: NJulio Faracco <jcfaracco@gmail.com>
-
- 19 5月, 2017 9 次提交
-
-
由 Wim ten Have 提交于
It is possible to crash libvirtd when converting xl native config to domXML when the xl config contains an empty disk source, e.g. an empty CDROM. Fix by checking that the disk source is non-NULL before parsing it. Signed-off-by: NWim ten Have <wim.ten.have@oracle.com>
-
由 Michal Privoznik 提交于
On systems with older glibc including fcntl.h for getting FALLOC_FL_PUNCH_HOLE defined is not enough. We must also include linux/falloc.h. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Michal Privoznik 提交于
Yet another place where we need to wrap code in HAVE_DECL_SEEK_HOLE block. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Michal Privoznik 提交于
Some older systems (such as RHEL6) lack SEEK_HOLE and SEEK_DATA which virFileInData relies on. Provide a stub for these systems. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Peter Krempa 提交于
Enums are unsigned, so it's impossible to check whether the helper returned -1 for invalid conversions. Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1452454
-
由 Felix Geyer 提交于
Add explicit denies for disk devices to avoid cluttering dmesg with (acceptable) denials. Signed-off-by: NChristian Ehrhardt <christian.ehrhardt@canonical.com> Signed-off-by: NStefan Bader <stefan.bader@canonical.com> Acked-by: NGuido Günther <agx@sigxcpu.org>
-
由 Felix Geyer 提交于
Allow access to libnl-3 config files Signed-off-by: NChristian Ehrhardt <christian.ehrhardt@canonical.com> Signed-off-by: NStefan Bader <stefan.bader@canonical.com> Acked-by: NGuido Günther <agx@sigxcpu.org>
-
由 Peter Krempa 提交于
The code causes the 'offset' variable to be overwritten (possibly with NULL if neither of the vCPUs is halted) which causes a crash since the variable is still used after that part. Additionally there's a bug, since strstr() would look up the '(halted)' string in the whole string rather than just the currently processed line the returned data is completely bogus. Rather than switching to single line parsing let's remove the code altogether since it has a commonly used JSON monitor alternative and the data itself is not very useful to report. The code was introduced in commit cc5e695b Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1452106
-
由 Julio Faracco 提交于
There is a wrong 'return' statement after a 'goto' statement inside the function virConnectCloseCallbackDataRegister(). This commit only removes the 'return'. Signed-off-by: NJulio Faracco <jcfaracco@gmail.com>
-
- 18 5月, 2017 6 次提交
-
-
由 Michal Privoznik 提交于
Currently, we don't assign any meaning to that. Our current view on virStream is that it's merely a pipe. And pipes don't support seeking. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Michal Privoznik 提交于
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Erik Skultety 提交于
GCC 4.6 complains about a local declaration shadowing a global symbol. Signed-off-by: NErik Skultety <eskultet@redhat.com>
-
由 Erik Skultety 提交于
https://bugzilla.redhat.com/show_bug.cgi?id=1452072Signed-off-by: NErik Skultety <eskultet@redhat.com>
-