If we have <choice/> with just one value to chose from, it's no
choice.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Similar to scsi_host and fc_host, there is a relation between a
scsi_target and its transport specific fc_remote_port. Let's expose this
relation and relevant information behind it.

An example for a virsh nodedev-dumpxml:

    virsh # nodedev-dumpxml scsi_target0_0_0
    <device>
      <name>scsi_target0_0_0</name>
      <path>/sys/devices/[...]/host0/rport-0:0-0/target0:0:0</path>
      <parent>scsi_host0</parent>
      <capability type='scsi_target'>
        <target>target0:0:0</target>
        <capability type='fc_remote_port'>
          <rport>rport-0:0-0</rport>
          <wwpn>0x9d73bc45f0e21a86</wwpn>
        </capability>
      </capability>
    </device>
Reviewed-by: NBoris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Signed-off-by: NBjoern Walk <bwalk@linux.vnet.ibm.com>

Make CCW devices available to the node_device driver. The devices are
already seen by udev so let's implement necessary code for detecting
them properly.

Topologically, CCW devices are similar to PCI devices, e.g.:

    +- ccw_0_0_1a2b
        |
        +- scsi_host0
            |
            +- scsi_target0_0_0
                |
                +- scsi_0_0_0_0
Reviewed-by: NBoris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Signed-off-by: NBjoern Walk <bwalk@linux.vnet.ibm.com>

Start discovering the mediated devices on the host system and format the
attributes for the mediated device into the XML. Compared to the parent
device which reports generic information about the abstract mediated
devices types, a child device only reports the type name it has been
instantiated from and the IOMMU group number, since that's device
specific compared to the rest of the info that can be gathered about
mediated devices at the moment.
This patch introduces both the formatting and parsing routines, updates
nodedev.rng schema, adding a testcase as well.

The resulting mdev child device XML:
<device>
  <name>mdev_4b20d080_1b54_4048_85b3_a6a62d165c01</name>
  <path>/sys/devices/.../4b20d080-1b54-4048-85b3-a6a62d165c01</path>
  <parent>pci_0000_06_00_0</parent>
  <driver>
    <name>vfio_mdev</name>
  </driver>
  <capability type='mdev'>
    <type id='vendor_supplied_type_id'/>
    <iommuGroup number='NUM'/>
  <capability/>
<device/>

https://bugzilla.redhat.com/show_bug.cgi?id=1452072Signed-off-by: NErik Skultety <eskultet@redhat.com>

The parent device needs to report the generic stuff about the supported
mediated devices types, like device API, available instances, type name,
etc. Therefore this patch introduces a new nested capability element of
type 'mdev_types' with the resulting XML of the following format:

<device>
  ...
  <capability type='pci'>
    ...
    <capability type='mdev_types'>
      <type id='vendor_supplied_id'>
        <name>optional_vendor_supplied_codename</name>
        <deviceAPI>vfio-pci</deviceAPI>
        <availableInstances>NUM</availableInstances>
      </type>
        ...
      <type>
        ...
      </type>
    </capability>
  </capability>
  ...
</device>

https://bugzilla.redhat.com/show_bug.cgi?id=1452072Signed-off-by: NErik Skultety <eskultet@redhat.com>

Add a new 'drm' capability for Direct Rendering Manager (DRM) devices,
providing device type information.

Teach the udev backend to populate those devices.
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Add new <devnode> top-level <device> element, that list the associated
/dev files. Distinguish the main /dev name from symlinks with a 'type'
attribute of value 'dev' or 'symlink'.

Update a test to check XML schema, and actually add it to the test list
since it was missing.
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>

fabric_name is one of many fc_host attributes in Linux that is optional
and left to the low-level driver to decide if it is implemented.
The zfcp device driver does not provide a fabric name for an fcp host.

