The virDomainDeviceInfoIterate() function will provide a
convenient way to iterate over all devices in a domain.

* src/conf/domain_conf.c, src/conf/domain_conf.h,
  src/libvirt_private.syms: Add virDomainDeviceInfoIterate()
  function.

Since QEMU startup uses the new -device argument, the hotplug
code needs todo the same. This converts disk, network and
host device hotplug to use the device_add command

* src/qemu/qemu_driver.c: Use new device_add monitor APIs
  whereever possible

The way QEMU is started has been changed to use '-device' and
the new style '-drive' syntax. This needs to be mirrored in
the hotplug code, requiring addition of two new APIs.

* src/qemu/qemu_monitor.h, src/qemu/qemu_monitor.c: Define APIs
  qemuMonitorAddDevice() and qemuMonitorAddDrive()
* src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h,
  src/qemu/qemu_monitor_text.c, src/qemu/qemu_monitor_text.h:
  Implement the new monitor APIs

To allow for better code reuse from hotplug methods, the code for
generating PCI/USB hostdev arg values is split out into separate
methods

* qemu/qemu_conf.h, qemu/qemu_conf.c: Introduce new APis for
  qemuBuildPCIHostdevPCIDevStr, qemuBuildUSBHostdevUsbDevStr
  and qemuBuildUSBHostdevDevStr

All the helper functions for building command line arguments
now return a 'char *', instead of acepting a 'char **' or
virBufferPtr argument

* qemu/qemu_conf.c: Standardize syntax for building args
* qemu/qemu_conf.h: Export all functions for building args
* qemu/qemu_driver.c: Update for changed syntax for building
  NIC/hostnet args

* daemon/libvirtd.c (qemudListenUnix): Close socket only if non-negative.

* src/storage/storage_backend.c (virStorageBackendRunProgRegex):
Don't close a negative (read-only) file descriptor.

* src/qemu/qemu_driver.c (qemudLogReadFD): Don't pass a negative
offset (from a preceding failed attempt to seek to EOF) to this use
of lseek.

udevGetUintProperty was called with base set to 0 for busnum and devnum.
With base 0 strtoul parses the number as octal if it start with a 0. But
busnum and devnum are decimal and udev returns them padded with leading
zeros. So strtoul parses them as octal. This works for certain decimal
values like 001-007, but fails for values like 008.

Change udevProcessUSBDevice to use base 10 for busnum and devnum.

* src/util/util.c (virGetUserID, virGetGroupID): In the unlikely event
that sysconf(_SC_GETPW_R_SIZE_MAX) fails, don't use -1 as the size in
the subsequent allocation.

* src/util/json.c (virJSONValueFree): Free the "value" pointer, too.

* src/qemu/qemu_monitor_text.c (qemuMonitorTextGetAllPCIAddresses):
Use %s.
* src/storage/storage_backend_iscsi.c (virStorageBackendCreateIfaceIQN):
Likewise.
* tools/virsh.c (cmdSecretSetValue): Likewise.

* src/internal.h (STREQ, STRCASEEQ, STRNEQ, STRCASENEQ, STREQLEN)
(STRCASEEQLEN, STRNEQLEN, STRCASENEQLEN, STRPREFIX): Avoid
redundant parenthesis.
* examples/domain-events/events-c/event-test.c (STREQ): Likewise.
* src/storage/parthelper.c (STREQ): Likewise.

Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

* src/libvirt.c: extend the debug statement to log flags too

Similar to the race fixed by
be34c3c7, make sure
to wait around for KVM to release the resources from
a hot-detached PCI device before attempting to
rebind that device to the host driver.
Signed-off-by: NChris Lalancette <clalance@redhat.com>

The QEMU driver contained code to generate a -device string for piix4-ide, but
wasn't using it. This change removes this string generation. It also adds a
comment explaining why IDE and FDC controllers don't generate -device strings.

The change also generates an error if a sata controller is specified for a QEMU
domain, as this isn't supported.

* src/qemu/qemu_conf.c: Remove VIR_DOMAIN_CONTROLLER_TYPE_IDE handler in
  qemuBuildControllerDevStr(). Ignore IDE and FDC controllers. Error if
  SATA controller is discovered. Add comments.

