QEMU has -fw_cfg which allows users to tweak how firmware
configures itself and/or provide new configuration blobs.
Introduce new <sysinfo/> type "fwcfg" that will hold these
new blobs.

It's possible to either specify new value as a string or
provide a filename which contents then serve as the value.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

There's no need to set ctxt->node outside of the function. The
function can set it itself - it has all the info needed.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

I think that since <qemu:commandline/> is kind of a hack, it
doesn't deserve place in the front row.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

This is convenience macro, use it more. This commit was generated
using the following spatch:

  @@
  symbol node;
  identifier old;
  identifier ctxt;
  type xmlNodePtr;
  @@
  - xmlNodePtr old;
  + VIR_XPATH_NODE_AUTORESTORE(ctxt);
    ...
  - old = ctxt->node;
    ... when != old
  - ctxt->node = old;

  @@
  symbol node;
  identifier old;
  identifier ctxt;
  type xmlNodePtr;
  @@
  - xmlNodePtr old = ctxt->node;
  + VIR_XPATH_NODE_AUTORESTORE(ctxt);
    ... when != old
  - ctxt->node = old;
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

https://gitlab.com/libvirt/libvirt/-/issues/13

Add support for downscript:

<interface type='ethernet'>
    <mac address='00:11:22:33:44:55'/>
    <script path='/etc/qemu-ifup'/>
    <downscript path='/path/to/my/downscript'/>
</interface>
Signed-off-by: NChen Hanxiao <chen_han_xiao@126.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

Remember the preferred placement of <auth> and <encryption> for a disk
source across libvirtd restarts.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

Modern way to store <auth> and <encryption> of a <disk> is under
<source>. This was added to mirror how <backingStore> handles these and
in fact they are relevant to the source rather than to any other part of
the disk. Historically we allowed them to be directly under <disk> and
we need to keep compatibility.

This wasn't a problem until introduction of -blockdev in qemu using of
<auth> or <encryption> plainly wouldn't work with backing chains.

Now that it works in backing chains and can be moved back and forth
using snapshots/block-commit we need to ensure that the original
placement is properly kept even if the source changes.

To achieve the above semantics we need to store the preferred placement
with the disk definition rather than the storage source definitions and
also ensure that the modern way is chosen when the VM started with
<source/encryption> only in the backing store.

https://bugzilla.redhat.com/show_bug.cgi?id=1822878Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

Instead of the following pattern:

  type ret;
  ...
  ret = func();
  return ret;

we can use:

  return func()

directly.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

This patch adds the implementation of the IBS pSeries feature,
using the QEMU_CAPS_MACHINE_PSERIES_CAP_IBS capability added
in the previous patch.

IBS can have the following values: "broken", "workaround",
"fixed-ibs", "fixed-ccd" and "fixed-na".

This is the XML format for the cap:

<features>
  <ibs value='fixed-ibs'/>
</features>
Signed-off-by: NDaniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

This patch adds the implementation of the SBBC pSeries feature,
using the QEMU_CAPS_MACHINE_PSERIES_CAP_SBBC capability added
in the previous patch.

Like the previously added CFPC feature, SBBC can have the values
"broken", "workaround" or "fixed". Extra code is required to handle
it since it's not a regular tristate capability.

This is the XML format for the cap:

<features>
  <sbbc value='workaround'/>
</features>
Signed-off-by: NDaniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

This patch adds the implementation of the CFPC pSeries feature,
using the QEMU_CAPS_MACHINE_PSERIES_CAP_CFPC capability added
in the previous patch.

CPFC can have the values "broken", "workaround" or "fixed". Extra
code is required to handle it since it's not a regular tristate
capability.

This is the XML format for the cap:

<features>
  <cfpc value='workaround'/>
</features>
Signed-off-by: NDaniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

This aio mode was added since Linux 5.1[1], QEMU 5.0.0[2], which will
deliever faster and more efficient I/O operations for the file,
host_device, host_cdrom backends.