This patch removes the requirement for a fabric name by making it optional.
Signed-off-by: NBoris Fiuczynski <fiuczy@linux.vnet.ibm.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1349696

When creating a vHBA, the process is to feed XML to nodeDeviceCreateXML
that lists the <parent> scsi_hostX to use to create the vHBA. However,
between reboots, it's possible that the <parent> changes its scsi_hostX
to scsi_hostY and saved XML to perform the creation will either fail or
create a vHBA using the wrong parent.

So add the ability to provide "wwnn" and "wwpn" or "fabric_wwn" to
the <parent> instead of a name of the scsi_hostN that is the parent.
The allowed XML will thus be:

  <parent>scsi_host3</parent>  (current)

or

  <parent wwnn='$WWNN' wwpn='$WWPN'/>

or

  <parent fabric_wwn='$WWNN'/>

Using the wwnn/wwpn or fabric_wwn ensures the same 'scsi_hostN' is
selected between hardware reconfigs or host reboots. The fabric_wwn
Using the wwnn/wwpn pair will provide the most specific search option,
while fabric_wwn will at least ensure usage of the same SAN, but maybe
not the same scsi_hostN.

This patch will add the new fields to the nodedev.rng for input purposes
only since the input XML is essentially thrown away, no need to Format
the values since they'd already be printed as part of the scsi_host
data block.

New API virNodeDeviceGetParentHostByWWNs will take the parent "wwnn" and
"wwpn" in order to search the list of devices for matching capability
data fields wwnn and wwpn.

New API virNodeDeviceGetParentHostByFabricWWN will take the parent "fabric_wwn"
in order to search the list of devices for matching capability data field
fabric_wwn.

There were few things done in the nodedev code but we were lacking tests
for it.  And because of that we missed that the schema was not updated
either.  Fix the schema and add various test files to show the schema
is correct.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

All sub-PCI capabilities should be next to each other for clarity.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

When reading in an XML definition for a SCSI target device, the name
property of struct scsi_target refers to the @target element.

Let's fix this obvious typo and also extend the XML schema to provide
validation.
Signed-off-by: NBjoern Walk <bwalk@linux.vnet.ibm.com>

If we expose this information, which is one byte in every PCI config
file, we let all mgmt apps know whether the device itself is an endpoint
or not so it's easier for them to decide whether such device can be
passed through into a VM (endpoint) or not (*-bridge).

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1317531Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Adding functionality to libvirt that will allow it
query the ethtool interface for the availability
of certain NIC HW offload features

Here is an example of the feature XML definition:

<device>
<name>net_eth4_90_e2_ba_5e_a5_45</name>
  <path>/sys/devices/pci0000:00/0000:00:03.0/0000:08:00.1/net/eth4</path>
  <parent>pci_0000_08_00_1</parent>
  <capability type='net'>
    <interface>eth4</interface>
    <address>90:e2:ba:5e:a5:45</address>
    <link speed='10000' state='up'/>
    <feature name='rx'/>
    <feature name='tx'/>
    <feature name='sg'/>
    <feature name='tso'/>
    <feature name='gso'/>
    <feature name='gro'/>
    <feature name='rxvlan'/>
    <feature name='txvlan'/>
    <feature name='rxhash'/>
    <capability type='80203'/>
  </capability>
</device>
Signed-off-by: NJán Tomko <jtomko@redhat.com>

Allow reuse of the type.

Add an optional unique_id parameter to nodedev.  Allows for easier lookup
and display of the unique_id value in order to document for use with
scsi_host code.

This new element is there to represent PCI-Express capabilities
of a PCI devices, like link speed, number of lanes, etc.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

While exposing the info under <interface/> in previous patch works, it
may work only in cases where interface is configured on the host.
However, orchestrating application may want to know the link state and
speed even in that case. That's why we ought to expose this in nodedev
XML too:

virsh # nodedev-dumpxml net_eth0_f0_de_f1_2b_1b_f3
<device>
  <name>net_eth0_f0_de_f1_2b_1b_f3</name>
  <path>/sys/devices/pci0000:00/0000:00:19.0/net/eth0</path>
  <parent>pci_0000_00_19_0</parent>
  <capability type='net'>
    <interface>eth0</interface>
    <address>f0:de:f1:2b:1b:f3</address>
    <link speed='1000' state='up'/>
    <capability type='80203'/>
  </capability>
</device>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

