Add output arguments generated with the latest qemu capabilities.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Add multiple drives with the various configurations rather than having
multiple tests.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

To allow using -blockdev with RBD we need to support the recently added
RBD authentication.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Based on qemu commit ab3257c281c1a1a91da1090ac9e38ddd8f860c63
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

We now take the schema from the qemucapabilitiestest data.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Add helpers that allow using the latest schema from the replies from an
actual qemu which are recorded for the purpose of the qemucapabilities
test instead of an unsynced copy stored in qemuqapischema.json.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

It builds the string for '-device' from a virDomainDiskDef.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Aggregate the code for the two separate formats used according to the
machine type and add some supporting code so that the function is
actually readable.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

qemuBulildFloppyCommandLineOptions built its own version of the -drive
alias. Replace it by qemuAliasDiskDriveFromDisk.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Further split qemuBuildDiskCommandLine to separate formatting of the
source part.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

SD card hotplug should not be implemented until they can be used via
-blockdev.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Change the semantics to exactly opposite and rename it to
qemuDiskBusNeedsDriveArg. This will be necessary as some devices can't
be used with -blockdev.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

We are testing character devices so the disk is not necessary. Minimize
the configuration. This will prevent changes when switching to blockdev.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

The sectors read from the backing image need to be written to the top
level image. If a disk is marked read-only the image can't be written.

QEMU handled that by disabling copy_on_read and reporting a warning:

-drive file=/var/lib/libvirt/images/c,format=qcow2,if=none,
    id=drive-scsi0-0-1,readonly=on,copy-on-read=on:
    warning: disabling copy-on-read on read-only drive
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

After commit c95f50cb we always set a disk format in the
post parse callback so the code that mandates use of explicit format for
shareable disks no longer makes sense.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

There wasn't an explicit type case to the video type enum in
qemuDomainDeviceDefValidateVideo, _TYPE_GOP was also missing from the
switch.
Signed-off-by: NErik Skultety <eskultet@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Move the video post parse bits into a separate helper as the logic is
going to be extended in the future.
Signed-off-by: NErik Skultety <eskultet@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Future patches rely on the ability to reset the contents of the
virDomainVideoDef structure rather than re-allocating it.
Signed-off-by: NErik Skultety <eskultet@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Since 133fb140 moved the validation of a video device into a separate
function, the code handling PCI slot assignment for video devices has
been the same for both the primary device and the secondary devices.
Let's merge these and thus handle all the devices within the existing
'for' loop.
Signed-off-by: NErik Skultety <eskultet@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

QEMU uses a shorthand '-sdl' which maps to '-display sdl'. However, if
there are any options to be passed to SDL, the full command version must
be used. Everything seemingly worked for us until commit 5038b300
introduced OpenGL support for SDL and added ',gl=on/off' option which as
mentioned above could have never worked with the shorthand version of
the command. Indeed starting a domain with an SDL display and OpenGL
enabled, QEMU produces a rather cryptic error:

-sdl: Could not open 'gl=on': No such file or directory

This patch provides fixes to both the SDL cmdline generation and the
test suite.
Signed-off-by: NErik Skultety <eskultet@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Signed-off-by: NErik Skultety <eskultet@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Adding the 'default' case to our enum-typecasted switches is the current
safety trend, so add it here for mdevs too.
Signed-off-by: NErik Skultety <eskultet@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

It should be the command line helper who takes care of the iteration
rather than the caller.
Signed-off-by: NErik Skultety <eskultet@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

It's pointless to check the same thing multiple times.
Fix the indentation along the way too.
Signed-off-by: NErik Skultety <eskultet@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Adding sata bus address support to the optional address parameter of virsh
attach-disk. The address is used as controller.bus.unit. e.g.
sata:0.0.0
Signed-off-by: NHan Han <hhan@redhat.com>

