Steps to reproduce this bug:
1. virsh attach-disk domain --source imagefile --target sdb --sourcetype file --driver qemu --subdriver raw
2. virsh detach-device controller.xml # remove scsi controller 0
3. virsh detach-disk domain sdb
   error: Failed to detach disk
   error: operation failed: detaching scsi0-0-1 device failed: Device 'scsi0-0-1' not found

I think we should not detach a controller when it is used by some other device.
Signed-off-by: NWen Congyang <wency@cn.fujitsu.com>

* python/tests/create.py: Use correct wording.

Alas, the shell is not a real programming language.

Patch generated by manual confirmation of vim's
s/[^"]\@<=\$\S\+\s\@=/"&"/gc
and
s/\(echo \)\@<=[^"].*\$.*$/"&"/c matches.

This patch generate a lot of noise and carries little benefits, as
I do not really expect $PKI to contain spaces or backticks. I'm just
fuming, and would not really mind if this patch is ignored

Try to avoid future regressions on the VPATH front.

* autobuild.sh: Uncomment VPATH use.
* .gitignore: Exclude build directory.

A diff of 'make dist' from in-tree vs. a VPATH build showed
that we were missing docs/api_extension/*.patch files, but
shipping other files that we didn't need.

* bootstrap.conf (gnulib_extra_files): Don't distribute files we
don't care about.
* docs/Makefile.am (patches): Perform wildcard correctly.

Right now, 'man libvirtd' includes information that depends on
configure results, so it must be generated on the fly and live
in $(builddir); however, requiring pod2man on all end user
machines is overkill.  Meanwhile, 'man virsh' doesn't mention
any configure results, so it can be built at 'make dist' time.
If that situation changes in the future, we can generate virsh.1
in the same way that we generate libvirtd.8.

* daemon/Makefile.am (libvirtd.8.in): New rule, to run pod2man in
advance of distribution.
(libvirtd.8): Use only sed from tarball.
(EXTRA_DIST): Ship new file.
(libvirtd.pod): Delete unused rule.
(man8_MANS): Let automake know which section to use.
(CLEANFILES, MAINTAINERCLEANFILES): Adjust to new files.
* tools/Makefile.am (dist_man1_MANS): Distribute pre-built man
pages, fine since they don't require any substitution.
(virt-xml-validate.1, virt-pki-validate.1): Change input source.
(virsh.1): Build into srcdir.
(CLEANFILES, MAINTAINERCLEANFILES): Adjust to new build style.
* daemon/.gitignore: Update.
Reported by Diego Elio Pettenò.

Done mechanically with:
$ git grep -l '\bDEBUG0\? *(' | xargs -L1 sed -i 's/\bDEBUG0\? *(/VIR_&/'

followed by manual deletion of qemudDebug in daemon/libvirtd.c, along
with a single 'make syntax-check' fallout in the same file, and the
actual deletion in src/util/logging.h.

* src/util/logging.h (DEBUG, DEBUG0): Delete.
* daemon/libvirtd.h (qemudDebug): Likewise.
* global: Change remaining clients over to VIR_DEBUG counterpart.

Two-argument free functions are uncommon; match the style elsewhere
by caching the callback at creation.

* src/util/hash.h (virHashCreate, virHashFree): Move deallocator
argument to creation.
* cfg.mk (useless_free_options): Add virHashFree.
* src/util/hash.c (_virHashTable): Track deallocator.
(virHashCreate, virHashFree): Update to new signature.
* src/conf/domain_conf.c (virDomainObjListDeinit)
(virDomainObjListInit, virDomainDiskDefForeachPath)
(virDomainSnapshotObjListDeinit, virDomainSnapshotObjListInit):
Update callers.
* src/conf/nwfilter_params.c (virNWFilterHashTableFree)
(virNWFilterHashTableCreate): Likewise.
* src/conf/nwfilter_conf.c (virNWFilterTriggerVMFilterRebuild):
Likewise.
* src/cpu/cpu_generic.c (genericHashFeatures, genericBaseline):
Likewise.
* src/xen/xm_internal.c (xenXMOpen, xenXMClose): Likewise.
* src/nwfilter/nwfilter_learnipaddr.c (virNWFilterLearnInit)
(virNWFilterLearnShutdown): Likewise.
* src/qemu/qemu_command.c (qemuDomainPCIAddressSetCreate)
(qemuDomainPCIAddressSetFree): Likewise.
* src/qemu/qemu_process.c (qemuProcessWaitForMonitor): Likewise.

