We can easily handle receiving garbage on sync. We don't
have to make client deal with this situation. We just
need to resend sync command but this time garbage is
not be possible.

When we wait for sync reply we can receive delayed
reply to syncs or commands that were sent erlier. We can
safely skip them until we receive sync reply with correct id.
There is no much sense report this situation to client.
Actually with a bit of "luck" if we involve client into
this the play can go on forever: send sync 0, receive
sync reply -1, send sync 1, receive reply 0 ...

After sync is sent we can receive garbare and this is not error.
Consider next regular case:

1. libvirtd sends sync
2. qga sends partial sync reply and die
3. libvirtd sends sync
4. qga sends sync reply
5. libvirtd receives garbage
  (half of first reply and second reply together)

We should handle this situation as it is recoverable.
Next sync can succeed. Let's report reply is NULL,
it will be converted to the VIR_ERR_AGENT_UNSYNCED
which signals client to retry.

Errors in qemuAgentIOProcessLine stop agent IO processing just
like any regular IO error, however some of current errors
that this functions spawns are false positives. Consider
next case for example:

1. send sync (unsynced state)
2. receive sync reply (sync established)
3. command send, but timeout occured (unsynced state)
4. receive command reply

Last IO triggers error because current code ignores
only delayed syncs when unsynced

We should not treat any delayed reply as error in unsynced
state. Until client and qga are not in sync delayed reply to any
command is possible. msg == NULL is the exact criterion
that we are not in sync.

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

There will be more backends in the future so let's not complicate it.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Put it into qemuDomainPrepareShmemChardev() so it can be used later.
Also don't fill in the path unless the server option is enabled.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Always format id first so that we don't need to do that twice in
different code paths.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Some checks will need to be performed for newer device types as well, so
let's not duplicate them.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

This will make sense after adding support for newer device types.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

It isn't used anywhere else.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Commit 839a0608 tied the lifecycle of virtlogd more
closely to that of libvirtd. Unfortunately, while starting
virtlogd when libvirtd is started is definitely a good idea,
restarting virtlogd or shutting it down at any time outside
of system poweroff is not.

Revert part of that commit by removing the PartOf= lines,
meaning that only startup requests will be propagated from
libvirtd to virtlogd.

Resolves: https://bugzilla.redhat.com/1372576

Make use of the new recently introduced alias handling for virt-admin srv-*
commands.
Signed-off-by: NErik Skultety <eskultet@redhat.com>

Change the logic in a way, so that VSH_CMD_FLAG_ALIAS behaves similarly to
how VSH_OT_ALIAS for command options, i.e. there is no need for code duplication
for the alias and the aliased command structures. Along with that change,
switch any existing VSH_CMD_FLAG_ALIAS occurrences to this new format. Also,
since this patch introduces a new command structure element, adjust the
virsh-self-test test to make sure we won't ever miss to specify the '.alias'
member for an aliased command because doing that would lead to an internal
error.
Signed-off-by: NErik Skultety <eskultet@redhat.com>

The command is deprecated due to being grammatically incorrect, but for
backwards compatibility reasons cannot be removed. However, we should not
document such commands.
Signed-off-by: NErik Skultety <eskultet@redhat.com>

Recent changes extracted the command internals validation routine from
vshCmddefOptParse method which now just calls vshCmddefOptFill. Therefore, make
vshCmddefOptFill the new vshCmddefOptParse and drop the unnecessary name.
Signed-off-by: NErik Skultety <eskultet@redhat.com>

Originally introduced by commit 2432521e which correctly split
vshCmddefOptParse into command's options validation and options parsing.
However, command's 'internals' are not tied solely to .options, rather it
should be about the overall structure, therefore the validation should be
extracted from vshCmddefOptParse and performed only within our test suite, i.e.
in vshSelfTest.
Signed-off-by: NErik Skultety <eskultet@redhat.com>

If the initial check is true the function immediately returns so there's no
need to enclose the code following the check within an 'else' block.
Also, by removing the 'else' block, the declarations need to be moved to
beginning of the function block to conform with our guidelines.
Signed-off-by: NErik Skultety <eskultet@redhat.com>

Since it's used on a single place only, it can easily be replaced by the right
side of the original assignment.
Signed-off-by: NErik Skultety <eskultet@redhat.com>

The intention is to move vshCmddefCheckInternals out of vshCmddefOptParse to
our test suite. First step to do that is to enforce checking for an existing
help string (that also means it's non-empty) in a command because a command
without a help is not much of a use.
Signed-off-by: NErik Skultety <eskultet@redhat.com>