Reference:
[1]: https://lwn.net/Articles/810414/
[2]: https://lists.gnu.org/archive/html/qemu-devel/2020-01/msg07686.htmlSigned-off-by: NHan Han <hhan@redhat.com>
Reviewed-by: NPeter Krempa <pkrempa@redhat.com>

The virDomainDefParseXML function has grown so large it broke the build:
../../src/conf/domain_conf.c:20362:1: error: stack frame size of 4168 bytes
in function 'virDomainDefParseXML' [-Werror,-Wframe-larger-than=]
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NPeter Krempa <pkrempa@redhat.com>

'passthrough' is Xen-Specific guest configuration option new to Xen 4.13
that enables IOMMU mappings for a guest and hence whether it supports PCI
passthrough. The default is disabled. See the xl.cfg(5) man page and
xen.git commit babde47a3fe for more details.

The default state of disabled prevents hotlugging PCI devices. However,
if the guest configuration contains a PCI passthrough device at time of
creation, libxl will automatically enable 'passthrough' and subsequent
hotplugging of PCI devices will also be possible. It is not possible to
unconditionally enable 'passthrough' since it would introduce a migration
incompatibility due to guest ABI change. Instead, introduce another Xen
hypervisor feature that can be used to enable guest PCI passthrough

  <features>
    <xen>
      <passthrough state='on'/>
    </xen>
  </features>

To allow finer control over how IOMMU maps to guest P2M table, the
passthrough element also supports a 'mode' attribute with values
restricted to snyc_pt and share_pt, similar to xl.cfg(5) 'passthrough'
setting .
Signed-off-by: NJim Fehlig <jfehlig@suse.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

e820_host is a Xen-specific option, only available for PV domains, that
provides the domain a virtual e820 memory map based on the host one. It
is enabled with a new Xen hypervisor feature, e.g.

  <features>
    <xen>
      <e820_host state='on'/>
    </xen>
  </features>

e820_host is required when using PCI passthrough and is generally
considered safe for any PV kernel. e820_host is silently ignored if set
in HVM domain configuration. See xl.cfg(5) man page in the Xen
documentation for more details.
Signed-off-by: NMarek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: NJim Fehlig <jfehlig@suse.com>

Starting with 3b076391
(v6.1.0-122-g3b076391) we support http cookies. Since they may contain
somewhat sensitive information we should not format them into the XML
unless VIR_DOMAIN_DEF_FORMAT_SECURE is asserted.
Reported-by: NHan Han <hhan@redhat.com>
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

a <controller type='pci'...> element can now have a "hotplug"
attribute in the <target> subelement. This is intended to control
whether or not the slot(s) of the controller support
hotplugging/unplugging a device:

   <controller type='pci' model='pcie-root-port'>
     <target hotplug='off'/>
   </controller>

The default value of hotplug is "on".

Since support for configuring such an option is hypervisor-dependent
(and will vary among different types of PCI controllers even on a
single hypervisor), no validation is done in this patch - that
validation will be done in the patch that wires support for the
setting into the hypervisor.
Signed-off-by: NLaine Stump <laine@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

Event channels are like PV interrupts and in conjuction with grant frames
form a data transfer mechanism for PV drivers. They are also used for
inter-processor interrupts. Guests with a large number of vcpus and/or
many PV devices many need to increase the maximum default value of 1023.
For this reason the native Xen config format supports the
'max_event_channels' setting. See xl.cfg(5) man page for more details.

Similar to the existing maxGrantFrames option, add a new xenbus controller
option 'maxEventChannels', allowing to adjust the maximum value via libvirt.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

Expose the virtio parameter for packed virtqueues as an optional libvirt
XML attribute to virtio-backed devices, e.g.:

    <interface type='user'>
      <mac address='00:11:22:33:44:55'/>
      <model type='virtio'/>
      <driver packed='on'/>
    </interface>

If the attribute is omitted, the default value for this attribute is 'off' and
regular split virtqueues are used.
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NBoris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: NBjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>

The virDomainGenerateMachineName() function doesn't belong in
src/conf/ really, because it has nothing to do with domain XML
parsing. It landed there because of lack of better place in the
past. But now that we have src/hypervisor/ the function should
live there. At the same time, the function name is changed to
match new location.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NDaniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

Introduce new 'multidevs' option for filesystem.