Signed-off-by: NChris Lalancette <clalance@redhat.com>

On RHEL-5 the qemu-kvm binary is located in /usr/libexec.
To reduce confusion for people trying to run upstream libvirt
on RHEL-5 machines, make the qemu driver look in /usr/libexec
for the qemu-kvm binary.

To make this work, I modified virFindFileInPath to handle an
absolute path correctly.  I also ran into an issue where
NULL was sometimes being passed for the file parameter
to virFindFileInPath; it didn't crash prior to this patch
since it was building paths like /usr/bin/(null).  This
is non-standard behavior, though, so I added a NULL
check at the beginning.
Signed-off-by: NChris Lalancette <clalance@redhat.com>

* HACKING: STRCASEEQ is case insensitive.
* docs/hacking.html.in: Likewise.

* src/util/util.c (virGetUserEnt): In the unlikely event that
sysconf(_SC_GETPW_R_SIZE_MAX) fails, don't use -1 as the size in
the subsequent allocation.

xen-unstable c/s 20762 bumped XEN_SYSCTL_INTERFACE_VERSION to 7.  The
interface change does not affect libvirt, other than xenHypervisorInit()
failing since version 7 is not tried.

The attached patch accommodates the upcoming Xen 4.0 release by checking
for XEN_SYSCTL_INTERFACE_VERSION 7.  If found, it sets
XEN_DOMCTL_INTERFACE_VERSION to 6, which is also new to Xen 4.0.

* docs/schemas/domain.rng: Add sata controller type

* src/cpu/cpu_x86.c (x86Decode): Do not dereference NULL
when "models" is NULL and nmodels is 1 or greater.

it causes a NULL-dereference on some systems like Solaris 10.
* src/node_device/node_device_linux_sysfs.c. Include <stdlib.h>.
(get_sriov_function): Use canonicalize_file_name, not realpath.
* bootstrap (modules): Add canonicalize-lgpl.

* src/util/pci.c (pciDeviceDownstreamLacksACS): Fix a typo
that rendered a subexpression always false.

This fixes a segfault when the event handler is called after shutdown
when the global driver state is NULL again.

Also fix a locking issue in an error path.

This fixes a segfault in the remote driver that occurs for example when
the event-test is run inside a domain-0 and libvirtd is also running.

* src/util/hostusb.c (usbSysReadFile): Rename labels s/error/cleanup/
(usbFindBusByVendor): Likewise.  And closedir only if non-NULL.

virFileMakePath is a recursive function that was creates a buffer
PATH_MAX bytes long for each recursion (one recursion for each element
in the path). This changes it to have no buffers on the stack, and to
allocate just one buffer total, no matter how many elements are in the
path. Because the modified algorithm requires a char* to be passed in
rather than const char *, it is now 2 functions - a toplevel API
function that remains identical in function, and a 2nd helper function
called for the recursions, which 1) doesn't allocate anything, and 2)
takes a char* arg, so it can modify the contents.
* src/util/util.c: rewrite virFileMakePath

This reverts commit cdc42d0a.
As DanB pointed out, this patch is actually wrong.  The real
bug that was causing me to see this problem is a bug
introduced in a RHEL-5 libvirt snapshot, and I'm going to
fix the real bug there.
Signed-off-by: NChris Lalancette <clalance@redhat.com>

If you shutdown libvirtd while a domain with PCI
devices is running, then try to restart libvirtd,
libvirtd will crash.

This happens because qemuUpdateActivePciHostdevs() is calling
pciDeviceListSteal() with a dev of 0x0 (NULL), and then trying
to dereference it.  This patch fixes it up so that
qemuUpdateActivePciHostdevs() steals the devices after first
Get()'ting them, avoiding the crash.
Signed-off-by: NChris Lalancette <clalance@redhat.com>

Signed-off-by: NChris Lalancette <clalance@redhat.com>

* src/qemu/qemu_monitor_text.c (qemuMonitorTextAttachDrive): Most other
failures in this function would "goto cleanup", but one mistakenly
returned directly, skipping the cleanup and resulting in a leak.
In addition, iterating the "try_command" loop would clobber, and
thus leak, the "cmd" allocated on the first iteration,
so be careful to free it in addition to "reply" beforehand.