The recent update to gnulib

  commit 9d7a37ec
  Author: Eric Blake <eblake@redhat.com>
  Date:   Thu Sep 15 15:12:52 2016 -0500

    build: update to latest gnulib

Pulled in a change that adds -fno-common to the default compiler
flags

  commit bf8e658ffadb95d444f56d222d04c9af955af765
  Author: Jim Meyering <meyering@fb.com>
  Date:   Fri Sep 2 09:16:16 2016 -0700

    manywarnings: add -fno-common

This caused libvirt Mingw build to break with the compiler
reporting 100's of definitions of virConnectAuthPtrDefault

./.libs/libvirt_util.a(libvirt_util_la-virarch.o):virarch.c:(.bss+0x0): multiple definition of `virConnectAuthPtrDefault'
./.libs/libvirt_util.a(libvirt_util_la-viralloc.o):viralloc.c:(.bss+0x0): first defined here
./.libs/libvirt_util.a(libvirt_util_la-viratomic.o):viratomic.c:(.bss+0x0): multiple definition of `virConnectAuthPtrDefault'
./.libs/libvirt_util.a(libvirt_util_la-viralloc.o):/home/berrange/src/virt/libvirt/src/util/viralloc.c:87: first defined here
./.libs/libvirt_util.a(libvirt_util_la-viraudit.o):viraudit.c:(.bss+0x0): multiple definition of `virConnectAuthPtrDefault'
./.libs/libvirt_util.a(libvirt_util_la-viralloc.o):/home/berrange/src/virt/libvirt/src/util/viralloc.c:87: first defined here
./.libs/libvirt_util.a(libvirt_util_la-virauth.o):virauth.c:(.bss+0x0): multiple definition of `virConnectAuthPtrDefault'
./.libs/libvirt_util.a(libvirt_util_la-viralloc.o):/home/berrange/src/virt/libvirt/src/util/viralloc.c:87: first defined here
./.libs/libvirt_util.a(libvirt_util_la-virauthconfig.o):virauthconfig.c:(.bss+0x0): multiple definition of `virConnectAuthPtrDefault'
...snip...

The cause is our VIR_EXPORT_VAR macro which has some
magic on win to add dllexport/dllimport to the variable
declaration. Unfortunately the dllexport branch missed
off the 'extern' keyword, so the header file was in
fact declaring an instance of the variable in every
source file.

Previously the linker would merge all these definitions
into one, but that no longer happens due to -fno-common
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

s/unitl/until
Signed-off-by: NChen Hanxiao <chenhanxiao@gmail.com>

Commit 85635600 switched from
hardcoded use of strcontent to hardcoded use of fixedcontent
(fixedcontent is *sometimes* a copy of strcontent with a \n
appended). This was a problem because sometimes fixedcontent is *not*
a copy of strcontent, but is instead NULL, leading to the regenerated
test case output being a 0 length file.

This patch creates a new const char *cmpcontent initialized to
strcontent, but changed to fixedcontent if/when fixedcontent is
created, then always uses cmpcontent instead of (str|fixed)content.

This reverts commit d53fa838,
which is no longer needed now that gnulib does the job.
Signed-off-by: NEric Blake <eblake@redhat.com>

In particular, pull in gnulib's fix for the broken AC_HEADER_MAJOR
macro in autoconf.
Signed-off-by: NEric Blake <eblake@redhat.com>

Now that we have two same implementations for getting path for
huge pages backed guest memory, lets merge them into one function.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

When trying to migrate a huge page enabled guest, I've noticed
the following crash. Apparently, if no specific hugepages are
requested:

  <memoryBacking>
    <hugepages/>
  </memoryBacking>

and there are no hugepages configured on the destination, we try
to dereference a NULL pointer.