XSLT allows for two ways of generating the output of transformation.
Either implicit, which xsltproc prints to stdout and can be redirected
to a file using -o file. Or explicit, which means the stylesheet
contains <xsl:document> element which specifies where the output should
be saved. This can be used for generating more files by a single run of
xsltproc and -o directory/ can change the directory where the output
files will be stored.

devhelp.xsl is special in that it combines both options in one
stylesheet, which doesn't work well with -o:

xsltproc --nonet -o ./devhelp/ ./devhelp/devhelp.xsl ./libvirt-api.xml

Outputs 4 *.html files into ./devhelp but then tries to write to
./devhelp/ as a file (hence the I/O error) rather than writing output to
the fifth file devhelp/libvirt.devhelp.

This patch modifies devhelp.xsl so that all files are generated using
<xsl:document> element and -o directory/ can be used to override output
directory where those files are saved.

The virConnectPtr struct will cache instances of all other
objects. APIs like virDomainLookupByUUID will return a
cached object, so if you do virDomainLookupByUUID twice in
a row, you'll get the same exact virDomainPtr instance.

This does not have any performance benefit, since the actual
logic in virDomainLookupByUUID (and other APIs returning
virDomainPtr, etc instances) is not short-circuited. All
it does is to ensure there is only one single virDomainPtr
in existance for any given UUID.

The caching has a number of downsides though, all relating
to stale data. If APIs aren't careful to always overwrite
the 'id' field in virDomainPtr it may become out of data.
Likewise for the name field, if a guest is renamed, or if
a guest is deleted, and then a new one created with the
same UUID but different name.

This has been an ongoing, endless source of bugs for all
applications using libvirt from languages with garbage
collection, causing them to get virDomainPtr instances
from long ago with stale data.

The caching is also a waste of memory resources, since
both applications, and language bindings often maintain
their own hashtable caches of object instances.

This patch removes all the hash table caching, so all
APIs return brand new virDomainPtr (etc) object instances.

* src/datatypes.h: Delete all hash tables.
* src/datatypes.c: Remove all object caching code

This patch adds the possibility to not just drop packets, but to also have them rejected where iptables at least sends an ICMP msg back to the originator. On ebtables this again maps into dropping packets since rejecting is not supported.

I am adding 'since 0.8.9' to the docs assuming this will be the next version of libvirt.

since dnsmasq >= 2.56 now bails out with empty arguments. See
    http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=613944
for the Debian bug and
    http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=589885
for the upstream reasoning.

Two regressions:
Commit df1011ca broke builds for systems that lack devmapper
(non-Linux, as well as Linux with ./autogen.sh --without-libvirtd
and without the libraries present).
Commit ce6fd650 broke cross-compilation, due to a gnulib bug.

* .gnulib: Update to latest, for cross-compilation fix.
* src/util/util.c (virIsDevMapperDevice): Provide stub for
platforms not using storage driver.
* configure.ac (devmapper): Arrange to define HAVE_LIBDEVMAPPER_H.
devmapper issue reported by Wen Congyang.

Etienne Gosset reported that libvirt fails to connect to his ESX
server because it failed to parse its malformed host UUID, that
contains an additional space and lacks one hexdigit in the last
group:

xxxxxxxx-xxxx-xxxx-xxxx- xxxxxxxxxxx

Don't treat this as a fatal error, just ignore it.

Virsh freecell --all was not only getting wrong NUMA nodes count, but
even the NUMA nodes IDs. They doesn't have to be continuous, as I've
found out during testing this. Therefore a modification of
nodeGetCellsFreeMemory() error message.

* configure.ac (gl_ASSERT_NO_GNULIB_POSIXCHECK): Use to reduce
time spent in configure.

$ ./configure
...
$ make
...
  GEN    libvirt.syms
...
$ ./configure --with-driver-modules
...
$ make
...

libvirt.syms doesn't get regenerated but it should as it should
contain virDriverLoadModule now.

* src/Makefile.am (libvirt.syms): Depend on configure changes.
Reported by Matthias Bolte.

Also cfg.mk is tweaked to force this for all future changes to *.py
files.

libvirt-guests invokes functions in gettext.sh, so we need to
require gettext package in spec file.

