- 19 2月, 2016 1 次提交
-
-
由 Cole Robinson 提交于
Seems like the natural fit, since we are already adding other XML bits in the PostParse routine. Previously AddImplicitControllers was only called at the end of XML parsing, meaning code that builds a DomainDef by hand had to manually call it. Now those PostParse callers get it for free. There's some test churn here; xen xm and sexpr test suite bits weren't calling this before, but now they are, so you'll see new IDE controllers. I don't think this will cause problems in practice, since the code already needs to handle these implicit controllers like in the case when a user defines their own XML.
-
- 18 12月, 2015 1 次提交
-
-
由 Jim Fehlig 提交于
Change all tests to use the latest XEND_CONFIG_VERSION (XEND_CONFIG_VERSION_3_1_0 = 4). Fix tests that do not conform to the latest version. Signed-off-by: NJim Fehlig <jfehlig@suse.com>
-
- 09 12月, 2015 1 次提交
-
-
由 Pavel Hrdina 提交于
This change ensures to call driver specific post-parse code to modify domain definition after parsing hypervisor config the same way we do after parsing XML. Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
-
- 10 9月, 2014 1 次提交
-
-
由 Michal Privoznik 提交于
Up to now, users can configure BIOS via the <loader/> element. With the upcoming implementation of UEFI this is not enough as BIOS and UEFI are conceptually different. For instance, while BIOS is ROM, UEFI is programmable flash (although all writes to code section are denied). Therefore we need new attribute @type which will differentiate the two. Then, new attribute @readonly is introduced to reflect the fact that some images are RO. Moreover, the OVMF (which is going to be used mostly), works in two modes: 1) Code and UEFI variable store is mixed in one file. 2) Code and UEFI variable store is separated in two files The latter has advantage of updating the UEFI code without losing the configuration. However, in order to represent the latter case we need yet another XML element: <nvram/>. Currently, it has no additional attributes, it's just a bare element containing path to the variable store file. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com> Acked-by: NLaszlo Ersek <lersek@redhat.com> Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
- 19 2月, 2014 1 次提交
-
-
由 Li Zhang 提交于
There is no keyboard support currently in libvirt. For some platforms (PPC64 QEMU) this makes graphics unusable, since the keyboard is not implicit and it can't be added via libvirt. Signed-off-by: NLi Zhang <zhlcindy@linux.vnet.ibm.com> Signed-off-by: NJán Tomko <jtomko@redhat.com>
-
- 09 5月, 2012 1 次提交
-
-
由 Osier Yang 提交于
<vcpu> is not an optional node. The value for its 'placement' actually always defaults to 'static' in the underlying codes. (Even no 'cpuset' and 'placement' is specified, the domain process will be pinned to all the available pCPUs).
-
- 02 4月, 2012 1 次提交
-
-
由 Philipp Hahn 提交于
XenD-3.1 introduced managed domains. HV-domains have rtc_timeoffset (hgd24f37b31030 from 2007-04-03), which tracks the offset between the hypervisors clock and the domains RTC, and is persisted by XenD. In combination with localtime=1 this had a bug until XenD-3.4 (hg5d701be7c37b from 2009-04-01) (I'm not 100% sure how that bug manifests, but at least for me in TZ=Europe/Berlin I see the previous offset relative to utc being applied to localtime again, which manifests in an extra hour being added) XenD implements the following variants for clock/@offset: - PV domains don't have a RTC → 'localtime' | 'utc' - <3.1: no managed domains → 'localtime' | 'utc' - ≥3.1: the offset is tracked for HV → 'variable' due to the localtime=1 bug → 'localtime' | 'utc' - ≥3.4: the offset is tracked for HV → 'variable' Current libvirtd still thinks XenD only implements <clock offset='utc'/> and <clock offset='localtime'/>, which is wrong, since the semantic of 'utc' and 'localtime' specifies, that the offset will be reset on domain-restart, while with 'variable' the offset is kept. (keeping the offset over "virsh edit" is important, since otherwise the clock might jump, which confuses certain guest OSs) xendConfigVersion was last incremented to 4 by the xen-folks for xen-3.1.0. I know of no way to reliably detect the version of XenD (user space tools), which may be different from the version of the hypervisor (kernel) version! Because of this only the change from 'utc'/'localtime' to 'variable' in XenD-3.1 is handled, not the buggy behaviour of XenD-3.1 until XenD-3.4. For backward compatibility with previous versions of libvirt Xen-HV still accepts 'utc' and 'localtime', but they are returned as 'variable' on the next read-back from Xend to libvirt, since this is what XenD implements: The RTC is NOT reset back to the specified time on next restart, but the previous offset is kept. This behaviour can be turned off by adding the additional attribute adjustment='reset', in which case libvirt will report an error instead of doing the conversion. The attribute can also be used as a shortcut to offset='variable' with basis='...'. With these changes, it is also necessary to adjust the xen tests: "localtime = 0" is always inserted, because otherwise on updates the value is not changed within XenD. adjustment='reset' is inserted for all cases, since they're all < XEND_CONFIG_VERSION_3_1_0, only 3.1 introduced persistent rtc_timeoffset. Some statements change their order because code was moved around. Signed-off-by: NPhilipp Hahn <hahn@univention.de>