  <filesystem type='mount' accessmode='mapped' multidevs='remap'>
    <source dir='/path'/>
    <target dir='mount_tag'>
  </filesystem>

This option prevents misbehaviours on guest if a qemu 9pfs export
contains multiple devices, due to the potential file ID collisions
this otherwise may cause.
Signed-off-by: NChristian Schoenebeck <qemu_oss@crudebyte.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Add a new attribute for holding the query part for http(s) disks.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

The logic has been moved to the individual drivers.
Signed-off-by: NRafael Fonseca <r4f4rfs@gmail.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

The logic setting a device default should be in the post parse function
of individual driver code.
Signed-off-by: NRafael Fonseca <r4f4rfs@gmail.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

The logic setting a device default should be in the post parse function
of individual driver code.
Signed-off-by: NRafael Fonseca <r4f4rfs@gmail.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

The logic setting a device default should be in the post parse function
of individual driver code.
Signed-off-by: NRafael Fonseca <r4f4rfs@gmail.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

The logic setting a device default should be in the post parse function
of individual driver code.
Signed-off-by: NRafael Fonseca <r4f4rfs@gmail.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

The logic setting a device default should be in the post parse function
of individual driver code.
Signed-off-by: NRafael Fonseca <r4f4rfs@gmail.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

The logic setting a device default should be in the post parse function
of individual driver code.
Signed-off-by: NRafael Fonseca <r4f4rfs@gmail.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

VIR_TRISTATE_BOOL_ABSENT which maps to the 'default' string would not be
parsed back, so we shouldn't format it either.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

While 'namespace' is not a reserved word in C, it is in C++. Our
compilers are happy with it but syntax-hilighting in some editors
hilights is as a keyword. Rename it to prevent confusion.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

Using the 'uuid' element for ppc64 NVDIMM memory added in the
previous patch, use it in qemuBuildMemoryDeviceStr() to pass
it over to QEMU.

Another ppc64 restriction is the necessity of a mem->labelsize,
given than ppc64 only support label-area backed NVDIMMs.

Finally, we don't want ppc64 NVDIMMs to align up due to the
high risk of going beyond the end of file with a 256MiB
increment that the user didn't predict. Align it down
instead. If target size is less than the minimum of
256MiB + labelsize, error out since QEMU will error out
if we attempt to round it up to the minimum.
Signed-off-by: NDaniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

ppc64 NVDIMM support was implemented in QEMU by commit [1].
The support is similar to what x86 already does, aside from
an extra 'uuid' element.

This patch introduces a new optional 'uuid' element for the
NVDIMM memory model. This element behaves like the 'uuid'
element of the domain definition - if absent, we'll create
a new one, otherwise use the one provided by the XML.
The 'uuid' element is exclusive to pseries guests and are
unavailable for other architectures.

Next patch will use this new element to add NVDIMM support
for ppc64.

[1] https://github.com/qemu/qemu/commit/ee3a71e36654317b14ede0290e87628f8b79f850Signed-off-by: NDaniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

Use existing function built for this exact purpose.
Signed-off-by: NRafael Fonseca <r4f4rfs@gmail.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

So far, when using the qemu:///embed driver, management
applications can't chose whether they want to register their
domains in machined or not. While having that option is certainly
desired, it will require more work. What we can do meanwhile is
to generate names that include part of hash of the root
directory. This is to ensure that if two applications using
different roots but the same domain name (and ID) start the
domain no clashing name for machined is generated.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Some disk backends support configuring the readahead buffer or timeout
for requests. Add the knobs to the XML.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Add possibility to specify one or more cookies for http based disks.
This patch adds the config parser, storage and validation of the
cookies.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

To allow turning off verification of SSL cerificates add a new element
<ssl> to the disk source XML which will allow configuring the validation
process using the 'verify' attribute.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

According to the linked BZ, machined expects either valid
hostname or valid FQDN (see systemd commit
v239-3092-gd65652f1f2). While in case of multiple dots, a
trailing one doesn't violate FQDN, it does violate the rule in
case of something simple, like "domain.". But it's safe to remove
it in both cases.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1808499
Fixes: 45464db8Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>