Adding usb bus address support to the optional address parameter
of virsh attach-disk. The address is used as bus:port. e.g. usb:1:1.
Signed-off-by: NHan Han <hhan@redhat.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Rename qemuBulildFloppyCommandLineOptions into
qemuBuildFloppyCommandLineOptions.
Signed-off-by: NBoris Fiuczynski <fiuczy@linux.ibm.com>

qemu changed the output field name for the architecture from 'arch' to
'target'. Note the change and fix the code so that the arch-specific
extraction works.

https://bugzilla.redhat.com/show_bug.cgi?id=1598829Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

The wraper is quite pointless and also the 'arch' field may depend on
whether query-cpus-fast is used.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

This function is called from various clean up paths (e.g.
from qemuBuildInterfaceCommandLine). However, depending on the
stage the interface creation process failed at, net->ifname might
still be not filled in when control jumps to cleanup label. If
that is the case return early (avoiding useless error message
produced in virNWFilterBindingLookupByPortDev) as there is no
NWFilter to tear down anyway.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

After 6b770f9a both @netsource and @srcprops are leaked
because of early return introduced in the commit.

==1812== 644 bytes in 4 blocks are definitely lost in loss record 835 of 885
==1812==    at 0x4C2F12F: realloc (vg_replace_malloc.c:785)
==1812==    by 0x8846393: xmlSaveUriRealloc (in /usr/lib64/libxml2.so.2.9.8)
==1812==    by 0x8846B1C: xmlSaveUri (in /usr/lib64/libxml2.so.2.9.8)
==1812==    by 0x5DDA619: virURIFormat (viruri.c:256)
==1812==    by 0x56E941B: qemuBuildNetworkDriveURI (qemu_command.c:781)
==1812==    by 0x56E979A: qemuBuildNetworkDriveStr (qemu_command.c:859)
==1812==    by 0x56F3A0B: qemuBuildSCSIiSCSIHostdevDrvStr (qemu_command.c:4664)
==1812==    by 0x56F3D1F: qemuBuildSCSIHostdevDrvStr (qemu_command.c:4732)
==1812==    by 0x56F57F7: qemuBuildHostdevCommandLine (qemu_command.c:5337)
==1812==    by 0x570303A: qemuBuildCommandLine (qemu_command.c:10376)
==1812==    by 0x57604EE: qemuProcessCreatePretendCmd (qemu_process.c:6649)
==1812==    by 0x11352A: testCompareXMLToArgv (qemuxml2argvtest.c:566)
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Instead of simply dumping the list of authors as obtained
from git, we can be a bit smarter and filter out maintainers
so that their names don't appear twice.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>

We can't do this in general, but for maintainers we have
the data in AUTHORS.in to use as a source of truth.

This gets rid of several duplicated lines in the generated
AUTHORS file.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>

The basic mailmap syntax works for simple cases, but
sometimes it requires two entiries or doesn't work at all;
switch to the more complex syntax in those cases.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>

Based on which of the two files has been updated most
recently, and what name is used for recent commits.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

While technically correct (you have to send patches for
your name to appear on the list) the remark was clearly
intended for a time before AUTHORS was partially generated
from the git log.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>

These two examples do not use any definition from config.h, and by
removing it these examples can be compiled standalone.
Signed-off-by: NMarcos Paulo de Souza <marcos.souza.org@gmail.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

This commit renames and adds other macros to support aother filesystems
when a reflink is performed. After that, XFS filesystems (and others)
with reflink support will be able to clone.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1565004Signed-off-by: NJulio Faracco <jcfaracco@gmail.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

This commit checks for xfs.h library to use XFS_IOC_CLONE which is
defined into that library file. So, after that it is possible to use
thie macro to create reflinks.
Signed-off-by: NJulio Faracco <jcfaracco@gmail.com>

When support was adding for passing a pre-opened listener socket to UNIX
chardevs, it accidentally passed the listener socket for client mode
chardevs too with predictable amounts of fail resulting. This affects
libvirt when using QEMU >= 2.12

Expand the unit test coverage to validate that we are only doing FD
passing when operating in server mode.

  https://bugzilla.redhat.com/show_bug.cgi?id=1598440Tested-by: NRichard W.M. Jones <rjones@redhat.com>
Reported-by: NRichard W.M. Jones <rjones@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>