-
- 08 3月, 2012 1 次提交
-
-
由 Eric Blake 提交于
Make it obvious to 'dumpxml' readers what unit we are using, since our default of KiB for memory (1024) differs from qemu's default of MiB; and differs from our use of bytes for storage. Tests were updated via: $ find tests/*data tests/*out -name '*.xml' | \ xargs sed -i 's/<\(memory\|currentMemory\|hard_limit\|soft_limit\|min_guarantee\|swap_hard_limit\)>/<\1 unit='"'KiB'>/" $ find tests/*data tests/*out -name '*.xml' | \ xargs sed -i 's/<\(capacity\|allocation\|available\)>/<\1 unit='"'bytes'>/" followed by a few fixes for the stragglers. Note that with this patch, the RNG for <memory> still forbids validation of anything except unit='KiB', since the code silently ignores the attribute; a later patch will expand <memory> to allow scaled input in the code and update the RNG to match. * docs/schemas/basictypes.rng (unit): Add 'bytes'. (scaledInteger): New define. * docs/schemas/storagevol.rng (sizing): Use it. * docs/schemas/storagepool.rng (sizing): Likewise. * docs/schemas/domaincommon.rng (memoryKBElement): New define; use for memory elements. * src/conf/storage_conf.c (virStoragePoolDefFormat) (virStorageVolDefFormat): Likewise. * src/conf/domain_conf.h (_virDomainDef): Document unit used internally. * src/conf/storage_conf.h (_virStoragePoolDef, _virStorageVolDef): Likewise. * tests/*data/*.xml: Update all tests. * tests/*out/*.xml: Likewise. * tests/define-dev-segfault: Likewise. * tests/openvzutilstest.c (testReadNetworkConf): Likewise. * tests/qemuargv2xmltest.c (blankProblemElements): Likewise.
-
- 29 7月, 2011 1 次提交
-
-
由 Laine Stump 提交于
Once it's plugged in, the <listen> element will be an optional replacement for the "listen" attribute that graphics elements already have. If the <listen> element is type='address', it will have an attribute called 'address' which will contain an IP address or dns name that the guest's display server should listen on. If, however, type='network', the <listen> element should have an attribute called 'network' that will be set to the name of a network configuration to get the IP address from. * docs/schemas/domain.rng: updated to allow the <listen> element * docs/formatdomain.html.in: document the <listen> element and its attributes. * src/conf/domain_conf.[hc]: 1) The domain parser, formatter, and data structure are modified to support 0 or more <listen> subelements to each <graphics> element. The old style "legacy" listen attribute is also still accepted, and will be stored internally just as if it were a separate <listen> element. On output (i.e. format), the address attribute of the first <listen> element of type 'address' will be duplicated in the legacy "listen" attribute of the <graphic> element. 2) The "listenAddr" attribute has been removed from the unions in virDomainGRaphicsDef for graphics types vnc, rdp, and spice. This attribute is now in the <listen> subelement (aka virDomainGraphicsListenDef) 3) Helper functions were written to provide simple access (both Get and Set) to the listen elements and their attributes. * src/libvirt_private.syms: export the listen helper functions * src/qemu/qemu_command.c, src/qemu/qemu_hotplug.c, src/qemu/qemu_migration.c, src/vbox/vbox_tmpl.c, src/vmx/vmx.c, src/xenxs/xen_sxpr.c, src/xenxs/xen_xm.c Modify all these files to use the listen helper functions rather than directly referencing the (now missing) listenAddr attribute. There can be multiple <listen> elements to a single <graphics>, but the drivers all currently only support one, so all replacements of direct access with a helper function indicate index "0". * tests/* - only 3 of these are new files added explicitly to test the new <listen> element. All the others have been modified to reflect the fact that any legacy "listen" attributes passed in to the domain parse will be saved in a <listen> element (i.e. one of the virDomainGraphicsListenDefs), and during the domain format function, both the <listen> element as well as the legacy attributes will be output.
-
- 05 12月, 2009 1 次提交
-
-
由 Jiri Denemark 提交于
add a set of tests for Xen interface type and model configurations
-
- 24 4月, 2009 1 次提交
-
-
由 Daniel P. Berrange 提交于
-
- 25 7月, 2008 1 次提交
-
-
由 Daniel P. Berrange 提交于
-
- 08 5月, 2008 1 次提交
-
-
由 Daniel P. Berrange 提交于
-
- 10 8月, 2007 1 次提交
-
-
由 Daniel P. Berrange 提交于
-
- 19 7月, 2007 1 次提交
-
-
由 Daniel P. Berrange 提交于
-
- 17 7月, 2007 1 次提交
-
-
由 Daniel P. Berrange 提交于
-
- 08 6月, 2007 1 次提交
-
-
由 Daniel P. Berrange 提交于
-
- 07 6月, 2007 1 次提交
-
-
由 Daniel P. Berrange 提交于
-
- 20 1月, 2007 1 次提交
-
-
由 Daniel P. Berrange 提交于
-
- 09 10月, 2006 1 次提交
-
-
由 Daniel P. Berrange 提交于
-
- 12 9月, 2006 1 次提交
-
-
由 Daniel P. Berrange 提交于
-
- 24 8月, 2006 1 次提交
-
-
由 Daniel P. Berrange 提交于
-