Program received signal SIGSEGV, Segmentation fault.
0x00007fcc907fb20e in qemuGetHugepagePath (hugepage=0x0) at qemu/qemu_conf.c:1447
1447        if (virAsprintf(&ret, "%s/libvirt/qemu", hugepage->mnt_dir) < 0)
(gdb) bt
#0  0x00007fcc907fb20e in qemuGetHugepagePath (hugepage=0x0) at qemu/qemu_conf.c:1447
#1  0x00007fcc907fb2f5 in qemuGetDefaultHugepath (hugetlbfs=0x0, nhugetlbfs=0) at qemu/qemu_conf.c:1466
#2  0x00007fcc907b4afa in qemuBuildMemoryBackendStr (size=4194304, pagesize=0, guestNode=0, userNodeset=0x0, autoNodeset=0x0, def=0x7fcc70019070, qemuCaps=0x7fcc70004000, cfg=0x7fcc5c011800, backendType=0x7fcc95087228, backendProps=0x7fcc95087218,
    force=false) at qemu/qemu_command.c:3297
#3  0x00007fcc907b4f91 in qemuBuildMemoryCellBackendStr (def=0x7fcc70019070, qemuCaps=0x7fcc70004000, cfg=0x7fcc5c011800, cell=0, auto_nodeset=0x0, backendStr=0x7fcc70020360) at qemu/qemu_command.c:3413
#4  0x00007fcc907c0406 in qemuBuildNumaArgStr (cfg=0x7fcc5c011800, def=0x7fcc70019070, cmd=0x7fcc700040c0, qemuCaps=0x7fcc70004000, auto_nodeset=0x0) at qemu/qemu_command.c:7470
#5  0x00007fcc907c5fdf in qemuBuildCommandLine (driver=0x7fcc5c07b8a0, logManager=0x7fcc70003c00, def=0x7fcc70019070, monitor_chr=0x7fcc70004bb0, monitor_json=true, qemuCaps=0x7fcc70004000, migrateURI=0x7fcc700199c0 "defer", snapshot=0x0,
    vmop=VIR_NETDEV_VPORT_PROFILE_OP_MIGRATE_IN_START, standalone=false, enableFips=false, nodeset=0x0, nnicindexes=0x7fcc95087498, nicindexes=0x7fcc950874a0, domainLibDir=0x7fcc700047c0 "/var/lib/libvirt/qemu/domain-1-fedora") at qemu/qemu_command.c:9547
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Both qemu monitor and agent print the same
log on HUANGUP event, which would be confusing
when reading libvirtd log.

This patch will give a different log message to them.
Signed-off-by: NChen Hanxiao <chenhanxiao@gmail.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

The layout in $HOME/.pki is different from that in /etc/pki
but we never tell anyone about this trap. Add docs showing
the required $HOME/.pki layout.

This way we'll be able to hotplug with both --live and --config in one
API call.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

It already is used and tests will be automatically added in later patches.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Most of QEMU's PCI display device models, such as:

  libvirt video/model/@type  QEMU -device
  -------------------------  ------------
  cirrus                     cirrus-vga
  vga                        VGA
  qxl                        qxl-vga
  virtio                     virtio-vga

come with a linear framebuffer (sometimes called "VGA compatibility
framebuffer"). This linear framebuffer lives in one of the PCI device's
MMIO BARs, and allows guest code (primarily: firmware drivers, and
non-accelerated OS drivers) to display graphics with direct memory access.

Due to architectural reasons on aarch64/KVM hosts, this kind of
framebuffer doesn't / can't work in

  qemu-system-(arm|aarch64) -M virt

machines. Cache coherency issues guarantee a corrupted / unusable display.
The problem has been researched by several people, including kvm-arm
maintainers, and it's been decided that the best way (practically the only
way) to have boot time graphics for such guests is to consolidate on
QEMU's "virtio-gpu-pci" device.

>From <https://bugzilla.redhat.com/show_bug.cgi?id=1195176>, libvirt
supports

  <devices>
    <video>
      <model type='virtio'/>
    </video>
  </devices>

but libvirt unconditionally maps @type='virtio' to QEMU's "virtio-vga"
device model. (See the qemuBuildDeviceVideoStr() function and the
"qemuDeviceVideo" enum impl.)

According to the above, this is not right for the "virt" machine type; the
qemu-system-(arm|aarch64) binaries don't even recognize the "virtio-vga"
device model (justifiedly). Whereas "virtio-gpu-pci", which is a pure
virtio device without a compatibility framebuffer, is available, and works
fine.

(The ArmVirtQemu ("AAVMF") platform of edk2 -- that is, the UEFI firmware
for "virt" -- supports "virtio-gpu-pci", as of upstream commit
3ef3209d3028. See
<https://tianocore.acgmultimedia.com/show_bug.cgi?id=66>.)

Override the default mapping of "virtio", from "virtio-vga" to
"virtio-gpu-pci", if qemuDomainMachineIsVirt() evaluates to true.

Cc: Andrea Bolognani <abologna@redhat.com>
Cc: Drew Jones <drjones@redhat.com>
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: Martin Kletzander <mkletzan@redhat.com>
Suggested-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1372901Signed-off-by: NLaszlo Ersek <lersek@redhat.com>
Acked-by: NMartin Kletzander <mkletzan@redhat.com>

There is nothing Linux-specific in that function.  Also since commit
8c3b5bf4 mingw build is broken due to
the fact that this function is not compiled in the library.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Signed-off-by: NTomáš Ryšavý <tom.rysavy.0@gmail.com>

Signed-off-by: NTomáš Ryšavý <tom.rysavy.0@gmail.com>

Signed-off-by: NTomáš Ryšavý <tom.rysavy.0@gmail.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Signed-off-by: NTomáš Ryšavý <tom.rysavy.0@gmail.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>