A PCI device can be associated with a specific NUMA node. Later, when
a guest is pinned to one NUMA node the PCI device can be assigned on
different NUMA node. This makes DMA transfers travel across nodes and
thus results in suboptimal performance. We should expose the NUMA node
locality for PCI devices so management applications can make better
decisions.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Commit id 'c4a4603d' added an output <path> to the nodedev xml, but
did not update the schema.

This resulted in the failure of the 'virt-xml-validate' on a file
generated by 'virsh nodedev-dumpxml pci_0000_00_00_0' (for example).

This was found/seen by running autotest on my host.

This includes adding it to the nodedev parser and formatter, docs, and
test.

An example of the new iommuGroup element that is a part of the output
from "virsh nodedev-dumpxml" (virNodeDeviceGetXMLDesc()):

  <device>
    <name>pci_0000_02_00_1</name>
    <capability type='pci'>
    ...
      <iommuGroup number='12'>
        <address domain='0x0000' bus='0x02' slot='0x00' function='0x0'/>
        <address domain='0x0000' bus='0x02' slot='0x00' function='0x1'/>
      </iommuGroup>
    </capability>
  </device>

This enrichs HBA's xml by dumping the number of max vports and
vports in use. Format is like:

  <capability type='vport_ops'>
    <max_vports>164</max_vports>
    <vports>5</vports>
  </capability>

* docs/formatnode.html.in: (Document the new XML)
* docs/schemas/nodedev.rng: (Add the schema)
* src/conf/node_device_conf.h: (New member for data.scsi_host)
* src/node_device/node_device_linux_sysfs.c: (Collect the value of
  max_vports and vports)

Just add the head line to let the editor know it's XML document.

* docs/formatdomain.html.in: Add document.
* docs/schemas/nodedev.rng: Move definition of "wwn" to ...
* docs/schemas/basictypes.rng: ...Here
* docs/schemas/domaincommon.rng: Add schema for disk <wwn>

It should be [] instead of ().

capability.rng: Guest features can be in any order.
nodedev.rng: Added <driver> element, <capability> phys_function and
virt_functions for PCI devices.
storagepool.rng: Owner or group ID can be -1.

schema tests: New capabilities and nodedev files; changed owner and
group to -1 in pool-dir.xml.
storage_conf: Print uid_t and gid_t as signed to storage pool XML.

The schema files contained duplicate data types that can be shared from
the basictypes.rng file.

This patch is to expose the fabric_name of fc_host class, which
might be useful for users who wants to known which fabric the
(v)HBA connects to.

The patch also adds the missed capabilities' XML schema of scsi_host,
(of course, with fabric_wwn added), and update the documents
(docs/formatnode.html.in)

* docs/schemas/capability.rng: Likewise.
* docs/schemas/network.rng: Likewise.
* docs/schemas/nodedev.rng: Likewise.
* docs/schemas/storagepool.rng: Likewise.
* docs/schemas/storagevol.rng: Likewise.
Use these commands:
t=$'\t'
git ls-files | grep '\.rng$' | xargs grep -lE "^ *$t" \
  | xargs perl -MText::Tabs -ni -le \
    '$m=/^( *\t[ \t]*)(.*)/; print $m ? expand($1) . $2 : $_'

Provides the CDROM label for current media. Only implemented for the
udev backend.

* docs/schemas/*.rng: the comments were wrong
* src/qemu_conf.c: typo in an error message

* src/node_device_hal.c src/node_device_conf.[ch]: add support
  for serial number in HAL storage backend, patch by Dave Allan
* docs/schemas/nodedev.rng
tests/nodedevschemadata/storage_serial_3600c0ff000d7a2a5d463ff4902000000.xml:
  update the schemas and add a test case, also by Dave Allan
Daniel