Demo with the fix:
% rpm -q gettext
package gettext is not installed

% rpm -ivh libvirt-client-0.8.8-1.fc14.x86_64.rpm
error: Failed dependencies:
	gettext is needed by libvirt-client-0.8.8-1.fc14.x86_64

* libvirt.spec.in

libvirt-tck was failing several domain tests [1] with qemu 0.14, which
is now less tolerable of specifying 2 bootroms with the same boot index [2].

Drop the 'boot=on' param if kernel has been specfied.

[1] https://www.redhat.com/archives/libvir-list/2011-February/msg00559.html
[2] http://lists.nongnu.org/archive/html/qemu-devel/2011-02/msg01892.html

There were several occurrences of an extra space inserted between
a function name and the ( opening the argument list in
datatypes.c. This is not consistent with the coding style used in
the rest of this file so removing this extra space makes the
code slightly more readable.

virHashFree follows the convention described in HACKING that
XXXFree() functions can be called with a NULL argument.

Now that the virHash handling functions call virReportOOMError by
themselves when needed, users of the virHash API no longer need to
do it by themselves. Since users of the virHash API were not
consistently calling virReportOOMError after memory failures from
the virHash code, this has the added benefit of making OOM
reporting from this code more consistent and reliable.

The only difference between these 2 functions is that one errors
out when the entry is already present while the other modifies
the existing entry. Add an helper function with a boolean argument
indicating whether existing entries should be updated or not, and
use this helper in both functions.

The code in virHashUpdateEntry and virHashAddEntry is really
similar. However, the latter rebalances the hash table when
one of its buckets contains too many elements while the former
does not. Fix this discrepancy.

* src/util/hash.c (virHashGrow) [DEBUG_GROW]: Use modern logging.
Reported by Christophe Fergeau.

This still doesn't fix {html,devhelp}/libvirt-{libvirt-virterror}.html,
but it's progress in the right direction.

* docs/Makefile.am (%.html): Build into srcdir.

When we attach a disk, but we specify a wrong format of disk image,
qemu monitor command drive_add will fail, but libvirt does not detect
this error.
Signed-off-by: NWen Congyang <wency@cn.fujitsu.com>

Followup to commit 17e19add, and would have prevented the bug
independently fixed in commit 76c57a7c.

* src/util/logging.c (virLogMessage): Preserve errno, since
logging should be as unintrusive as possible.

* .gnulib: update to latest gnulib for maint.mk fixes

This fixes https://bugzilla.redhat.com/show_bug.cgi?id=609463

The problem was that, since a bridge always acquires the MAC address
of the connected interface with the numerically lowest MAC, as guests
are started and stopped, it was possible for the MAC address to change
over time, and this change in the network was being detected by
Windows 7 (it sees the MAC of the default route change), so on each
reboot it would bring up a dialog box asking about this "new network".

The solution is to create a dummy tap interface with a MAC guaranteed
to be lower than any guest interface's MAC, and attach that tap to the
bridge as soon as it's created. Since all guest MAC addresses start
with 0xFE, we can just generate a MAC with the standard "0x52, 0x54,
0" prefix, and it's guaranteed to always win (physical interfaces are
never connected to these bridges, so we don't need to worry about
competing numerically with them).

Note that the dummy tap is never set to IFF_UP state - that's not
necessary in order for the bridge to take its MAC, and not setting it
to UP eliminates the clutter of having an (eg) "virbr0-nic" displayed
in the output of the ifconfig command.

I chose to not auto-generate the MAC address in the network XML
parser, as there are likely to be consumers of that API that don't
need or want to have a MAC address associated with the
bridge.

Instead, in bridge_driver.c when the network is being defined, if
there is no MAC, one is generated. To account for virtual network
configs that already exist when upgrading from an older version of
libvirt, I've added a %post script to the specfile that searches for
all network definitions in both the config directory
(/etc/libvirt/qemu/networks) and the state directory
(/var/lib/libvirt/network) that are missing a mac address, generates a
random address, and adds it to the config (and a matching address to
the state file, if there is one).

docs/formatnetwork.html.in: document <mac address.../>
docs/schemas/network.rng: add nac address to schema
libvirt.spec.in: %post script to update existing networks
src/conf/network_conf.[ch]: parse and format <mac address.../>
src/libvirt_private.syms: export a couple private symbols we need
src/network/bridge_driver.c:
    auto-generate mac address when needed,
    create dummy interface if mac address is present.
tests/networkxml2xmlin/isolated-network.xml
tests/networkxml2xmlin/routed-network.xml
tests/networkxml2xmlout/isolated-network.xml
tests/networkxml2xmlout/routed-network.xml: add mac address to some tests